[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+E=qVf1wVLgJ3_4K3nbZtgkRUVfmfgArwssPXu2Qb0NHAB+GA@mail.gmail.com>
Date: Thu, 6 Feb 2020 16:49:01 -0800
From: Vasily Khoruzhick <anarsoul@...il.com>
To: Amit Kucheria <amit.kucheria@...durent.com>
Cc: Yangtao Li <tiny.windzz@...il.com>,
Zhang Rui <rui.zhang@...el.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Ripard <mripard@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Linux PM list <linux-pm@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
lakml <linux-arm-kernel@...ts.infradead.org>,
Ondřej Jirman <megous@...ous.com>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v8 0/7] add thermal sensor driver for A64, A83T, H3, H5,
H6, R40
On Thu, Feb 6, 2020 at 6:14 AM Amit Kucheria
<amit.kucheria@...durent.com> wrote:
>
> Hi Vasily,
>
> For this entire series, the DTS files don't contain any trip points.
> Did I miss some other series?
See https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/?h=sunxi/dt-for-5.6&id=e1c3804a177418fe14d95f0c4ccba5ae66f73d82
for A64
> At a minimum, you should add some "hot" or "critical" trip points
> since then don't require a cooling-map with throttling actions. If you
> have "passive" trip points, then you need to provide cooling-maps.
>
> Since this series has been merged, could you please follow up with a
> fixup series to add the trip points?
A64 has already made it into linux-next, I believe there's other
series in flight at least for H6 from Yangtao Li and for H5 from
Chen-Yu Tsai
> Regards,
> Amit
> p.s. We should catch all this automatically, I'll send out yaml
> bindings for the thermal framework soon that should catch this stuff.
>
> On Thu, Dec 19, 2019 at 10:58 PM Vasily Khoruzhick <anarsoul@...il.com> wrote:
> >
> > This patchset adds driver for thermal sensor in A64, A83T, H3, H5,
> > H6 and R40 SoCs.
> >
> > v8:
> > - [vasily] Address more Maxime's comments for dt-schema
> > - [vasily] Add myself to MAINTAINERS for the driver and schema
> > - [vasily] Round calibration data size to word boundary for H6 and A64
> > - [vasily] Change offset for A64 since it reports too low temp otherwise.
> > Likely conversion formula in user manual is not correct.
> >
> > v7:
> > - [vasily] Address Maxime's comments for dt-schema
> > - [vasily] Move common part of H3 and H5 dts into sunxi-h3-h5.dtsi
> > - [vasily] Add Maxime's a-b to the driver patch
> >
> > v6:
> > - [ondrej, vasily] Squash all driver related changes into a
> > single patch
> > - [ondrej] Rename calib -> calibration
> > - [ondrej] Fix thermal zone registration check
> > - [ondrej] Lower rate of sensor data interrupts to 4/sec/sensor
> > - [ondrej] Rework scale/offset values, H6 calibration
> > - [ondrej] Explicitly set mod clock to 24 MHz
> > - [ondrej] Set undocumented bits in CTRL0 for H6
> > - [ondrej] Add support for A83T
> > - [ondrej] Add dts changes for A83T, H3, H5, H6
> > - [vasily] Add dts changes for A64
> > - [vasily] Address Maxime's comments for YAML scheme
> > - [vasily] Make .calc_temp callback mandatory
> > - [vasily] Set .max_register in regmap config, so regs can be
> > inspected using debugfs
> >
> > Ondrej Jirman (4):
> > ARM: dts: sun8i-a83t: Add thermal sensor and thermal zones
> > ARM: dts: sun8i-h3: Add thermal sensor and thermal zones
> > arm64: dts: allwinner: h5: Add thermal sensor and thermal zones
> > arm64: dts: allwinner: h6: Add thermal sensor and thermal zones
> >
> > Vasily Khoruzhick (1):
> > arm64: dts: allwinner: a64: Add thermal sensors and thermal zones
> >
> > Yangtao Li (2):
> > thermal: sun8i: add thermal driver for H6/H5/H3/A64/A83T/R40
> > dt-bindings: thermal: add YAML schema for sun8i-thermal driver
> > bindings
> >
> > .../thermal/allwinner,sun8i-a83t-ths.yaml | 160 +++++
> > MAINTAINERS | 8 +
> > arch/arm/boot/dts/sun8i-a83t.dtsi | 36 +
> > arch/arm/boot/dts/sun8i-h3.dtsi | 20 +
> > arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 +
> > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 42 ++
> > arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 26 +
> > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 +
> > drivers/thermal/Kconfig | 14 +
> > drivers/thermal/Makefile | 1 +
> > drivers/thermal/sun8i_thermal.c | 639 ++++++++++++++++++
> > 11 files changed, 985 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
> > create mode 100644 drivers/thermal/sun8i_thermal.c
> >
> > --
> > 2.24.1
> >
Powered by blists - more mailing lists