[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200131143436.GA14822@bogus>
Date: Fri, 31 Jan 2020 08:34:36 -0600
From: Rob Herring <robh@...nel.org>
To: Sibi Sankar <sibis@...eaurora.org>
Cc: bjorn.andersson@...aro.org, srinivas.kandagatla@...aro.org,
tsoni@...eaurora.org, agross@...nel.org, mark.rutland@....com,
linux-arm-msm@...r.kernel.org, linux-remoteproc@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v3 2/3] dt-bindings: soc: qcom: apr: Add protection
domain bindings
On Mon, Dec 30, 2019 at 10:30:07AM +0530, Sibi Sankar wrote:
> Add optional "qcom,protection-domain" bindings for APR services. This
> helps to capture the dependencies between APR services and the PD on
> which each apr service run.
This is meaningless to me...
> Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> Signed-off-by: Sibi Sankar <sibis@...eaurora.org>
> ---
> .../devicetree/bindings/soc/qcom/qcom,apr.txt | 59 +++++++++++++++++++
> 1 file changed, 59 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> index db501269f47b8..f87c0b2a48de4 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
> @@ -45,6 +45,12 @@ by the individual bindings for the specific service
> 12 - Ultrasound stream manager.
> 13 - Listen stream manager.
>
> +- qcom,protection-domain
> + Usage: optional
> + Value type: <stringlist>
> + Definition: Must list the protection domain service name and path
> + that the particular apr service has a dependency on.
How many strings can there be and can you enumerate the possible
strings?
> +
> = EXAMPLE
> The following example represents a QDSP based sound card on a MSM8996 device
> which uses apr as communication between Apps and QDSP.
> @@ -82,3 +88,56 @@ which uses apr as communication between Apps and QDSP.
> ...
> };
> };
> +
> += EXAMPLE 2
> +The following example represents a QDSP based sound card on SDM845 device.
> +Here the apr services are dependent on "avs/audio" service running on AUDIO
> +Protection Domain hosted on ADSP remote processor.
> +
> + apr {
> + compatible = "qcom,apr-v2";
> + qcom,glink-channels = "apr_audio_svc";
> + qcom,apr-domain = <APR_DOMAIN_ADSP>;
> +
> + q6core {
> + compatible = "qcom,q6core";
> + reg = <APR_SVC_ADSP_CORE>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + };
> +
> + q6afe: q6afe {
> + compatible = "qcom,q6afe";
> + reg = <APR_SVC_AFE>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + q6afedai: dais {
> + compatible = "qcom,q6afe-dais";
> + #sound-dai-cells = <1>;
> +
> + qi2s@22 {
> + reg = <22>;
> + qcom,sd-lines = <3>;
> + };
> + };
> + };
> +
> + q6asm: q6asm {
> + compatible = "qcom,q6asm";
> + reg = <APR_SVC_ASM>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
> + q6asmdai: dais {
> + compatible = "qcom,q6asm-dais";
> + #sound-dai-cells = <1>;
> + iommus = <&apps_smmu 0x1821 0x0>;
> + };
> + };
> +
> + q6adm: q6adm {
> + compatible = "qcom,q6adm";
> + reg = <APR_SVC_ADM>;
> + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
Perhaps an example where not everything is the same. The example shows
me this isn't needed in DT.
> + q6routing: routing {
> + compatible = "qcom,q6adm-routing";
> + #sound-dai-cells = <0>;
> + };
> + };
> + };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
Powered by blists - more mailing lists