lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200214162122.19794-76-sashal@kernel.org>
Date:   Fri, 14 Feb 2020 11:20:16 -0500
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Geert Uytterhoeven <geert+renesas@...der.be>,
        Sasha Levin <sashal@...nel.org>, linux-sh@...r.kernel.org,
        linux-renesas-soc@...r.kernel.org, linux-gpio@...r.kernel.org
Subject: [PATCH AUTOSEL 4.9 076/141] pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs

From: Geert Uytterhoeven <geert+renesas@...der.be>

[ Upstream commit 02aeb2f21530c98fc3ca51028eda742a3fafbd9f ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
first two CAN outputs.

A closer look reveals other issues:
  - Some functionality is available on alternative pins, but the
    PINMUX_DATA() entries is using the wrong marks,
  - Several configurations are missing.

Fix this by:
  - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and
    CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK,
    resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the
    corresponding enum IDs,
  - Adding all missing enum IDs and marks,
  - Use the right (*_PJ2x) variants for alternative pins,
  - Adding all missing configurations to pinmux_data[],
  - Adding all missing function GPIO definitions to pinmux_func_gpios[].

See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00:
  [1] Table 1.4 List of Pins
  [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One
      Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel
      (32 Mailboxes × 1 Channel),
  [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as
      One Channel (96 Mailboxes × 1 Channel),
  [4] Table 48.3 Multiplexed Pins (Port B),
  [5] Table 48.4 Multiplexed Pins (Port C),
  [6] Table 48.10 Multiplexed Pins (Port J),
  [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5).

Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 arch/sh/include/cpu-sh2a/cpu/sh7269.h | 11 ++++++--
 drivers/pinctrl/sh-pfc/pfc-sh7269.c   | 39 ++++++++++++++++++---------
 2 files changed, 36 insertions(+), 14 deletions(-)

diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
index 2a0ca8780f0d8..e4caddd443daf 100644
--- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h
+++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
@@ -79,8 +79,15 @@ enum {
 	GPIO_FN_WDTOVF,
 
 	/* CAN */
-	GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
-	GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1, GPIO_FN_CRX0_CRX1_CRX2,
+	GPIO_FN_CTX2, GPIO_FN_CRX2,
+	GPIO_FN_CTX1, GPIO_FN_CRX1,
+	GPIO_FN_CTX0, GPIO_FN_CRX0,
+	GPIO_FN_CTX0_CTX1, GPIO_FN_CRX0_CRX1,
+	GPIO_FN_CTX0_CTX1_CTX2, GPIO_FN_CRX0_CRX1_CRX2,
+	GPIO_FN_CTX2_PJ21, GPIO_FN_CRX2_PJ20,
+	GPIO_FN_CTX1_PJ23, GPIO_FN_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_PJ23, GPIO_FN_CRX0_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_CTX2_PJ21, GPIO_FN_CRX0_CRX1_CRX2_PJ20,
 
 	/* DMAC */
 	GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7269.c b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
index cfdb4fc177c3e..3df0c0d139d08 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7269.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
@@ -740,13 +740,12 @@ enum {
 	CRX0_MARK, CTX0_MARK,
 	CRX1_MARK, CTX1_MARK,
 	CRX2_MARK, CTX2_MARK,
-	CRX0_CRX1_MARK,
-	CRX0_CRX1_CRX2_MARK,
-	CTX0CTX1CTX2_MARK,
+	CRX0_CRX1_MARK, CTX0_CTX1_MARK,
+	CRX0_CRX1_CRX2_MARK, CTX0_CTX1_CTX2_MARK,
 	CRX1_PJ22_MARK, CTX1_PJ23_MARK,
 	CRX2_PJ20_MARK, CTX2_PJ21_MARK,
-	CRX0CRX1_PJ22_MARK,
-	CRX0CRX1CRX2_PJ20_MARK,
+	CRX0_CRX1_PJ22_MARK, CTX0_CTX1_PJ23_MARK,
+	CRX0_CRX1_CRX2_PJ20_MARK, CTX0_CTX1_CTX2_PJ21_MARK,
 
 	/* VDC */
 	DV_CLK_MARK,
@@ -824,6 +823,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(CS3_MARK, PC8MD_001),
 	PINMUX_DATA(TXD7_MARK, PC8MD_010),
 	PINMUX_DATA(CTX1_MARK, PC8MD_011),
+	PINMUX_DATA(CTX0_CTX1_MARK, PC8MD_100),
 
 	PINMUX_DATA(PC7_DATA, PC7MD_000),
 	PINMUX_DATA(CKE_MARK, PC7MD_001),
@@ -836,11 +836,12 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(CAS_MARK, PC6MD_001),
 	PINMUX_DATA(SCK7_MARK, PC6MD_010),
 	PINMUX_DATA(CTX0_MARK, PC6MD_011),
+	PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC6MD_100),
 
 	PINMUX_DATA(PC5_DATA, PC5MD_000),
 	PINMUX_DATA(RAS_MARK, PC5MD_001),
 	PINMUX_DATA(CRX0_MARK, PC5MD_011),
-	PINMUX_DATA(CTX0CTX1CTX2_MARK, PC5MD_100),
+	PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC5MD_100),
 	PINMUX_DATA(IRQ0_PC_MARK, PC5MD_101),
 
 	PINMUX_DATA(PC4_DATA, PC4MD_00),
@@ -1292,30 +1293,32 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010),
 	PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011),
 	PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100),
-	PINMUX_DATA(CTX1_MARK, PJ23MD_101),
+	PINMUX_DATA(CTX1_PJ23_MARK, PJ23MD_101),
+	PINMUX_DATA(CTX0_CTX1_PJ23_MARK, PJ23MD_110),
 
 	PINMUX_DATA(PJ22_DATA, PJ22MD_000),
 	PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001),
 	PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010),
 	PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011),
 	PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100),
-	PINMUX_DATA(CRX1_MARK, PJ22MD_101),
-	PINMUX_DATA(CRX0_CRX1_MARK, PJ22MD_110),
+	PINMUX_DATA(CRX1_PJ22_MARK, PJ22MD_101),
+	PINMUX_DATA(CRX0_CRX1_PJ22_MARK, PJ22MD_110),
 
 	PINMUX_DATA(PJ21_DATA, PJ21MD_000),
 	PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001),
 	PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010),
 	PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011),
 	PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100),
-	PINMUX_DATA(CTX2_MARK, PJ21MD_101),
+	PINMUX_DATA(CTX2_PJ21_MARK, PJ21MD_101),
+	PINMUX_DATA(CTX0_CTX1_CTX2_PJ21_MARK, PJ21MD_110),
 
 	PINMUX_DATA(PJ20_DATA, PJ20MD_000),
 	PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001),
 	PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010),
 	PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011),
 	PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100),
-	PINMUX_DATA(CRX2_MARK, PJ20MD_101),
-	PINMUX_DATA(CRX0CRX1CRX2_PJ20_MARK, PJ20MD_110),
+	PINMUX_DATA(CRX2_PJ20_MARK, PJ20MD_101),
+	PINMUX_DATA(CRX0_CRX1_CRX2_PJ20_MARK, PJ20MD_110),
 
 	PINMUX_DATA(PJ19_DATA, PJ19MD_000),
 	PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001),
@@ -1666,12 +1669,24 @@ static const struct pinmux_func pinmux_func_gpios[] = {
 	GPIO_FN(WDTOVF),
 
 	/* CAN */
+	GPIO_FN(CTX2),
+	GPIO_FN(CRX2),
 	GPIO_FN(CTX1),
 	GPIO_FN(CRX1),
 	GPIO_FN(CTX0),
 	GPIO_FN(CRX0),
+	GPIO_FN(CTX0_CTX1),
 	GPIO_FN(CRX0_CRX1),
+	GPIO_FN(CTX0_CTX1_CTX2),
 	GPIO_FN(CRX0_CRX1_CRX2),
+	GPIO_FN(CTX2_PJ21),
+	GPIO_FN(CRX2_PJ20),
+	GPIO_FN(CTX1_PJ23),
+	GPIO_FN(CRX1_PJ22),
+	GPIO_FN(CTX0_CTX1_PJ23),
+	GPIO_FN(CRX0_CRX1_PJ22),
+	GPIO_FN(CTX0_CTX1_CTX2_PJ21),
+	GPIO_FN(CRX0_CRX1_CRX2_PJ20),
 
 	/* DMAC */
 	GPIO_FN(TEND0),
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ