lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-Id: <1581392451-28743-3-git-send-email-cang@codeaurora.org>
Date:   Mon, 10 Feb 2020 19:40:45 -0800
From:   Can Guo <cang@...eaurora.org>
To:     asutoshd@...eaurora.org, nguyenb@...eaurora.org,
        hongwus@...eaurora.org, rnayak@...eaurora.org,
        linux-scsi@...r.kernel.org, kernel-team@...roid.com,
        saravanak@...gle.com, salyzyn@...gle.com, cang@...eaurora.org
Cc:     Alim Akhtar <alim.akhtar@...sung.com>,
        Avri Altman <avri.altman@....com>,
        "James E.J. Bottomley" <jejb@...ux.ibm.com>,
        "Martin K. Petersen" <martin.petersen@...cle.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Stanley Chu <stanley.chu@...iatek.com>,
        Bean Huo <beanhuo@...ron.com>,
        Bart Van Assche <bvanassche@....org>,
        Venkat Gopalakrishnan <venkatg@...eaurora.org>,
        Tomas Winkler <tomas.winkler@...el.com>,
        linux-kernel@...r.kernel.org (open list),
        linux-arm-kernel@...ts.infradead.org (moderated list:ARM/Mediatek SoC
        support),
        linux-mediatek@...ts.infradead.org (moderated list:ARM/Mediatek SoC
        support)
Subject: [PATCH v10 2/7] scsi: ufs: set load before setting voltage in regulators

From: Asutosh Das <asutoshd@...eaurora.org>

This sequence change is required to avoid dips in voltage
during boot-up.

Apparently, this dip is caused because in the original
sequence, the regulators are initialized in lpm mode.
And then when the load is set to high, and more current
is drawn, than is allowed in lpm, the dip is seen.

Signed-off-by: Asutosh Das <asutoshd@...eaurora.org>
Signed-off-by: Can Guo <cang@...eaurora.org>
Reviewed-by: Hongwu Su <hongwus@...eaurora.org>
Reviewed-by: Bean Huo <beanhuo@...ron.com>
Reviewed-by: Stanley Chu <stanley.chu@...iatek.com>
---
 drivers/scsi/ufs/ufshcd.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 10dbc0c..83ae093 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -7248,6 +7248,11 @@ static int ufshcd_config_vreg(struct device *dev,
 	name = vreg->name;
 
 	if (regulator_count_voltages(reg) > 0) {
+		uA_load = on ? vreg->max_uA : 0;
+		ret = ufshcd_config_vreg_load(dev, vreg, uA_load);
+		if (ret)
+			goto out;
+
 		if (vreg->min_uV && vreg->max_uV) {
 			min_uV = on ? vreg->min_uV : 0;
 			ret = regulator_set_voltage(reg, min_uV, vreg->max_uV);
@@ -7258,11 +7263,6 @@ static int ufshcd_config_vreg(struct device *dev,
 				goto out;
 			}
 		}
-
-		uA_load = on ? vreg->max_uA : 0;
-		ret = ufshcd_config_vreg_load(dev, vreg, uA_load);
-		if (ret)
-			goto out;
 	}
 out:
 	return ret;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ