linux-kernel - [PATCH v3 26/28] docs: i2c: rename sections so the overall picture is clearer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 29 Jan 2020 16:19:51 +0100
From:   Luca Ceresoli <luca@...aceresoli.net>
To:     linux-i2c@...r.kernel.org, linux-doc@...r.kernel.org
Cc:     Luca Ceresoli <luca@...aceresoli.net>,
        Wolfram Sang <wsa@...-dreams.de>,
        Jean Delvare <jdelvare@...e.de>, Peter Rosin <peda@...ntia.se>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v3 26/28] docs: i2c: rename sections so the overall picture is clearer


Some of the section names are not very clear. Reading those names in the
index.rst page does not help much in grasping what the content is supposed
to be.

Rename those sections to clarify their content, especially when reading
the index page.

Signed-off-by: Luca Ceresoli <luca@...aceresoli.net>
Acked-by: Peter Rosin <peda@...ntia.se>
Reviewed-by: Jean Delvare <jdelvare@...e.de>

---

Note: here checkpatch complains:

  WARNING: Missing or malformed SPDX-License-Identifier tag in line 1

Thas's because those files have no license line. I would gladly add a
proper license line, but what it the correct license here? Should I ask the
authors? GPLv2-only as the kernel default?

I'd appreciate a guidance here, thanks in advance.

---

Changes in v2:
 - summary.rst: "Introductions" -> "Introduction" (suggested by Jean Delvare)
---
 Documentation/i2c/dev-interface.rst         | 6 +++---
 Documentation/i2c/i2c-protocol.rst          | 6 +++---
 Documentation/i2c/i2c-topology.rst          | 6 +++---
 Documentation/i2c/old-module-parameters.rst | 6 +++---
 Documentation/i2c/smbus-protocol.rst        | 6 +++---
 Documentation/i2c/summary.rst               | 6 +++---
 Documentation/i2c/writing-clients.rst       | 6 +++---
 7 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/Documentation/i2c/dev-interface.rst b/Documentation/i2c/dev-interface.rst
index c3717a87df12..bdb247f2f11a 100644
--- a/Documentation/i2c/dev-interface.rst
+++ b/Documentation/i2c/dev-interface.rst
@@ -1,6 +1,6 @@
-====================
-I2C Device Interface
-====================
+============================================
+Implementing I2C device drivers in userspace
+============================================
 
 Usually, I2C devices are controlled by a kernel driver. But it is also
 possible to access all devices on an adapter from userspace, through
diff --git a/Documentation/i2c/i2c-protocol.rst b/Documentation/i2c/i2c-protocol.rst
index 9a4ac944cf9d..6aafc3880bce 100644
--- a/Documentation/i2c/i2c-protocol.rst
+++ b/Documentation/i2c/i2c-protocol.rst
@@ -1,6 +1,6 @@
-============
-I2C Protocol
-============
+================
+The I2C Protocol
+================
 
 This document describes the I2C protocol. Or will, when it is finished :-)
 
diff --git a/Documentation/i2c/i2c-topology.rst b/Documentation/i2c/i2c-topology.rst
index 2a18b53e3508..7cb53819778e 100644
--- a/Documentation/i2c/i2c-topology.rst
+++ b/Documentation/i2c/i2c-topology.rst
@@ -1,6 +1,6 @@
-============
-I2C topology
-============
+================================
+I2C muxes and complex topologies
+================================
 
 There are a couple of reasons for building more complex I2C topologies
 than a straight-forward I2C bus with one adapter and one or more devices.
diff --git a/Documentation/i2c/old-module-parameters.rst b/Documentation/i2c/old-module-parameters.rst
index 3b93cb88eebc..38e55829dee8 100644
--- a/Documentation/i2c/old-module-parameters.rst
+++ b/Documentation/i2c/old-module-parameters.rst
@@ -1,6 +1,6 @@
-=================================================
-I2C device driver binding control from user-space
-=================================================
+================================================================
+I2C device driver binding control from user-space in old kernels
+================================================================
 
 .. NOTE::
    Note: this section is only relevant if you are handling some old code
diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index 0edaf6069ac1..c122ed239f7f 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -1,6 +1,6 @@
-======================
-SMBus Protocol Summary
-======================
+==================
+The SMBus Protocol
+==================
 
 The following is a summary of the SMBus protocol. It applies to
 all revisions of the protocol (1.0, 1.1, and 2.0).
diff --git a/Documentation/i2c/summary.rst b/Documentation/i2c/summary.rst
index 09f73a608e25..ce7230025b33 100644
--- a/Documentation/i2c/summary.rst
+++ b/Documentation/i2c/summary.rst
@@ -1,6 +1,6 @@
-=============
-I2C and SMBus
-=============
+=============================
+Introduction to I2C and SMBus
+=============================
 
 I²C (pronounce: I squared C and written I2C in the kernel documentation) is
 a protocol developed by Philips. It is a slow two-wire protocol (variable
diff --git a/Documentation/i2c/writing-clients.rst b/Documentation/i2c/writing-clients.rst
index 44d97b2c9a82..82aa33c964d3 100644
--- a/Documentation/i2c/writing-clients.rst
+++ b/Documentation/i2c/writing-clients.rst
@@ -1,6 +1,6 @@
-===================
-Writing I2C Clients
-===================
+===============================
+Implementing I2C device drivers
+===============================
 
 This is a small guide for those who want to write kernel drivers for I2C
 or SMBus devices, using Linux as the protocol host/master (not slave).
-- 
2.25.0