lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Fri, 14 Feb 2020 11:10:57 +0800
From:   Shawn Guo <>
To:     Stefan Agner <>
        Stefan Agner <>
Subject: Re: [PATCH] ARM: dts: imx7-colibri: add gpio-line-names

On Wed, Jan 29, 2020 at 10:53:36PM +0100, Stefan Agner wrote:
> From: Stefan Agner <>
> Add Colibri SODIMM numbers as GPIO line names on module level. The GPIO
> lines with a name are all available on the SODIMM edge connector of the
> Colibri iMX7 module and therefore a customer might use it as a GPIO. The
> Toradex Evaluation Board has the SODIMM numbers printed on the silk-
> screen. This allows a customer to quickly control a GPIO on a pin-header
> by using the name printed next to it.
> Putting the GPIO line name on module level makes sure that a customer
> gets a reasonable default. If more meaningful names are available on a
> custom carrier board, the user can overwrite the line names in a carrier
> board level device tree.
> The eMMC based modules share all GPIO names except two GPIOs on bank 6
> which are not available on the raw NAND devices. Hence overwrite GPIO
> line names of bank 6 in the eMMC specific device tree file.
> Signed-off-by: Stefan Agner <>

Applied, thanks.

Powered by blists - more mailing lists