lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200130083229.12889-9-wambui.karugax@gmail.com>
Date:   Thu, 30 Jan 2020 11:32:25 +0300
From:   Wambui Karuga <wambui.karugax@...il.com>
To:     jani.nikula@...ux.intel.com, joonas.lahtinen@...ux.intel.com,
        rodrigo.vivi@...el.com, airlied@...ux.ie, daniel@...ll.ch
Cc:     sean@...rly.run, intel-gfx@...ts.freedesktop.org,
        dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: [PATCH 08/12] drm/i915/sdvo: automatic conversion to drm_device based logging macros.

Converts instances of the printk based drm logging macros to the new
struct drm_device based logging macros in i915/display/intel_sdvo.c
This was done automatically using the following coccinelle script that
matches based on the existence of a drm_i915_private device pointer:
@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Checkpatch warnings were fixed manually.

Signed-off-by: Wambui Karuga <wambui.karugax@...il.com>
---
 drivers/gpu/drm/i915/display/intel_sdvo.c | 29 +++++++++++++----------
 1 file changed, 17 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c
index 225b6402718e..4ddb81428cab 100644
--- a/drivers/gpu/drm/i915/display/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/display/intel_sdvo.c
@@ -1477,7 +1477,8 @@ static void intel_sdvo_pre_enable(struct intel_encoder *intel_encoder,
 	else
 		intel_sdvo_get_dtd_from_mode(&output_dtd, mode);
 	if (!intel_sdvo_set_output_timing(intel_sdvo, &output_dtd))
-		DRM_INFO("Setting output timings on %s failed\n",
+		drm_info(&dev_priv->drm,
+			 "Setting output timings on %s failed\n",
 			 SDVO_NAME(intel_sdvo));
 
 	/* Set the input timing to the screen. Assume always input 0. */
@@ -1501,7 +1502,8 @@ static void intel_sdvo_pre_enable(struct intel_encoder *intel_encoder,
 	if (IS_TV(intel_sdvo_connector) || IS_LVDS(intel_sdvo_connector))
 		input_dtd.part2.sdvo_flags = intel_sdvo->dtd_sdvo_flags;
 	if (!intel_sdvo_set_input_timing(intel_sdvo, &input_dtd))
-		DRM_INFO("Setting input timings on %s failed\n",
+		drm_info(&dev_priv->drm,
+			 "Setting input timings on %s failed\n",
 			 SDVO_NAME(intel_sdvo));
 
 	switch (crtc_state->pixel_multiplier) {
@@ -1622,7 +1624,7 @@ static void intel_sdvo_get_config(struct intel_encoder *encoder,
 		 * Some sdvo encoders are not spec compliant and don't
 		 * implement the mandatory get_timings function.
 		 */
-		DRM_DEBUG_DRIVER("failed to retrieve SDVO DTD\n");
+		drm_dbg(&dev_priv->drm, "failed to retrieve SDVO DTD\n");
 		pipe_config->quirks |= PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS;
 	} else {
 		if (dtd.part2.dtd_flags & DTD_FLAG_HSYNC_POSITIVE)
@@ -1813,8 +1815,9 @@ static void intel_enable_sdvo(struct intel_encoder *encoder,
 	 * a given it the status is a success, we succeeded.
 	 */
 	if (success && !input1) {
-		DRM_DEBUG_KMS("First %s output reported failure to "
-				"sync\n", SDVO_NAME(intel_sdvo));
+		drm_dbg_kms(&dev_priv->drm,
+			    "First %s output reported failure to "
+			    "sync\n", SDVO_NAME(intel_sdvo));
 	}
 
 	if (0)
@@ -2226,8 +2229,8 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 	struct drm_i915_private *dev_priv = to_i915(connector->dev);
 	struct drm_display_mode *newmode;
 
-	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
-		      connector->base.id, connector->name);
+	drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s]\n",
+		    connector->base.id, connector->name);
 
 	/*
 	 * Fetch modes from VBT. For SDVO prefer the VBT mode since some
@@ -3276,8 +3279,9 @@ bool intel_sdvo_init(struct drm_i915_private *dev_priv,
 		u8 byte;
 
 		if (!intel_sdvo_read_byte(intel_sdvo, i, &byte)) {
-			DRM_DEBUG_KMS("No SDVO device found on %s\n",
-				      SDVO_NAME(intel_sdvo));
+			drm_dbg_kms(&dev_priv->drm,
+				    "No SDVO device found on %s\n",
+				    SDVO_NAME(intel_sdvo));
 			goto err;
 		}
 	}
@@ -3300,8 +3304,9 @@ bool intel_sdvo_init(struct drm_i915_private *dev_priv,
 
 	if (intel_sdvo_output_setup(intel_sdvo,
 				    intel_sdvo->caps.output_flags) != true) {
-		DRM_DEBUG_KMS("SDVO output failed to setup on %s\n",
-			      SDVO_NAME(intel_sdvo));
+		drm_dbg_kms(&dev_priv->drm,
+			    "SDVO output failed to setup on %s\n",
+			    SDVO_NAME(intel_sdvo));
 		/* Output_setup can leave behind connectors! */
 		goto err_output;
 	}
@@ -3338,7 +3343,7 @@ bool intel_sdvo_init(struct drm_i915_private *dev_priv,
 						    &intel_sdvo->pixel_clock_max))
 		goto err_output;
 
-	DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, "
+	drm_dbg_kms(&dev_priv->drm, "%s device VID/DID: %02X:%02X.%02X, "
 			"clock range %dMHz - %dMHz, "
 			"input 1: %c, input 2: %c, "
 			"output 1: %c, output 2: %c\n",
-- 
2.25.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ