Message-Id: <20200209212609.7928-20-jarkko.sakkinen@linux.intel.com>
Date:   Sun,  9 Feb 2020 23:26:06 +0200
From:   Jarkko Sakkinen <jarkko.sakkinen@...ux.intel.com>
To:     linux-kernel@...r.kernel.org, x86@...nel.org,
        linux-sgx@...r.kernel.org
Cc:     akpm@...ux-foundation.org, dave.hansen@...el.com,
        sean.j.christopherson@...el.com, nhorman@...hat.com,
        npmccallum@...hat.com, haitao.huang@...el.com,
        andriy.shevchenko@...ux.intel.com, tglx@...utronix.de,
        kai.svahn@...el.com, bp@...en8.de, josh@...htriplett.org,
        luto@...nel.org, kai.huang@...el.com, rientjes@...gle.com,
        cedric.xing@...el.com, puiterwijk@...hat.com,
        Andy Lutomirski <luto@...capital.net>,
        Jarkko Sakkinen <jarkko.sakkinen@...ux.intel.com>
Subject: [PATCH v26 19/22] x86/vdso: Add __vdso_sgx_enter_enclave() to wrap SGX enclave transitions

From: Sean Christopherson <sean.j.christopherson@...el.com>

Intel Software Guard Extensions (SGX) introduces a new CPL3-only enclave
mode that runs as a sort of black box shared object that is hosted by an
untrusted normal CPL3 process.

Skipping over a great deal of gory architecture details[1], SGX was
designed in such a way that the host process can utilize a library to
build, launch and run an enclave.  This is roughly analogous to how
e.g. libc implementations are used by most applications so that the
application can focus on its business logic.

The big gotcha is that because enclaves can generate *and* handle
exceptions, any SGX library must be prepared to handle nearly any
exception at any time (well, any time a thread is executing in an
enclave).  In Linux, this means the SGX library must register a
signal handler in order to intercept relevant exceptions and forward
them to the enclave (or in some cases, take action on behalf of the
enclave).  Unfortunately, Linux's signal mechanism doesn't mesh well
with libraries, e.g. signal handlers are process wide, are difficult
to chain, etc...  This becomes particularly nasty when using multiple
levels of libraries that register signal handlers, e.g. running an
enclave via cgo inside of the Go runtime.

In comes vDSO to save the day.  Now that vDSO can fixup exceptions,
add a function, __vdso_sgx_enter_enclave(), to wrap enclave transitions
and intercept any exceptions that occur when running the enclave.

__vdso_sgx_enter_enclave() does NOT adhere to the x86-64 ABI and instead
uses a custom calling convention.  The primary motivation is to avoid
issues that arise due to asynchronous enclave exits.  The x86-64 ABI
requires that EFLAGS.DF, MXCSR and FCW be preserved by the callee, and
unfortunately for the vDSO, the aformentioned registers/bits are not
restored after an asynchronous exit, e.g. EFLAGS.DF is in an unknown
state while MXCSR and FCW are reset to their init values.  So the vDSO
cannot simply pass the buck by requiring enclaves to adhere to the
x86-64 ABI.  That leaves three somewhat reasonable options:

  1) Save/restore non-volatile GPRs, MXCSR and FCW, and clear EFLAGS.DF

     + 100% compliant with the x86-64 ABI
     + Callable from any code
     + Minimal documentation required
     - Restoring MXCSR/FCW is likely unnecessary 99% of the time
     - Slow

  2) Save/restore non-volatile GPRs and clear EFLAGS.DF

     + Mostly compliant with the x86-64 ABI
     + Callable from any code that doesn't use SIMD registers
     - Need to document deviations from x86-64 ABI, i.e. MXCSR and FCW

  3) Require the caller to save/restore everything.

     + Fast
     + Userspace can pass all GPRs to the enclave (minus EAX, RBX and RCX)
     - Custom ABI
     - For all intents and purposes must be called from an assembly wrapper

__vdso_sgx_enter_enclave() implements option (3).  The custom ABI is
mostly a documentation issue, and even that is offset by the fact that
being more similar to hardware's ENCLU[EENTER/ERESUME] ABI reduces the
amount of documentation needed for the vDSO, e.g. options (2) and (3)
would need to document which registers are marshalled to/from enclaves.
Requiring an assembly wrapper imparts minimal pain on userspace as SGX
libraries and/or applications need a healthy chunk of assembly, e.g. in
the enclave, regardless of the vDSO's implementation.

Note, the C-like pseudocode describing the assembly routine is wrapped
in a non-existent macro instead of in a comment to trick kernel-doc into
auto-parsing the documentation and function prototype.  This is a double
win as the pseudocode is intended to aid kernel developers, not userland
enclave developers.

[1] Documentation/x86/sgx/1.Architecture.rst

Suggested-by: Andy Lutomirski <luto@...capital.net>
Signed-off-by: Sean Christopherson <sean.j.christopherson@...el.com>
Co-developed-by: Cedric Xing <cedric.xing@...el.com>
Signed-off-by: Cedric Xing <cedric.xing@...el.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@...ux.intel.com>
---
 arch/x86/entry/vdso/Makefile             |   2 +
 arch/x86/entry/vdso/vdso.lds.S           |   1 +
 arch/x86/entry/vdso/vsgx_enter_enclave.S | 187 +++++++++++++++++++++++
 arch/x86/include/uapi/asm/sgx.h          |  37 +++++
 4 files changed, 227 insertions(+)
 create mode 100644 arch/x86/entry/vdso/vsgx_enter_enclave.S

diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile
index 629053b77e4a..d1d609d1626e 100644
--- a/arch/x86/entry/vdso/Makefile
+++ b/arch/x86/entry/vdso/Makefile
@@ -24,6 +24,7 @@ VDSO32-$(CONFIG_IA32_EMULATION)	:= y
 
 # files to link into the vdso
 vobjs-y := vdso-note.o vclock_gettime.o vgetcpu.o
+vobjs-$(VDSO64-y)		+= vsgx_enter_enclave.o
 
 # files to link into kernel
 obj-y				+= vma.o extable.o
@@ -90,6 +91,7 @@ $(vobjs): KBUILD_CFLAGS := $(filter-out $(GCC_PLUGINS_CFLAGS) $(RETPOLINE_CFLAGS
 CFLAGS_REMOVE_vclock_gettime.o = -pg
 CFLAGS_REMOVE_vdso32/vclock_gettime.o = -pg
 CFLAGS_REMOVE_vgetcpu.o = -pg
+CFLAGS_REMOVE_vsgx_enter_enclave.o = -pg
 
 #
 # X32 processes use x32 vDSO to access 64bit kernel data.
diff --git a/arch/x86/entry/vdso/vdso.lds.S b/arch/x86/entry/vdso/vdso.lds.S
index 36b644e16272..4bf48462fca7 100644
--- a/arch/x86/entry/vdso/vdso.lds.S
+++ b/arch/x86/entry/vdso/vdso.lds.S
@@ -27,6 +27,7 @@ VERSION {
 		__vdso_time;
 		clock_getres;
 		__vdso_clock_getres;
+		__vdso_sgx_enter_enclave;
 	local: *;
 	};
 }
diff --git a/arch/x86/entry/vdso/vsgx_enter_enclave.S b/arch/x86/entry/vdso/vsgx_enter_enclave.S
new file mode 100644
index 000000000000..94a8e5f99961
--- /dev/null
+++ b/arch/x86/entry/vdso/vsgx_enter_enclave.S
@@ -0,0 +1,187 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <linux/linkage.h>
+#include <asm/export.h>
+#include <asm/errno.h>
+
+#include "extable.h"
+
+#define EX_LEAF		0*8
+#define EX_TRAPNR	0*8+4
+#define EX_ERROR_CODE	0*8+6
+#define EX_ADDRESS	1*8
+
+.code64
+.section .text, "ax"
+
+/**
+ * __vdso_sgx_enter_enclave() - Enter an SGX enclave
+ * @leaf:	ENCLU leaf, must be EENTER or ERESUME
+ * @tcs:	TCS, must be non-NULL
+ * @e:		Optional struct sgx_enclave_exception instance
+ * @handler:	Optional enclave exit handler
+ *
+ * **Important!**  __vdso_sgx_enter_enclave() is **NOT** compliant with the
+ * x86-64 ABI, i.e. cannot be called from standard C code.
+ *
+ * Input ABI:
+ *  @leaf	%eax
+ *  @tcs	8(%rsp)
+ *  @e 		0x10(%rsp)
+ *  @handler	0x18(%rsp)
+ *
+ * Output ABI:
+ *  @ret	%eax
+ *
+ * All general purpose registers except RAX, RBX and RCX are passed as-is to
+ * the enclave. RAX, RBX and RCX are consumed by EENTER and ERESUME and are
+ * loaded with @leaf, asynchronous exit pointer, and @tcs respectively.
+ *
+ * RBP and the stack are used to anchor __vdso_sgx_enter_enclave() to the
+ * pre-enclave state, e.g. to retrieve @e and @handler after an enclave exit.
+ * All other registers are available for use by the enclave and its runtime,
+ * e.g. an enclave can push additional data onto the stack (and modify RSP) to
+ * pass information to the optional exit handler (see below).
+ *
+ * Most exceptions reported on ENCLU, including those that occur within the
+ * enclave, are fixed up and reported synchronously instead of being delivered
+ * via a standard signal. Debug Exceptions (#DB) and Breakpoints (#BP) are
+ * never fixed up and are always delivered via standard signals. On synchrously
+ * reported exceptions, -EFAULT is returned and details about the exception are
+ * recorded in @e, the optional sgx_enclave_exception struct.
+
+ * If an exit handler is provided, the handler will be invoked on synchronous
+ * exits from the enclave and for all synchronously reported exceptions. In
+ * latter case, @e is filled prior to invoking the handler.
+ *
+ * The exit handler's return value is interpreted as follows:
+ *  >0:		continue, restart __vdso_sgx_enter_enclave() with @ret as @leaf
+ *   0:		success, return @ret to the caller
+ *  <0:		error, return @ret to the caller
+ *
+ * The userspace exit handler is responsible for unwinding the stack, e.g. to
+ * pop @e, u_rsp and @tcs, prior to returning to __vdso_sgx_enter_enclave().
+ * The exit handler may also transfer control, e.g. via longjmp() or a C++
+ * exception, without returning to __vdso_sgx_enter_enclave().
+ *
+ * Return:
+ *  0 on success,
+ *  -EINVAL if ENCLU leaf is not allowed,
+ *  -EFAULT if an exception occurs on ENCLU or within the enclave
+ *  -errno for all other negative values returned by the userspace exit handler
+ */
+#ifdef SGX_KERNEL_DOC
+/* C-style function prototype to coerce kernel-doc into parsing the comment. */
+int __vdso_sgx_enter_enclave(int leaf, void *tcs,
+			     struct sgx_enclave_exception *e,
+			     sgx_enclave_exit_handler_t handler);
+#endif
+SYM_FUNC_START(__vdso_sgx_enter_enclave)
+	/* Prolog */
+	.cfi_startproc
+	push	%rbp
+	.cfi_adjust_cfa_offset	8
+	.cfi_rel_offset		%rbp, 0
+	mov	%rsp, %rbp
+	.cfi_def_cfa_register	%rbp
+
+.Lenter_enclave:
+	/* EENTER <= leaf <= ERESUME */
+	cmp	$0x2, %eax
+	jb	.Linvalid_leaf
+	cmp	$0x3, %eax
+	ja	.Linvalid_leaf
+
+	/* Load TCS and AEP */
+	mov	0x10(%rbp), %rbx
+	lea	.Lasync_exit_pointer(%rip), %rcx
+
+	/* Single ENCLU serving as both EENTER and AEP (ERESUME) */
+.Lasync_exit_pointer:
+.Lenclu_eenter_eresume:
+	enclu
+
+	/* EEXIT jumps here unless the enclave is doing something fancy. */
+	xor	%eax, %eax
+
+	/* Invoke userspace's exit handler if one was provided. */
+.Lhandle_exit:
+	cmp	$0, 0x20(%rbp)
+	jne	.Linvoke_userspace_handler
+
+.Lout:
+	leave
+	.cfi_def_cfa		%rsp, 8
+	ret
+
+	/* The out-of-line code runs with the pre-leave stack frame. */
+	.cfi_def_cfa		%rbp, 16
+
+.Linvalid_leaf:
+	mov	$(-EINVAL), %eax
+	jmp	.Lout
+
+.Lhandle_exception:
+	mov	0x18(%rbp), %rcx
+	test    %rcx, %rcx
+	je	.Lskip_exception_info
+
+	/* Fill optional exception info. */
+	mov	%eax, EX_LEAF(%rcx)
+	mov	%di,  EX_TRAPNR(%rcx)
+	mov	%si,  EX_ERROR_CODE(%rcx)
+	mov	%rdx, EX_ADDRESS(%rcx)
+.Lskip_exception_info:
+	mov	$(-EFAULT), %eax
+	jmp	.Lhandle_exit
+
+.Linvoke_userspace_handler:
+	/* Pass the untrusted RSP (at exit) to the callback via %rcx. */
+	mov	%rsp, %rcx
+
+	/* Save the untrusted RSP in %rbx (non-volatile register). */
+	mov	%rsp, %rbx
+
+	/*
+	 * Align stack per x86_64 ABI. Note, %rsp needs to be 16-byte aligned
+	 * _after_ pushing the parameters on the stack, hence the bonus push.
+	 */
+	and	$-0x10, %rsp
+	push	%rax
+
+	/* Push @e, the "return" value and @tcs as params to the callback. */
+	push	0x18(%rbp)
+	push	%rax
+	push	0x10(%rbp)
+
+	/* Clear RFLAGS.DF per x86_64 ABI */
+	cld
+
+	/* Load the callback pointer to %rax and invoke it via retpoline. */
+	mov	0x20(%rbp), %rax
+	call	.Lretpoline
+
+	/* Restore %rsp to its post-exit value. */
+	mov	%rbx, %rsp
+
+	/*
+	 * If the return from callback is zero or negative, return immediately,
+	 * else re-execute ENCLU with the postive return value interpreted as
+	 * the requested ENCLU leaf.
+	 */
+	cmp	$0, %eax
+	jle	.Lout
+	jmp	.Lenter_enclave
+
+.Lretpoline:
+	call	2f
+1:	pause
+	lfence
+	jmp	1b
+2:	mov	%rax, (%rsp)
+	ret
+	.cfi_endproc
+
+_ASM_VDSO_EXTABLE_HANDLE(.Lenclu_eenter_eresume, .Lhandle_exception)
+
+SYM_FUNC_END(__vdso_sgx_enter_enclave)
diff --git a/arch/x86/include/uapi/asm/sgx.h b/arch/x86/include/uapi/asm/sgx.h
index 57d0d30c79b3..e196cfd44b70 100644
--- a/arch/x86/include/uapi/asm/sgx.h
+++ b/arch/x86/include/uapi/asm/sgx.h
@@ -74,4 +74,41 @@ struct sgx_enclave_set_attribute {
 	__u64 attribute_fd;
 };
 
+/**
+ * struct sgx_enclave_exception - structure to report exceptions encountered in
+ *				  __vdso_sgx_enter_enclave()
+ *
+ * @leaf:	ENCLU leaf from \%eax at time of exception
+ * @trapnr:	exception trap number, a.k.a. fault vector
+ * @error_code:	exception error code
+ * @address:	exception address, e.g. CR2 on a #PF
+ * @reserved:	reserved for future use
+ */
+struct sgx_enclave_exception {
+	__u32 leaf;
+	__u16 trapnr;
+	__u16 error_code;
+	__u64 address;
+	__u64 reserved[2];
+};
+
+/**
+ * typedef sgx_enclave_exit_handler_t - Exit handler function accepted by
+ *					__vdso_sgx_enter_enclave()
+ *
+ * @rdi:	RDI at the time of enclave exit
+ * @rsi:	RSI at the time of enclave exit
+ * @rdx:	RDX at the time of enclave exit
+ * @ursp:	RSP at the time of enclave exit (untrusted stack)
+ * @r8:		R8 at the time of enclave exit
+ * @r9:		R9 at the time of enclave exit
+ * @tcs:	Thread Control Structure used to enter enclave
+ * @ret:	0 on success (EEXIT), -EFAULT on an exception
+ * @e:		Pointer to struct sgx_enclave_exception (as provided by caller)
+ */
+typedef int (*sgx_enclave_exit_handler_t)(long rdi, long rsi, long rdx,
+					  long ursp, long r8, long r9,
+					  void *tcs, int ret,
+					  struct sgx_enclave_exception *e);
+
 #endif /* _UAPI_ASM_X86_SGX_H */
-- 
2.20.1

Powered by blists - more mailing lists