| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 11 Feb 2020 15:51:22 +0000
From: Mark Brown <broonie@...nel.org>
To: Saravanan Sekar <sravanhome@...il.com>
Cc: broonie@...nel.org, davem@...emloft.net,
devicetree@...r.kernel.org, gregkh@...uxfoundation.org,
Jonathan.Cameron@...wei.com, lgirdwood@...il.com,
linux-kernel@...r.kernel.org, Mark Brown <broonie@...nel.org>,
mark.rutland@....com, mchehab+samsung@...nel.org,
robh+dt@...nel.org, sravanhome@...il.com
Subject: Applied "regulator: mp5416: add mp5416 regulator driver" to the regulator tree
The patch
regulator: mp5416: add mp5416 regulator driver
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.7
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From a273188b87fd7afc9b1a0f814452ecfb4e764f62 Mon Sep 17 00:00:00 2001
From: Saravanan Sekar <sravanhome@...il.com>
Date: Tue, 4 Feb 2020 12:04:18 +0100
Subject: [PATCH] regulator: mp5416: add mp5416 regulator driver
Adding regulator driver for the device mp5416.
The MP5416 PMIC device contains four DC-DC buck converters and
five regulators, accessed over I2C.
Signed-off-by: Saravanan Sekar <sravanhome@...il.com>
Link: https://lore.kernel.org/r/20200204110419.25933-3-sravanhome@gmail.com
Signed-off-by: Mark Brown <broonie@...nel.org>
---
drivers/regulator/Kconfig | 10 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/mp5416.c | 245 +++++++++++++++++++++++++++++++++++++
3 files changed, 256 insertions(+)
create mode 100644 drivers/regulator/mp5416.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 074a2ef55943..b8ae513514a8 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -613,6 +613,16 @@ config REGULATOR_MCP16502
through the regulator interface. In addition it enables
suspend-to-ram/standby transition.
+config REGULATOR_MP5416
+ tristate "Monolithic MP5416 PMIC"
+ depends on I2C && OF
+ select REGMAP_I2C
+ help
+ Say y here to support the MP5416 PMIC. This will enable supports
+ the software controllable 4 buck and 4 LDO regulators.
+ Say M here if you want to include support for the regulator as a
+ module.
+
config REGULATOR_MP8859
tristate "MPS MP8859 regulator driver"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index c0d6b96ebd78..bc69d6481646 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -78,6 +78,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o
+obj-$(CONFIG_REGULATOR_MP5416) += mp5416.o
obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o
obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
diff --git a/drivers/regulator/mp5416.c b/drivers/regulator/mp5416.c
new file mode 100644
index 000000000000..7954ad17249b
--- /dev/null
+++ b/drivers/regulator/mp5416.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// mp5416.c - regulator driver for mps mp5416
+//
+// Copyright 2020 Monolithic Power Systems, Inc
+//
+// Author: Saravanan Sekar <sravanhome@...il.com>
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/i2c.h>
+
+#define MP5416_REG_CTL0 0x00
+#define MP5416_REG_CTL1 0x01
+#define MP5416_REG_CTL2 0x02
+#define MP5416_REG_ILIM 0x03
+#define MP5416_REG_BUCK1 0x04
+#define MP5416_REG_BUCK2 0x05
+#define MP5416_REG_BUCK3 0x06
+#define MP5416_REG_BUCK4 0x07
+#define MP5416_REG_LDO1 0x08
+#define MP5416_REG_LDO2 0x09
+#define MP5416_REG_LDO3 0x0a
+#define MP5416_REG_LDO4 0x0b
+
+#define MP5416_REGULATOR_EN BIT(7)
+#define MP5416_MASK_VSET 0x7f
+#define MP5416_MASK_BUCK1_ILIM 0xc0
+#define MP5416_MASK_BUCK2_ILIM 0x0c
+#define MP5416_MASK_BUCK3_ILIM 0x30
+#define MP5416_MASK_BUCK4_ILIM 0x03
+#define MP5416_MASK_DVS_SLEWRATE 0xc0
+
+/* values in uV */
+#define MP5416_VOLT1_MIN 600000
+#define MP5416_VOLT1_MAX 2187500
+#define MP5416_VOLT1_STEP 12500
+#define MP5416_VOLT2_MIN 800000
+#define MP5416_VOLT2_MAX 3975000
+#define MP5416_VOLT2_STEP 25000
+
+#define MP5416_VOLT1_RANGE \
+ ((MP5416_VOLT1_MAX - MP5416_VOLT1_MIN)/MP5416_VOLT1_STEP + 1)
+#define MP5416_VOLT2_RANGE \
+ ((MP5416_VOLT2_MAX - MP5416_VOLT2_MIN)/MP5416_VOLT2_STEP + 1)
+
+#define MP5416BUCK(_name, _id, _ilim, _dreg, _dval, _vsel) \
+ [MP5416_BUCK ## _id] = { \
+ .id = MP5416_BUCK ## _id, \
+ .name = _name, \
+ .of_match = _name, \
+ .regulators_node = "regulators", \
+ .ops = &mp5416_buck_ops, \
+ .min_uV = MP5416_VOLT ##_vsel## _MIN, \
+ .uV_step = MP5416_VOLT ##_vsel## _STEP, \
+ .n_voltages = MP5416_VOLT ##_vsel## _RANGE, \
+ .curr_table = _ilim, \
+ .n_current_limits = ARRAY_SIZE(_ilim), \
+ .csel_reg = MP5416_REG_ILIM, \
+ .csel_mask = MP5416_MASK_BUCK ## _id ##_ILIM, \
+ .vsel_reg = MP5416_REG_BUCK ## _id, \
+ .vsel_mask = MP5416_MASK_VSET, \
+ .enable_reg = MP5416_REG_BUCK ## _id, \
+ .enable_mask = MP5416_REGULATOR_EN, \
+ .active_discharge_on = _dval, \
+ .active_discharge_reg = _dreg, \
+ .active_discharge_mask = _dval, \
+ .owner = THIS_MODULE, \
+ }
+
+#define MP5416LDO(_name, _id) \
+ [MP5416_LDO ## _id] = { \
+ .id = MP5416_LDO ## _id, \
+ .name = _name, \
+ .of_match = _name, \
+ .regulators_node = "regulators", \
+ .ops = &mp5416_ldo_ops, \
+ .min_uV = MP5416_VOLT2_MIN, \
+ .uV_step = MP5416_VOLT2_STEP, \
+ .n_voltages = MP5416_VOLT2_RANGE, \
+ .vsel_reg = MP5416_REG_LDO ##_id, \
+ .vsel_mask = MP5416_MASK_VSET, \
+ .enable_reg = MP5416_REG_LDO ##_id, \
+ .enable_mask = MP5416_REGULATOR_EN, \
+ .active_discharge_on = BIT(_id), \
+ .active_discharge_reg = MP5416_REG_CTL2, \
+ .active_discharge_mask = BIT(_id), \
+ .owner = THIS_MODULE, \
+ }
+
+enum mp5416_regulators {
+ MP5416_BUCK1,
+ MP5416_BUCK2,
+ MP5416_BUCK3,
+ MP5416_BUCK4,
+ MP5416_LDO1,
+ MP5416_LDO2,
+ MP5416_LDO3,
+ MP5416_LDO4,
+ MP5416_MAX_REGULATORS,
+};
+
+static const struct regmap_config mp5416_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x0d,
+};
+
+/* Current limits array (in uA)
+ * ILIM1 & ILIM3
+ */
+static const unsigned int mp5416_I_limits1[] = {
+ 3800000, 4600000, 5600000, 6800000
+};
+
+/* ILIM2 & ILIM4 */
+static const unsigned int mp5416_I_limits2[] = {
+ 2200000, 3200000, 4200000, 5200000
+};
+
+static int mp5416_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay);
+
+static const struct regulator_ops mp5416_ldo_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+};
+
+static const struct regulator_ops mp5416_buck_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .set_ramp_delay = mp5416_set_ramp_delay,
+};
+
+static struct regulator_desc mp5416_regulators_desc[MP5416_MAX_REGULATORS] = {
+ MP5416BUCK("buck1", 1, mp5416_I_limits1, MP5416_REG_CTL1, BIT(0), 1),
+ MP5416BUCK("buck2", 2, mp5416_I_limits2, MP5416_REG_CTL1, BIT(1), 2),
+ MP5416BUCK("buck3", 3, mp5416_I_limits1, MP5416_REG_CTL1, BIT(2), 1),
+ MP5416BUCK("buck4", 4, mp5416_I_limits2, MP5416_REG_CTL2, BIT(5), 2),
+ MP5416LDO("ldo1", 1),
+ MP5416LDO("ldo2", 2),
+ MP5416LDO("ldo3", 3),
+ MP5416LDO("ldo4", 4),
+};
+
+/*
+ * DVS ramp rate BUCK1 to BUCK4
+ * 00: 32mV/us
+ * 01: 16mV/us
+ * 10: 8mV/us
+ * 11: 4mV/us
+ */
+static int mp5416_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
+{
+ unsigned int ramp_val;
+
+ if (ramp_delay > 32000 || ramp_delay < 0)
+ return -EINVAL;
+
+ if (ramp_delay <= 4000)
+ ramp_val = 3;
+ else if (ramp_delay <= 8000)
+ ramp_val = 2;
+ else if (ramp_delay <= 16000)
+ ramp_val = 1;
+ else
+ ramp_val = 0;
+
+ return regmap_update_bits(rdev->regmap, MP5416_REG_CTL2,
+ MP5416_MASK_DVS_SLEWRATE, ramp_val << 6);
+}
+
+static int mp5416_i2c_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct regulator_config config = { NULL, };
+ struct regulator_dev *rdev;
+ struct regmap *regmap;
+ int i;
+
+ regmap = devm_regmap_init_i2c(client, &mp5416_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "Failed to allocate regmap!\n");
+ return PTR_ERR(regmap);
+ }
+
+ config.dev = dev;
+ config.regmap = regmap;
+
+ for (i = 0; i < MP5416_MAX_REGULATORS; i++) {
+ rdev = devm_regulator_register(dev,
+ &mp5416_regulators_desc[i],
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "Failed to register regulator!\n");
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+
+static const struct of_device_id mp5416_of_match[] = {
+ { .compatible = "mps,mp5416" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mp5416_of_match);
+
+static const struct i2c_device_id mp5416_id[] = {
+ { "mp5416", },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, mp5416_id);
+
+static struct i2c_driver mp5416_regulator_driver = {
+ .driver = {
+ .name = "mp5416",
+ .of_match_table = of_match_ptr(mp5416_of_match),
+ },
+ .probe_new = mp5416_i2c_probe,
+ .id_table = mp5416_id,
+};
+module_i2c_driver(mp5416_regulator_driver);
+
+MODULE_AUTHOR("Saravanan Sekar <sravanhome@...il.com>");
+MODULE_DESCRIPTION("MP5416 PMIC regulator driver");
+MODULE_LICENSE("GPL");
--
2.20.1
Powered by blists - more mailing lists