linux-kernel - Re: [PATCH] serial: sh-sci: Support custom speed setting

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200210214451.GA6104@lxhi-065.adit-jv.com>
Date:   Mon, 10 Feb 2020 22:44:51 +0100
From:   Eugeniu Rosca <erosca@...adit-jv.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Geert Uytterhoeven <geert@...ux-m68k.org>
CC:     "open list:SERIAL DRIVERS" <linux-serial@...r.kernel.org>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
        Wolfram Sang <wsa+renesas@...g-engineering.com>,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
        Ulrich Hecht <uli+renesas@...nd.eu>,
        "George G . Davis" <george_davis@...tor.com>,
        Andrew Gabbasov <andrew_gabbasov@...tor.com>,
        Jiada Wang <jiada_wang@...tor.com>,
        Yuichi Kusakabe <yuichi.kusakabe@...so-ten.com>,
        Yasushi Asano <yasano@...adit-jv.com>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Jiri Slaby <jslaby@...e.com>,
        Fukui Yohhei <yohhei.fukui@...so-ten.com>,
        Torii Kenichi <torii.ken1@...fujitsu.com>,
        Magnus Damm <magnus.damm@...il.com>,
        Eugeniu Rosca <roscaeugeniu@...il.com>,
        Eugeniu Rosca <erosca@...adit-jv.com>
Subject: Re: [PATCH] serial: sh-sci: Support custom speed setting

Dear Geert and Greg,

On Mon, Feb 10, 2020 at 12:57:35PM -0800, Greg Kroah-Hartman wrote:
> On Thu, Jan 30, 2020 at 01:32:50PM +0100, Geert Uytterhoeven wrote:
> > Hi Eugeniu,
> > 
> > On Wed, Jan 29, 2020 at 5:20 PM Eugeniu Rosca <erosca@...adit-jv.com> wrote:
> > > From: Torii Kenichi <torii.ken1@...fujitsu.com>
> > >
> > > This patch is necessary to use BT module and XM module with DENSO TEN
> > > development board.
> > >
> > > This patch supports ASYNC_SPD_CUST flag by ioctl(TIOCSSERIAL), enables
> > > custom speed setting with setserial(1).
> > >
> > > The custom speed is calculated from uartclk and custom_divisor.
> > > If custom_divisor is zero, custom speed setting is invalid.
> > >
> > > Signed-off-by: Torii Kenichi <torii.ken1@...fujitsu.com>
> > > [erosca: rebase against v5.5]
> > > Signed-off-by: Eugeniu Rosca <erosca@...adit-jv.com>
> > 
> > Thanks for your patch!
> > 
> > While this seems to work fine[*], I have a few comments/questions:
> >   1. This feature seems to be deprecated:
> > 
> >          sh-sci e6e68000.serial: setserial sets custom speed on
> > ttySC1. This is deprecated.
> > 
> >   2. As the wanted speed is specified as a divider, the resulting speed
> >      may be off, cfr. the example for 57600 below.
> >      Note that the SCIF device has multiple clock inputs, and can do
> >      57600 perfectly if the right crystal has been fitted.
> > 
> >  3. What to do with "[PATCH/RFC] serial: sh-sci: Update uartclk based
> >      on selected clock" (https://patchwork.kernel.org/patch/11103703/)?
> >      Combined with this, things become pretty complicated and
> >      unpredictable, as uartclk now always reflect the frequency of the
> >      last used base clock, which was the optimal one for the previously
> >      used speed....
> > 
> > I think it would be easier if we just had an API to specify a raw speed.
> > Perhaps that already exists?
> 
> Yes, see:
> 	http://www.panix.com/~grante/arbitrary-baud.c

This looks like a compelling piece of evidence users should stay away
from implementing and using the kludge (38400 baud) mechanism?

Unless the author and the users of this patch (CC-ed in this thread)
have a different opinion, I consider this topic closed. Thanks!

-- 
Best Regards
Eugeniu Rosca