| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200204235552.7466-12-f.fainelli@gmail.com>
Date: Tue, 4 Feb 2020 15:55:51 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: linux-arm-kernel@...ts.infradead.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
bcm-kernel-feedback-list@...adcom.com (maintainer:BROADCOM IPROC ARM
ARCHITECTURE), Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
Sugaya Taichi <sugaya.taichi@...ionext.com>,
Andrew Jeffery <andrew@...id.au>,
Arnd Bergmann <arnd@...db.de>, Joel Stanley <joel@....id.au>,
Maxime Ripard <mripard@...nel.org>,
Vinod Koul <vkoul@...nel.org>,
"james.tai" <james.tai@...ltek.com>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list),
linux-rpi-kernel@...ts.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE)
Subject: [PATCH v2 11/12] dt-bindings: arm: Document Broadcom SoCs 'secondary-boot-reg'
Consolidate and move the 'secondary-boot-reg' property from the 3
existing binding documents into the main cpus.yaml documentation, also
make sure that the property is enforced when relevant.
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
.../arm/bcm/brcm,bcm11351-cpu-method.txt | 36 -----------------
.../arm/bcm/brcm,bcm23550-cpu-method.txt | 36 -----------------
.../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 39 -------------------
.../devicetree/bindings/arm/cpus.yaml | 33 ++++++++++++++++
4 files changed, 33 insertions(+), 111 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
deleted file mode 100644
index e3f996920403..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Broadcom Kona Family CPU Enable Method
---------------------------------------
-This binding defines the enable method used for starting secondary
-CPUs in the following Broadcom SoCs:
- BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
-
-The enable method is specified by defining the following required
-properties in the "cpu" device tree node:
- - enable-method = "brcm,bcm11351-cpu-method";
- - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register used to request the ROM holding pen
-code release a secondary CPU. The value written to the register is
-formed by encoding the target CPU id into the low bits of the
-physical start address it should jump to.
-
-Example:
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <0>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <1>;
- enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <0x3500417c>;
- };
- };
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
deleted file mode 100644
index a3af54c0e404..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Broadcom Kona Family CPU Enable Method
---------------------------------------
-This binding defines the enable method used for starting secondary
-CPUs in the following Broadcom SoCs:
- BCM23550
-
-The enable method is specified by defining the following required
-properties in the "cpu" device tree node:
- - enable-method = "brcm,bcm23550";
- - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register used to request the ROM holding pen
-code release a secondary CPU. The value written to the register is
-formed by encoding the target CPU id into the low bits of the
-physical start address it should jump to.
-
-Example:
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <0>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <1>;
- enable-method = "brcm,bcm23550";
- secondary-boot-reg = <0x3500417c>;
- };
- };
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
deleted file mode 100644
index 677ef9d9f445..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom Northstar Plus SoC CPU Enable Method
----------------------------------------------
-This binding defines the enable method used for starting secondary
-CPU in the following Broadcom SoCs:
- BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
-
-The enable method is specified by defining the following required
-properties in the corresponding secondary "cpu" device tree node:
- - enable-method = "brcm,bcm-nsp-smp";
- - secondary-boot-reg = <...>;
-
-The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register which should hold the common
-entry point for a secondary CPU. This entry is cpu node specific
-and should be added per cpu. E.g., in case of NSP (BCM58625) which
-is a dual core CPU SoC, this entry should be added to cpu1 node.
-
-
-Example:
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- reg = <0>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- enable-method = "brcm,bcm-nsp-smp";
- secondary-boot-reg = <0xffff042c>;
- reg = <1>;
- };
- };
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index c23c24ff7575..d7b181a44789 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -272,6 +272,39 @@ properties:
While optional, it is the preferred way to get access to
the cpu-core power-domains.
+ secondary-boot-reg:
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ description: |
+ Required for systems that have an "enable-method" property value of
+ "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".
+
+ This includes the following SoCs: |
+ BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550
+ BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
+
+ The secondary-boot-reg property is a u32 value that specifies the
+ physical address of the register used to request the ROM holding pen
+ code release a secondary CPU. The value written to the register is
+ formed by encoding the target CPU id into the low bits of the
+ physical start address it should jump to.
+
+if:
+ # If the enable-method property contains one of those values
+ properties:
+ enable-method:
+ contains:
+ enum:
+ - brcm,bcm11351-cpu-method
+ - brcm,bcm23550
+ - brcm,bcm-nsp-smp
+ # and if enable-method is present
+ required:
+ - enable-method
+
+then:
+ required:
+ - secondary-boot-reg
+
required:
- device_type
- reg
--
2.19.1
Powered by blists - more mailing lists