| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DB8PR04MB6747A8CA819635359CDC73B1841D0@DB8PR04MB6747.eurprd04.prod.outlook.com>
Date: Thu, 6 Feb 2020 11:30:26 +0000
From: "Z.q. Hou" <zhiqiang.hou@....com>
To: Andrew Murray <andrew.murray@....com>
CC: "linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"bhelgaas@...gle.com" <bhelgaas@...gle.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"arnd@...db.de" <arnd@...db.de>,
"mark.rutland@....com" <mark.rutland@....com>,
"l.subrahmanya@...iveil.co.in" <l.subrahmanya@...iveil.co.in>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"m.karthikeyan@...iveil.co.in" <m.karthikeyan@...iveil.co.in>,
Leo Li <leoyang.li@....com>,
"lorenzo.pieralisi@....com" <lorenzo.pieralisi@....com>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"will.deacon@....com" <will.deacon@....com>,
Mingkai Hu <mingkai.hu@....com>,
"M.h. Lian" <minghuan.lian@....com>,
Xiaowei Bao <xiaowei.bao@....com>
Subject: RE: [PATCHv9 03/12] PCI: mobiveil: Collect the interrupt related
operations into a routine
Hi Andrew,
Thanks a lot for your comments!
> -----Original Message-----
> From: Andrew Murray <andrew.murray@....com>
> Sent: 2020年1月13日 18:35
> To: Z.q. Hou <zhiqiang.hou@....com>
> Cc: linux-pci@...r.kernel.org; linux-arm-kernel@...ts.infradead.org;
> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org;
> bhelgaas@...gle.com; robh+dt@...nel.org; arnd@...db.de;
> mark.rutland@....com; l.subrahmanya@...iveil.co.in;
> shawnguo@...nel.org; m.karthikeyan@...iveil.co.in; Leo Li
> <leoyang.li@....com>; lorenzo.pieralisi@....com;
> catalin.marinas@....com; will.deacon@....com; Mingkai Hu
> <mingkai.hu@....com>; M.h. Lian <minghuan.lian@....com>; Xiaowei Bao
> <xiaowei.bao@....com>
> Subject: Re: [PATCHv9 03/12] PCI: mobiveil: Collect the interrupt related
> operations into a routine
>
> On Wed, Nov 20, 2019 at 03:45:37AM +0000, Z.q. Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@....com>
> >
> > Collect the interrupt initialization related operations into a new
> > routine to make it more readable.
>
> I prefer the word 'function' instead of routine. Also indicate why, not only is it
> nicer but it is in preparation for EP support.
Will replace the 'routine' with 'function', it is only used in RC mode, not used in EP mode.
>
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@....com>
> > ---
> > V9:
> > - New patch splited from the #1 of V8 patches to make it easy to review.
> >
> > drivers/pci/controller/pcie-mobiveil.c | 65
> > +++++++++++++++++---------
> > 1 file changed, 42 insertions(+), 23 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pcie-mobiveil.c
> > b/drivers/pci/controller/pcie-mobiveil.c
> > index 97f682ca7c7a..512b27a0536e 100644
> > --- a/drivers/pci/controller/pcie-mobiveil.c
> > +++ b/drivers/pci/controller/pcie-mobiveil.c
> > @@ -454,12 +454,6 @@ static int mobiveil_pcie_parse_dt(struct
> mobiveil_pcie *pcie)
> > return PTR_ERR(pcie->csr_axi_slave_base);
> > pcie->pcie_reg_base = res->start;
> >
> > - /* map MSI config resource */
> > - res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> "apb_csr");
> > - pcie->apb_csr_base = devm_pci_remap_cfg_resource(dev, res);
> > - if (IS_ERR(pcie->apb_csr_base))
> > - return PTR_ERR(pcie->apb_csr_base);
> > -
> > /* read the number of windows requested */
> > if (of_property_read_u32(node, "apio-wins", &pcie->apio_wins))
> > pcie->apio_wins = MAX_PIO_WINDOWS;
> > @@ -467,12 +461,6 @@ static int mobiveil_pcie_parse_dt(struct
> mobiveil_pcie *pcie)
> > if (of_property_read_u32(node, "ppio-wins", &pcie->ppio_wins))
> > pcie->ppio_wins = MAX_PIO_WINDOWS;
> >
> > - rp->irq = platform_get_irq(pdev, 0);
> > - if (rp->irq <= 0) {
> > - dev_err(dev, "failed to map IRQ: %d\n", rp->irq);
> > - return -ENODEV;
> > - }
> > -
> > return 0;
> > }
> >
> > @@ -618,9 +606,6 @@ static int mobiveil_host_init(struct mobiveil_pcie
> *pcie)
> > pab_ctrl |= (1 << AMBA_PIO_ENABLE_SHIFT) | (1 <<
> PEX_PIO_ENABLE_SHIFT);
> > mobiveil_csr_writel(pcie, pab_ctrl, PAB_CTRL);
> >
> > - mobiveil_csr_writel(pcie, (PAB_INTP_INTX_MASK |
> PAB_INTP_MSI_MASK),
> > - PAB_INTP_AMBA_MISC_ENB);
> > -
> > /*
> > * program PIO Enable Bit to 1 and Config Window Enable Bit to 1 in
> > * PAB_AXI_PIO_CTRL Register
> > @@ -670,9 +655,6 @@ static int mobiveil_host_init(struct mobiveil_pcie
> *pcie)
> > value |= (PCI_CLASS_BRIDGE_PCI << 16);
> > mobiveil_csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS);
> >
> > - /* setup MSI hardware registers */
> > - mobiveil_pcie_enable_msi(pcie);
> > -
> > return 0;
> > }
> >
> > @@ -873,6 +855,46 @@ static int mobiveil_pcie_init_irq_domain(struct
> mobiveil_pcie *pcie)
> > return 0;
> > }
> >
> > +static int mobiveil_pcie_interrupt_init(struct mobiveil_pcie *pcie) {
> > + struct platform_device *pdev = pcie->pdev;
> > + struct device *dev = &pdev->dev;
> > + struct root_port *rp = &pcie->rp;
> > + struct resource *res;
> > + int ret;
> > +
> > + /* map MSI config resource */
> > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> "apb_csr");
> > + pcie->apb_csr_base = devm_pci_remap_cfg_resource(dev, res);
> > + if (IS_ERR(pcie->apb_csr_base))
> > + return PTR_ERR(pcie->apb_csr_base);
> > +
> > + /* setup MSI hardware registers */
> > + mobiveil_pcie_enable_msi(pcie);
>
> Does this need to come after mobiveil_pcie_init_irq_domain - given that this
> function sets up the irq domain for MSI?
No, I don't think so, because I didn't change the relative order of the 2 functions
you mentioned.
Thanks,
Zhiqiang
>
> Thanks,
>
> Andrew Murray
>
> > +
> > + rp->irq = platform_get_irq(pdev, 0);
> > + if (rp->irq <= 0) {
> > + dev_err(dev, "failed to map IRQ: %d\n", rp->irq);
> > + return -ENODEV;
> > + }
> > +
> > + /* initialize the IRQ domains */
> > + ret = mobiveil_pcie_init_irq_domain(pcie);
> > + if (ret) {
> > + dev_err(dev, "Failed creating IRQ Domain\n");
> > + return ret;
> > + }
> > +
> > + irq_set_chained_handler_and_data(rp->irq, mobiveil_pcie_isr, pcie);
> > +
> > + /* Enable interrupts */
> > + mobiveil_csr_writel(pcie, (PAB_INTP_INTX_MASK |
> PAB_INTP_MSI_MASK),
> > + PAB_INTP_AMBA_MISC_ENB);
> > +
> > +
> > + return 0;
> > +}
> > +
> > int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie) {
> > struct root_port *rp = &pcie->rp;
> > @@ -906,15 +928,12 @@ int mobiveil_pcie_host_probe(struct
> mobiveil_pcie *pcie)
> > return ret;
> > }
> >
> > - /* initialize the IRQ domains */
> > - ret = mobiveil_pcie_init_irq_domain(pcie);
> > + ret = mobiveil_pcie_interrupt_init(pcie);
> > if (ret) {
> > - dev_err(dev, "Failed creating IRQ Domain\n");
> > + dev_err(dev, "Interrupt init failed\n");
> > return ret;
> > }
> >
> > - irq_set_chained_handler_and_data(rp->irq, mobiveil_pcie_isr, pcie);
> > -
> > /* Initialize bridge */
> > bridge->dev.parent = dev;
> > bridge->sysdata = pcie;
> > --
> > 2.17.1
> >
Powered by blists - more mailing lists