lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon,  3 Feb 2020 17:09:17 +0200
From:   Tomer Maimon <tmaimon77@...il.com>
To:     jic23@...nel.org, knaack.h@....de, lars@...afoo.de,
        pmeerw@...erw.net, robh+dt@...nel.org, mark.rutland@....com,
        avifishman70@...il.com, tali.perry1@...il.com, venture@...gle.com,
        yuenn@...gle.com, benjaminfair@...gle.com, joel@....id.au
Cc:     linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, openbmc@...ts.ozlabs.org,
        Tomer Maimon <tmaimon77@...il.com>
Subject: [PATCH v2 2/2] iio: adc: modify NPCM reset support

Modify NPCM ADC reset support from
direct register access to reset controller support.

please make sure to modify NPCM adc device tree
parameters as described at nuvoton,npcm-adc.txt
document for using this change.

Signed-off-by: Tomer Maimon <tmaimon77@...il.com>
---
 drivers/iio/adc/npcm_adc.c | 30 +++++++++---------------------
 1 file changed, 9 insertions(+), 21 deletions(-)

diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c
index a6170a37ebe8..83bad2d5575d 100644
--- a/drivers/iio/adc/npcm_adc.c
+++ b/drivers/iio/adc/npcm_adc.c
@@ -14,6 +14,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/spinlock.h>
 #include <linux/uaccess.h>
+#include <linux/reset.h>
 
 struct npcm_adc {
 	bool int_status;
@@ -23,13 +24,9 @@ struct npcm_adc {
 	struct clk *adc_clk;
 	wait_queue_head_t wq;
 	struct regulator *vref;
-	struct regmap *rst_regmap;
+	struct reset_control *reset;
 };
 
-/* NPCM7xx reset module */
-#define NPCM7XX_IPSRST1_OFFSET		0x020
-#define NPCM7XX_IPSRST1_ADC_RST		BIT(27)
-
 /* ADC registers */
 #define NPCM_ADCCON	 0x00
 #define NPCM_ADCDATA	 0x04
@@ -106,13 +103,11 @@ static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel)
 					       msecs_to_jiffies(10));
 	if (ret == 0) {
 		regtemp = ioread32(info->regs + NPCM_ADCCON);
-		if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) {
+		if (regtemp & NPCM_ADCCON_ADC_CONV) {
 			/* if conversion failed - reset ADC module */
-			regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
-				     NPCM7XX_IPSRST1_ADC_RST);
+			reset_control_assert(info->reset);
 			msleep(100);
-			regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
-				     0x0);
+			reset_control_deassert(info->reset);
 			msleep(100);
 
 			/* Enable ADC and start conversion module */
@@ -186,7 +181,6 @@ static int npcm_adc_probe(struct platform_device *pdev)
 	struct npcm_adc *info;
 	struct iio_dev *indio_dev;
 	struct device *dev = &pdev->dev;
-	struct device_node *np = pdev->dev.of_node;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
 	if (!indio_dev)
@@ -199,6 +193,10 @@ static int npcm_adc_probe(struct platform_device *pdev)
 	if (IS_ERR(info->regs))
 		return PTR_ERR(info->regs);
 
+	info->reset = devm_reset_control_get(&pdev->dev, NULL);
+	if (IS_ERR(info->reset))
+		return PTR_ERR(info->reset);
+
 	info->adc_clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(info->adc_clk)) {
 		dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n");
@@ -211,16 +209,6 @@ static int npcm_adc_probe(struct platform_device *pdev)
 	div = div >> NPCM_ADCCON_DIV_SHIFT;
 	info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2);
 
-	if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) {
-		info->rst_regmap = syscon_regmap_lookup_by_compatible
-			("nuvoton,npcm750-rst");
-		if (IS_ERR(info->rst_regmap)) {
-			dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-rst\n");
-			ret = PTR_ERR(info->rst_regmap);
-			goto err_disable_clk;
-		}
-	}
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq <= 0) {
 		ret = -EINVAL;
-- 
2.22.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ