Message-ID: <CANpmjNOWzWB2GgJiZx7c96qoy-e+BDFUx9zYr+1hZS1SUS7LBQ@mail.gmail.com>
Date:   Wed, 12 Feb 2020 11:57:36 +0100
From:   Marco Elver <elver@...gle.com>
To:     John Hubbard <jhubbard@...dia.com>
Cc:     "Paul E. McKenney" <paulmck@...nel.org>,
        Andrey Konovalov <andreyknvl@...gle.com>,
        Alexander Potapenko <glider@...gle.com>,
        Dmitry Vyukov <dvyukov@...gle.com>,
        kasan-dev <kasan-dev@...glegroups.com>,
        LKML <linux-kernel@...r.kernel.org>,
        Andrew Morton <akpm@...ux-foundation.org>,
        David Hildenbrand <david@...hat.com>, Jan Kara <jack@...e.cz>,
        Qian Cai <cai@....pw>
Subject: Re: [PATCH v2 5/5] kcsan: Introduce ASSERT_EXCLUSIVE_BITS(var, mask)

On Tue, 11 Feb 2020 at 22:41, John Hubbard <jhubbard@...dia.com> wrote:
>
> On 2/11/20 8:04 AM, Marco Elver wrote:
> > This introduces ASSERT_EXCLUSIVE_BITS(var, mask).
> > ASSERT_EXCLUSIVE_BITS(var, mask) will cause KCSAN to assume that the
> > following access is safe w.r.t. data races (however, please see the
> > docbook comment for disclaimer here).
> >
> > For more context on why this was considered necessary, please see:
> >   http://lkml.kernel.org/r/1580995070-25139-1-git-send-email-cai@lca.pw
> >
> > In particular, before this patch, data races between reads (that use
> > @mask bits of an access that should not be modified concurrently) and
> > writes (that change ~@...k bits not used by the readers) would have been
> > annotated with "data_race()" (or "READ_ONCE()"). However, doing so would
> > then hide real problems: we would no longer be able to detect harmful
> > races between reads to @mask bits and writes to @mask bits.
> >
> > Therefore, by using ASSERT_EXCLUSIVE_BITS(var, mask), we accomplish:
> >
> >   1. Avoid proliferation of specific macros at the call sites: by
> >      including a single mask in the argument list, we can use the same
> >      macro in a wide variety of call sites, regardless of how and which
> >      bits in a field each call site actually accesses.
> >
> >   2. The existing code does not need to be modified (although READ_ONCE()
> >      may still be advisable if we cannot prove that the data race is
> >      always safe).
> >
> >   3. We catch bugs where the exclusive bits are modified concurrently.
> >
> >   4. We document properties of the current code.
>
>
> API looks good to me. (I'm not yet familiar enough with KCSAN to provide
> any useful review of about the various kcsan*() calls that implement the
> new macro.)
>
> btw, it might be helpful for newcomers if you mentioned which tree this
> is based on. I poked around briefly and failed several times to find one. :)

KCSAN is currently in -rcu (kcsan branch has the latest version),
-tip, and -next.

> You can add:
>
> Acked-by: John Hubbard <jhubbard@...dia.com>

Thank you!
-- Marco

>
> thanks,
> --
> John Hubbard
> NVIDIA
> >
> > Signed-off-by: Marco Elver <elver@...gle.com>
> > Cc: Andrew Morton <akpm@...ux-foundation.org>
> > Cc: David Hildenbrand <david@...hat.com>
> > Cc: Jan Kara <jack@...e.cz>
> > Cc: John Hubbard <jhubbard@...dia.com>
> > Cc: Paul E. McKenney <paulmck@...nel.org>
> > Cc: Qian Cai <cai@....pw>
> > ---
> > v2:
> > * Update API documentation to be clearer about how this compares to the
> >   existing assertions, and update use-cases. [Based on suggestions from
> >   John Hubbard]
> > * Update commit message. [Suggestions from John Hubbard]
> > ---
> >  include/linux/kcsan-checks.h | 69 ++++++++++++++++++++++++++++++++----
> >  kernel/kcsan/debugfs.c       | 15 +++++++-
> >  2 files changed, 77 insertions(+), 7 deletions(-)
> >
> > diff --git a/include/linux/kcsan-checks.h b/include/linux/kcsan-checks.h
> > index 4ef5233ff3f04..1b8aac5d6a0b5 100644
> > --- a/include/linux/kcsan-checks.h
> > +++ b/include/linux/kcsan-checks.h
> > @@ -152,9 +152,9 @@ static inline void kcsan_check_access(const volatile void *ptr, size_t size,
> >  #endif
> >
> >  /**
> > - * ASSERT_EXCLUSIVE_WRITER - assert no other threads are writing @var
> > + * ASSERT_EXCLUSIVE_WRITER - assert no concurrent writes to @var
> >   *
> > - * Assert that there are no other threads writing @var; other readers are
> > + * Assert that there are no concurrent writes to @var; other readers are
> >   * allowed. This assertion can be used to specify properties of concurrent code,
> >   * where violation cannot be detected as a normal data race.
> >   *
> > @@ -171,11 +171,11 @@ static inline void kcsan_check_access(const volatile void *ptr, size_t size,
> >       __kcsan_check_access(&(var), sizeof(var), KCSAN_ACCESS_ASSERT)
> >
> >  /**
> > - * ASSERT_EXCLUSIVE_ACCESS - assert no other threads are accessing @var
> > + * ASSERT_EXCLUSIVE_ACCESS - assert no concurrent accesses to @var
> >   *
> > - * Assert that no other thread is accessing @var (no readers nor writers). This
> > - * assertion can be used to specify properties of concurrent code, where
> > - * violation cannot be detected as a normal data race.
> > + * Assert that there are no concurrent accesses to @var (no readers nor
> > + * writers). This assertion can be used to specify properties of concurrent
> > + * code, where violation cannot be detected as a normal data race.
> >   *
> >   * For example, in a reference-counting algorithm where exclusive access is
> >   * expected after the refcount reaches 0. We can check that this property
> > @@ -191,4 +191,61 @@ static inline void kcsan_check_access(const volatile void *ptr, size_t size,
> >  #define ASSERT_EXCLUSIVE_ACCESS(var)                                           \
> >       __kcsan_check_access(&(var), sizeof(var), KCSAN_ACCESS_WRITE | KCSAN_ACCESS_ASSERT)
> >
> > +/**
> > + * ASSERT_EXCLUSIVE_BITS - assert no concurrent writes to subset of bits in @var
> > + *
> > + * Bit-granular variant of ASSERT_EXCLUSIVE_WRITER(var).
> > + *
> > + * Assert that there are no concurrent writes to a subset of bits in @var;
> > + * concurrent readers are permitted. This assertion captures more detailed
> > + * bit-level properties, compared to the other (word granularity) assertions.
> > + * Only the bits set in @mask are checked for concurrent modifications, while
> > + * ignoring the remaining bits, i.e. concurrent writes (or reads) to ~@...k bits
> > + * are ignored.
> > + *
> > + * Use this for variables, where some bits must not be modified concurrently,
> > + * yet other bits are expected to be modified concurrently.
> > + *
> > + * For example, variables where, after initialization, some bits are read-only,
> > + * but other bits may still be modified concurrently. A reader may wish to
> > + * assert that this is true as follows:
> > + *
> > + *   ASSERT_EXCLUSIVE_BITS(flags, READ_ONLY_MASK);
> > + *   foo = (READ_ONCE(flags) & READ_ONLY_MASK) >> READ_ONLY_SHIFT;
> > + *
> > + *   Note: The access that immediately follows ASSERT_EXCLUSIVE_BITS() is
> > + *   assumed to access the masked bits only, and KCSAN optimistically assumes it
> > + *   is therefore safe, even in the presence of data races, and marking it with
> > + *   READ_ONCE() is optional from KCSAN's point-of-view. We caution, however,
> > + *   that it may still be advisable to do so, since we cannot reason about all
> > + *   compiler optimizations when it comes to bit manipulations (on the reader
> > + *   and writer side). If you are sure nothing can go wrong, we can write the
> > + *   above simply as:
> > + *
> > + *   ASSERT_EXCLUSIVE_BITS(flags, READ_ONLY_MASK);
> > + *   foo = (flags & READ_ONLY_MASK) >> READ_ONLY_SHIFT;
> > + *
> > + * Another example, where this may be used, is when certain bits of @var may
> > + * only be modified when holding the appropriate lock, but other bits may still
> > + * be modified concurrently. Writers, where other bits may change concurrently,
> > + * could use the assertion as follows:
> > + *
> > + *   spin_lock(&foo_lock);
> > + *   ASSERT_EXCLUSIVE_BITS(flags, FOO_MASK);
> > + *   old_flags = READ_ONCE(flags);
> > + *   new_flags = (old_flags & ~FOO_MASK) | (new_foo << FOO_SHIFT);
> > + *   if (cmpxchg(&flags, old_flags, new_flags) != old_flags) { ... }
> > + *   spin_unlock(&foo_lock);
> > + *
> > + * @var variable to assert on
> > + * @mask only check for modifications to bits set in @mask
> > + */
> > +#define ASSERT_EXCLUSIVE_BITS(var, mask)                                       \
> > +     do {                                                                   \
> > +             kcsan_set_access_mask(mask);                                   \
> > +             __kcsan_check_access(&(var), sizeof(var), KCSAN_ACCESS_ASSERT);\
> > +             kcsan_set_access_mask(0);                                      \
> > +             kcsan_atomic_next(1);                                          \
> > +     } while (0)
> > +
> >  #endif /* _LINUX_KCSAN_CHECKS_H */
> > diff --git a/kernel/kcsan/debugfs.c b/kernel/kcsan/debugfs.c
> > index 9bbba0e57c9b3..2ff1961239778 100644
> > --- a/kernel/kcsan/debugfs.c
> > +++ b/kernel/kcsan/debugfs.c
> > @@ -100,8 +100,10 @@ static noinline void microbenchmark(unsigned long iters)
> >   * debugfs file from multiple tasks to generate real conflicts and show reports.
> >   */
> >  static long test_dummy;
> > +static long test_flags;
> >  static noinline void test_thread(unsigned long iters)
> >  {
> > +     const long CHANGE_BITS = 0xff00ff00ff00ff00L;
> >       const struct kcsan_ctx ctx_save = current->kcsan_ctx;
> >       cycles_t cycles;
> >
> > @@ -109,16 +111,27 @@ static noinline void test_thread(unsigned long iters)
> >       memset(&current->kcsan_ctx, 0, sizeof(current->kcsan_ctx));
> >
> >       pr_info("KCSAN: %s begin | iters: %lu\n", __func__, iters);
> > +     pr_info("test_dummy@%px, test_flags@%px\n", &test_dummy, &test_flags);
> >
> >       cycles = get_cycles();
> >       while (iters--) {
> > +             /* These all should generate reports. */
> >               __kcsan_check_read(&test_dummy, sizeof(test_dummy));
> > -             __kcsan_check_write(&test_dummy, sizeof(test_dummy));
> >               ASSERT_EXCLUSIVE_WRITER(test_dummy);
> >               ASSERT_EXCLUSIVE_ACCESS(test_dummy);
> >
> > +             ASSERT_EXCLUSIVE_BITS(test_flags, ~CHANGE_BITS); /* no report */
> > +             __kcsan_check_read(&test_flags, sizeof(test_flags)); /* no report */
> > +
> > +             ASSERT_EXCLUSIVE_BITS(test_flags, CHANGE_BITS); /* report */
> > +             __kcsan_check_read(&test_flags, sizeof(test_flags)); /* no report */
> > +
> >               /* not actually instrumented */
> >               WRITE_ONCE(test_dummy, iters);  /* to observe value-change */
> > +             __kcsan_check_write(&test_dummy, sizeof(test_dummy));
> > +
> > +             test_flags ^= CHANGE_BITS; /* generate value-change */
> > +             __kcsan_check_write(&test_flags, sizeof(test_flags));
> >       }
> >       cycles = get_cycles() - cycles;
> >
> >
>
> --
> You received this message because you are subscribed to the Google Groups "kasan-dev" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to kasan-dev+unsubscribe@...glegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/kasan-dev/29718fab-0da5-e734-796c-339144ac5080%40nvidia.com.

Powered by blists - more mailing lists