linux-kernel - [PATCH 3.16 117/148] drm/radeon: fix bad DMA from INTERRUPT

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <lsq.1581185941.841230449@decadent.org.uk>
Date:   Sat, 08 Feb 2020 18:20:56 +0000
From:   Ben Hutchings <ben@...adent.org.uk>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
CC:     akpm@...ux-foundation.org, Denis Kirjanov <kda@...ux-powerpc.org>,
        "Alex Deucher" <alexander.deucher@....com>,
        "Sam Bobroff" <sbobroff@...ux.ibm.com>
Subject: [PATCH 3.16 117/148] drm/radeon: fix bad DMA from INTERRUPT_CNTL2

3.16.82-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Sam Bobroff <sbobroff@...ux.ibm.com>

commit 62d91dd2851e8ae2ca552f1b090a3575a4edf759 upstream.

The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address.  This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).

Instead, use the DMA address of the dummy page because it will always
be safe.

Fixes: d8f60cfc9345 ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)")
Fixes: 25a857fbe973 ("drm/radeon/kms: add support for interrupts on SI")
Fixes: a59781bbe528 ("drm/radeon: add support for interrupts on CIK (v5)")
Signed-off-by: Sam Bobroff <sbobroff@...ux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@....com>
Signed-off-by: Ben Hutchings <ben@...adent.org.uk>
---
 drivers/gpu/drm/radeon/cik.c  | 4 ++--
 drivers/gpu/drm/radeon/r600.c | 4 ++--
 drivers/gpu/drm/radeon/si.c   | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -6875,8 +6875,8 @@ static int cik_irq_init(struct radeon_de
 	}
 
 	/* setup interrupt control */
-	/* XXX this should actually be a bus address, not an MC address. same on older asics */
-	WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+	/* set dummy read address to dummy page address */
+	WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
 	interrupt_cntl = RREG32(INTERRUPT_CNTL);
 	/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
 	 * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -3427,8 +3427,8 @@ int r600_irq_init(struct radeon_device *
 	}
 
 	/* setup interrupt control */
-	/* set dummy read address to ring address */
-	WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+	/* set dummy read address to dummy page address */
+	WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
 	interrupt_cntl = RREG32(INTERRUPT_CNTL);
 	/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
 	 * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -5749,8 +5749,8 @@ static int si_irq_init(struct radeon_dev
 	}
 
 	/* setup interrupt control */
-	/* set dummy read address to ring address */
-	WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+	/* set dummy read address to dummy page address */
+	WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
 	interrupt_cntl = RREG32(INTERRUPT_CNTL);
 	/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
 	 * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN