linux-kernel - [PATCH AUTOSEL 4.9 015/141] pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200214162122.19794-15-sashal@kernel.org>
Date:   Fri, 14 Feb 2020 11:19:15 -0500
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Hans de Goede <hdegoede@...hat.com>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Sasha Levin <sashal@...nel.org>, linux-gpio@...r.kernel.org
Subject: [PATCH AUTOSEL 4.9 015/141] pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins

From: Hans de Goede <hdegoede@...hat.com>

[ Upstream commit a23680594da7a9e2696dbcf4f023e9273e2fa40b ]

Suspending Goodix touchscreens requires changing the interrupt pin to
output before sending them a power-down command. Followed by wiggling
the interrupt pin to wake the device up, after which it is put back
in input mode.

On Bay Trail devices with a Goodix touchscreen direct-irq mode is used
in combination with listing the pin as a normal GpioIo resource.

This works fine, until the goodix driver gets rmmod-ed and then insmod-ed
again. In this case byt_gpio_disable_free() calls
byt_gpio_clear_triggering() which clears the IRQ flags and after that the
(direct) IRQ no longer triggers.

This commit fixes this by adding a check for the BYT_DIRECT_IRQ_EN flag
to byt_gpio_clear_triggering().

Note that byt_gpio_clear_triggering() only gets called from
byt_gpio_disable_free() for direct-irq enabled pins, as these are excluded
from the irq_valid mask by byt_init_irq_valid_mask().

Signed-off-by: Hans de Goede <hdegoede@...hat.com>
Acked-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/pinctrl/intel/pinctrl-baytrail.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index f83a2a60d9c9b..1e945aa77734b 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -958,7 +958,13 @@ static void byt_gpio_clear_triggering(struct byt_gpio *vg, unsigned int offset)

 	raw_spin_lock_irqsave(&byt_lock, flags);
 	value = readl(reg);
-	value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+
+	/* Do not clear direct-irq enabled IRQs (from gpio_disable_free) */
+	if (value & BYT_DIRECT_IRQ_EN)
+		/* nothing to do */ ;
+	else
+		value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+
 	writel(value, reg);
 	raw_spin_unlock_irqrestore(&byt_lock, flags);
 }
-- 
2.20.1