| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200131175528.m7t6bpd74cuknyht@pburton-laptop>
Date: Fri, 31 Jan 2020 09:55:28 -0800
From: Paul Burton <paulburton@...nel.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, linux-mips@...r.kernel.org
Subject: [GIT PULL] MIPS changes
Hi Linus,
Here are the main MIPS changes for 5.6. My apologies that they're coming
at the end of the week rather than the start, but there's nothing too
big or scary in here. Please pull.
There's one minor conflict with current master, in the DT
vendor-prefixes.yaml file. The correct resolution is of course to keep
both additions:
diff --cc Documentation/devicetree/bindings/vendor-prefixes.yaml
index 1bc7b3c4b591,31b364107e60..7fcd48adc276
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@@ -1082,8 -1062,8 +1084,10 @@@ patternProperties
description: Xilinx
"^xunlong,.*":
description: Shenzhen Xunlong Software CO.,Limited
+ "^xylon,.*":
+ description: Xylon
+ "^yna,.*":
+ description: YSH & ATIL
"^yones-toptech,.*":
description: Yones Toptech Co., Ltd.
"^ysoft,.*":
Thanks,
Paul
The following changes since commit c79f46a282390e0f5b306007bf7b11a46d529538:
Linux 5.5-rc5 (2020-01-05 14:23:27 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git tags/mips_5.6
for you to fetch changes up to 2c4288719806ca0b3de1b742ada26b25a60d6a45:
MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel (2020-01-24 11:37:45 -0800)
----------------------------------------------------------------
The main MIPS changes for 5.6:
- Support mremap() for the VDSO, primarily to allow CRIU to restore the
VDSO to its checkpointed location.
- Restore the MIPS32 cBPF JIT, after having reverted the enablement of
the eBPF JIT for MIPS32 systems in the 5.5 cycle.
- Improve cop0 counter synchronization behaviour whilst onlining CPUs by
running with interrupts disabled.
- Better match FPU behaviour when emulating multiply-accumulate
instructions on pre-r6 systems that implement IEEE754-2008 style MACs.
- Loongson64 kernels now build using the MIPS64r2 ISA, allowing them to
take advantage of instructions introduced by r2.
- Support for the Ingenic X1000 SoC & the really nice little CU Neo
development board that's using it.
- Support for WMAC on GARDENA Smart Gateway devices.
- Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in
preparation for introducing IP35 (Origin 3*) support.
- Various Kconfig & Makefile cleanups.
----------------------------------------------------------------
Alexander Lobakin (8):
MIPS: fix indentation of the 'RELOCS' message
MIPS: boot: fix typo in 'vmlinux.lzma.its' target
MIPS: syscalls: fix indentation of the 'SYSNR' message
MIPS: don't explicitly select LIBFDT in Kconfig
MIPS: generic: don't unconditionally select PINCTRL
MIPS: make CPU_HAS_LOAD_STORE_LR opt-out
MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again)
Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel"
Colin Ian King (1):
MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too"
Geert Uytterhoeven (2):
MIPS: ip22-gio: Make gio_match_device() static
tc: Make tc_match_device() static
Guoyun Sun (1):
mips/vdso: Support mremap() for vDSO
James Hogan (1):
MAINTAINERS: Drop James Hogan as MIPS maintainer
Jiaxun Yang (6):
dt-bindings: Document loongson vendor-prefix
MIPS: Add MAC2008 Support
MIPS: Loongson64: Select mac2008 only feature
MIPS: Make DIEI support as a config option
MIPS: Loongson64: Bump ISA level to MIPSR2
MIPS: Loongson64: Disable exec hazard
Julia Lawall (1):
MIPS: use resource_size
Kees Cook (1):
MIPS: BPF: Use sizeof_field() instead of FIELD_SIZEOF()
Mao Wenan (1):
MIPS: Loongson2ef: drop pointless static qualifier in loongson_suspend_enter()
Paul Burton (1):
MIPS: BPF: Restore MIPS32 cBPF JIT
Reto Schneider (3):
MIPS: ralink: dts: mt7628a.dtsi: Add WMAC DT node
MIPS: ralink: dts: gardena_smart_gateway_mt7688: Enable WMAC
MIPS: ralink: dts: gardena_smart_gateway_mt7688: Limit UART1
Sergey Korolev (1):
MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts
Thomas Bogendoerfer (22):
MIPS: SGI-IP27: Fix node_distance
MIPS: Loongson64: Fix node_distance()
MIPS: mm: Place per_cpu on different nodes, if NUMA is enabled
MIPS: SGI-IP27: use nodemask instead of cpumask
MIPS: SGI-IP27: use cpu physid already present while scanning for CPUs
MIPS: SGI-IP27: use asm/sn/agent.h for including HUB related stuff
MIPS: SGI-IP27: get rid of asm/sn/sn0/ip27.h
MIPS: SGI-IP27: move IP27 specific macro to IP27 specific header file
MIPS: SGI-IP27: Move get_nasid() to a IP27 specific file
MIPS: SGI-IP27: Split kldir.h into generic SN and IP27 parts
MIPS: SGI-IP27: Use union instead of typedef
MIPS: SGI-IP27: Use structs for decoding error status registers
MIPS: SGI-IP27: Use specific get_region_shift
MIPS: SGI-IP27: Move all shared IP27 declarations to ip27-common.h
MIPS: SGI-IP27: Only reserve interrupts used in Linux
MIPS: SGI-IP27: Store cpu speed when scanning for CPUs and use it later
MIPS: SGI-IP27: No need for slice_map
MIPS: PCI: Support mapping of INTB/C/D for pci-xtalk-bridge
MIPS: SGI-IP27: fix readb/writeb addressing
mfd: ioc3: Add driver for SGI IOC3 chip
MIPS: SGI-IP30: Check for valid pointer before using it
MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel
Tiezhu Yang (1):
MIPS: Loongson: Fix potential NULL dereference in loongson3_platform_init()
Wang Xuerui (1):
MIPS: asm: local: add barriers for Loongson
Yangtao Li (1):
soc: lantiq: convert to devm_platform_ioremap_resource
yu kuai (1):
MIPS: ralink: add missing put_device in ill_acc_of_setup
周琰杰 (Zhou Yanjie) (7):
MIPS: Ingenic: Add Ingenic X1000 support.
dt-bindings: Document yna vendor-prefix.
dt-bindings: MIPS: Add Ingenic XBurst based boards.
MIPS: Ingenic: Add YSH & ATIL CU Neo board support.
MIPS: X1830: Add X1830 system type.
MIPS: Ingenic: Add missing nodes for X1000 and CU1000-Neo.
MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi.
.../devicetree/bindings/mips/ingenic/devices.yaml | 35 +
.../devicetree/bindings/vendor-prefixes.yaml | 4 +
MAINTAINERS | 1 -
arch/mips/Kconfig | 84 +-
arch/mips/Makefile.postlink | 2 +-
arch/mips/boot/Makefile | 2 +-
arch/mips/boot/dts/ingenic/Makefile | 1 +
arch/mips/boot/dts/ingenic/cu1000-neo.dts | 170 +++
arch/mips/boot/dts/ingenic/x1000.dtsi | 317 +++++
.../dts/ralink/gardena_smart_gateway_mt7688.dts | 8 +
arch/mips/boot/dts/ralink/mt7628a.dtsi | 10 +
arch/mips/cavium-octeon/octeon-irq.c | 2 +-
arch/mips/configs/cu1000-neo_defconfig | 117 ++
arch/mips/configs/generic/board-ocelot.config | 1 +
arch/mips/include/asm/Kbuild | 1 +
arch/mips/include/asm/bootinfo.h | 1 +
arch/mips/include/asm/cpu-features.h | 4 +
arch/mips/include/asm/cpu.h | 6 +-
arch/mips/include/asm/gio_device.h | 2 -
arch/mips/include/asm/hazards.h | 4 +-
arch/mips/include/asm/irqflags.h | 6 +-
arch/mips/include/asm/local.h | 4 +
.../mips/include/asm/mach-ip27/kernel-entry-init.h | 12 +-
arch/mips/include/asm/mach-ip27/mangle-port.h | 4 +-
arch/mips/include/asm/mach-ip27/mmzone.h | 4 +-
arch/mips/include/asm/mach-ip27/topology.h | 2 +-
.../asm/mach-loongson64/cpu-feature-overrides.h | 2 +
arch/mips/include/asm/mipsregs.h | 3 +
arch/mips/include/asm/pci/bridge.h | 3 +-
arch/mips/include/asm/serial.h | 18 -
arch/mips/include/asm/sn/arch.h | 3 -
arch/mips/include/asm/sn/hub.h | 17 -
arch/mips/include/asm/sn/intr.h | 17 -
arch/mips/include/asm/sn/ioc3.h | 42 +-
arch/mips/include/asm/sn/klconfig.h | 4 -
arch/mips/include/asm/sn/kldir.h | 193 +--
arch/mips/include/asm/sn/sn0/hub.h | 22 +
arch/mips/include/asm/sn/sn0/hubni.h | 8 +
arch/mips/include/asm/sn/sn0/ip27.h | 85 --
arch/mips/include/asm/sn/sn0/kldir.h | 186 +++
arch/mips/include/asm/sn/sn_private.h | 19 -
arch/mips/include/asm/sn/types.h | 4 +
arch/mips/jz4740/Kconfig | 10 +
arch/mips/jz4740/setup.c | 4 +
arch/mips/kernel/cpu-probe.c | 81 +-
arch/mips/kernel/setup.c | 6 +-
arch/mips/kernel/sync-r4k.c | 5 +
arch/mips/kernel/syscalls/Makefile | 2 +-
arch/mips/kernel/unaligned.c | 36 +-
arch/mips/lib/memcpy.S | 14 +-
arch/mips/lib/memset.S | 16 +-
arch/mips/lib/mips-atomic.c | 4 +-
arch/mips/loongson2ef/common/pm.c | 2 +-
arch/mips/loongson64/numa.c | 2 +-
arch/mips/loongson64/platform.c | 3 +
arch/mips/math-emu/cp1emu.c | 38 +-
arch/mips/math-emu/dp_maddf.c | 53 +-
arch/mips/math-emu/ieee754.h | 16 +
arch/mips/math-emu/ieee754int.h | 1 +
arch/mips/math-emu/sp_maddf.c | 53 +-
arch/mips/mm/init.c | 45 +
arch/mips/net/Makefile | 1 +
arch/mips/net/bpf_jit.c | 1270 ++++++++++++++++++++
arch/mips/net/bpf_jit_asm.S | 285 +++++
arch/mips/pci/pci-ip27.c | 2 +-
arch/mips/pci/pci-xtalk-bridge.c | 52 +-
arch/mips/ralink/ill_acc.c | 2 +
arch/mips/sgi-ip22/ip22-gio.c | 6 +-
arch/mips/sgi-ip27/ip27-berr.c | 40 +-
arch/mips/sgi-ip27/ip27-common.h | 12 +-
arch/mips/sgi-ip27/ip27-console.c | 5 +-
arch/mips/sgi-ip27/ip27-hubio.c | 8 +-
arch/mips/sgi-ip27/ip27-init.c | 25 +-
arch/mips/sgi-ip27/ip27-irq.c | 5 +-
arch/mips/sgi-ip27/ip27-klconfig.c | 51 -
arch/mips/sgi-ip27/ip27-klnuma.c | 16 +-
arch/mips/sgi-ip27/ip27-memory.c | 57 +-
arch/mips/sgi-ip27/ip27-nmi.c | 5 +-
arch/mips/sgi-ip27/ip27-reset.c | 2 +-
arch/mips/sgi-ip27/ip27-smp.c | 33 +-
arch/mips/sgi-ip27/ip27-timer.c | 48 +-
arch/mips/sgi-ip27/ip27-xtalk.c | 1 -
arch/mips/sgi-ip30/ip30-irq.c | 5 +-
arch/mips/vdso/genvdso.c | 13 +
drivers/mfd/Kconfig | 13 +
drivers/mfd/Makefile | 1 +
drivers/mfd/ioc3.c | 669 +++++++++++
drivers/net/ethernet/sgi/Kconfig | 5 +-
drivers/net/ethernet/sgi/ioc3-eth.c | 544 ++-------
drivers/rtc/rtc-m48t35.c | 11 +
drivers/soc/lantiq/fpi-bus.c | 4 +-
drivers/tc/tc-driver.c | 5 +-
drivers/tty/serial/8250/8250_ioc3.c | 98 ++
drivers/tty/serial/8250/Kconfig | 11 +
drivers/tty/serial/8250/Makefile | 1 +
95 files changed, 3888 insertions(+), 1239 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mips/ingenic/devices.yaml
create mode 100644 arch/mips/boot/dts/ingenic/cu1000-neo.dts
create mode 100644 arch/mips/boot/dts/ingenic/x1000.dtsi
create mode 100644 arch/mips/configs/cu1000-neo_defconfig
delete mode 100644 arch/mips/include/asm/serial.h
delete mode 100644 arch/mips/include/asm/sn/hub.h
delete mode 100644 arch/mips/include/asm/sn/sn0/ip27.h
create mode 100644 arch/mips/include/asm/sn/sn0/kldir.h
delete mode 100644 arch/mips/include/asm/sn/sn_private.h
create mode 100644 arch/mips/net/bpf_jit.c
create mode 100644 arch/mips/net/bpf_jit_asm.S
create mode 100644 drivers/mfd/ioc3.c
create mode 100644 drivers/tty/serial/8250/8250_ioc3.c
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists