| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAD=FV=UEQ0mOXuDrSZrcJ8g6jb0eLf1Ttn+Mn7T6d2TpCMUcuA@mail.gmail.com>
Date: Wed, 5 Feb 2020 11:19:33 -0800
From: Doug Anderson <dianders@...omium.org>
To: Sharat Masetty <smasetty@...eaurora.org>
Cc: freedreno <freedreno@...ts.freedesktop.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>, dri-devel@...edesktop.org,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Jordan Crouse <jcrouse@...eaurora.org>,
Matthias Kaehlcke <mka@...omium.org>
Subject: Re: [PATCH v4 3/3] arm64: dts: qcom: sc7180: Add A618 gpu dt blob
Hi,
On Tue, Feb 4, 2020 at 11:02 PM Sharat Masetty <smasetty@...eaurora.org> wrote:
>
> This patch adds the required dt nodes and properties
> to enabled A618 GPU.
>
> Signed-off-by: Sharat Masetty <smasetty@...eaurora.org>
> ---
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 +++++++++++++++++++++++++++++++++++
> 1 file changed, 102 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index f3fcc5c..63fff15 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -1043,6 +1043,108 @@
> };
> };
>
> + gpu: gpu@...0000 {
> + compatible = "qcom,adreno-618.0", "qcom,adreno";
> + #stream-id-cells = <16>;
> + reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>,
> + <0 0x05061000 0 0x800>;
> + reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";
> + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> + iommus = <&adreno_smmu 0>;
> + operating-points-v2 = <&gpu_opp_table>;
> + qcom,gmu = <&gmu>;
> +
> + gpu_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-800000000 {
> + opp-hz = /bits/ 64 <800000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> + };
> +
> + opp-650000000 {
> + opp-hz = /bits/ 64 <650000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> + };
> +
> + opp-565000000 {
> + opp-hz = /bits/ 64 <565000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> + };
> +
> + opp-430000000 {
> + opp-hz = /bits/ 64 <430000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> + };
> +
> + opp-355000000 {
> + opp-hz = /bits/ 64 <355000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + };
> +
> + opp-267000000 {
> + opp-hz = /bits/ 64 <267000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + };
> +
> + opp-180000000 {
> + opp-hz = /bits/ 64 <180000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> + };
> + };
> + };
> +
> + adreno_smmu: iommu@...0000 {
> + compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2";
As per prior discussion "qcom,sc7180-smmu-v2" needs to be added to the bindings.
> + reg = <0 0x05040000 0 0x10000>;
> + #iommu-cells = <1>;
> + #global-interrupts = <2>;
> + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
> + <&gcc GCC_GPU_CFG_AHB_CLK>,
> + <&gcc GCC_DDRSS_GPU_AXI_CLK>;
> +
> + clock-names = "bus", "iface", "mem_iface_clk";
As per discussion in v3 [1], "mem_iface_clk" is new and needs to be
added to the bindings. Presumably that patch should be posted / Acked
by Rob before we land this dts.
Other than relying on un-posted bindings, this looks sane to me and
this patch lets me bring the GPU up on my sc7180-based board.
Reviewed-by: Douglas Anderson <dianders@...omium.org>
Tested-by: Douglas Anderson <dianders@...omium.org>
-Doug
[1] https://lore.kernel.org/r/1e29097cc1cdf18671379f6420f872b0@codeaurora.org
Powered by blists - more mailing lists