| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200213211427.33004-3-jernej.skrabec@siol.net>
Date: Thu, 13 Feb 2020 22:14:27 +0100
From: Jernej Skrabec <jernej.skrabec@...l.net>
To: mripard@...nel.org, wens@...e.org
Cc: robh+dt@...nel.org, mark.rutland@....com, a.zummo@...ertech.it,
alexandre.belloni@...tlin.com,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-rtc@...r.kernel.org,
jernej.skrabec@...l.net
Subject: [PATCH 2/2] arm64: dts: allwinner: h6: Move ext. oscillator to board DTs
It turns out that not all H6 boards have external 32kHz oscillator.
Currently the only one known such H6 board is Tanix TX6.
Move external oscillator node from common H6 dtsi to board specific dts
files where present.
Signed-off-by: Jernej Skrabec <jernej.skrabec@...l.net>
---
.../boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 11 +++++++++++
.../arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 11 +++++++++++
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 11 +++++++++++
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 11 +++++++++++
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 8 --------
5 files changed, 44 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index df6d872c34e2..8f09d209359b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -32,6 +32,13 @@ hdmi_con_in: endpoint {
};
};
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
leds {
compatible = "gpio-leds";
@@ -275,6 +282,10 @@ &r_pio {
vcc-pm-supply = <®_aldo1>;
};
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
&spdif {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index c311eee52a35..ca11e19c2d17 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -32,6 +32,13 @@ hdmi_con_in: endpoint {
};
};
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
leds {
compatible = "gpio-leds";
@@ -276,6 +283,10 @@ &r_ir {
status = "okay";
};
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index 37f4c57597d4..37fc3f3697f7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -20,6 +20,13 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
leds {
compatible = "gpio-leds";
@@ -197,6 +204,10 @@ &r_ir {
status = "okay";
};
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 3c9dd0d69754..b0642d841933 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -21,6 +21,13 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ ext_osc32k: ext_osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
hdmi_connector: connector {
compatible = "hdmi-connector";
type = "a";
@@ -279,6 +286,10 @@ &r_pio {
vcc-pm-supply = <®_aldo1>;
};
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
/*
* The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
* flash and eMMC at the same time, as one of them would fail probing.
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 41b58ffa8596..3ad7c78e9c43 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -62,13 +62,6 @@ osc24M: osc24M_clk {
clock-output-names = "osc24M";
};
- ext_osc32k: ext_osc32k_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "ext_osc32k";
- };
-
pmu {
compatible = "arm,cortex-a53-pmu",
"arm,armv8-pmuv3";
@@ -855,7 +848,6 @@ rtc: rtc@...0000 {
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clock-output-names = "osc32k", "osc32k-out", "iosc";
- clocks = <&ext_osc32k>;
#clock-cells = <1>;
};
--
2.25.0
Powered by blists - more mailing lists