[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CALvZod4sum32d_ujFrRFhBVrE6TmhHrwWu=LPX+mG0urD4w80w@mail.gmail.com>
Date: Fri, 14 Feb 2020 13:52:46 -0800
From: Shakeel Butt <shakeelb@...gle.com>
To: Roman Gushchin <guro@...com>
Cc: Johannes Weiner <hannes@...xchg.org>,
Eric Dumazet <edumazet@...gle.com>,
Greg Thelen <gthelen@...gle.com>,
Michal Hocko <mhocko@...nel.org>,
Vladimir Davydov <vdavydov.dev@...il.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Cgroups <cgroups@...r.kernel.org>, Linux MM <linux-mm@...ck.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] memcg: net: do not associate sock with unrelated memcg
On Fri, Feb 14, 2020 at 1:47 PM Roman Gushchin <guro@...com> wrote:
>
> Hello, Shakeel!
>
> On Thu, Feb 13, 2020 at 11:12:33PM -0800, Shakeel Butt wrote:
> > We are testing network memory accounting in our setup and noticed
> > inconsistent network memory usage and often unrelated memcgs network
> > usage correlates with testing workload. On further inspection, it seems
> > like mem_cgroup_sk_alloc() is broken in irq context specially for
> > cgroup v1.
>
> A great catch!
>
> >
> > mem_cgroup_sk_alloc() can be called in irq context and kind
> > of assumes that it can only happen from sk_clone_lock() and the source
> > sock object has already associated memcg. However in cgroup v1, where
> > network memory accounting is opt-in, the source sock can be not
> > associated with any memcg and the new cloned sock can get associated
> > with unrelated interrupted memcg.
> >
> > Cgroup v2 can also suffer if the source sock object was created by
> > process in the root memcg or if sk_alloc() is called in irq context.
>
> Do you mind sharing a call trace?
>
Sure, see below. I added a dump_stack() in mem_cgroup_sk_alloc().
[ 647.255327] CPU: 68 PID: 15859 Comm: ssh Tainted: G O
5.6.0-smp-DEV #1
[ 647.255328] Hardware name: ...
[ 647.255328] Call Trace:
[ 647.255329] <IRQ>
[ 647.255333] dump_stack+0x57/0x75
[ 647.255336] mem_cgroup_sk_alloc+0xe9/0xf0
[ 647.255337] sk_clone_lock+0x2a7/0x420
[ 647.255339] inet_csk_clone_lock+0x1b/0x110
[ 647.255340] tcp_create_openreq_child+0x23/0x3b0
[ 647.255342] tcp_v6_syn_recv_sock+0x88/0x730
[ 647.255343] tcp_check_req+0x429/0x560
[ 647.255345] tcp_v6_rcv+0x72d/0xa40
[ 647.255347] ip6_protocol_deliver_rcu+0xc9/0x400
[ 647.255348] ip6_input+0x44/0xd0
[ 647.255349] ? ip6_protocol_deliver_rcu+0x400/0x400
[ 647.255350] ip6_rcv_finish+0x71/0x80
[ 647.255351] ipv6_rcv+0x5b/0xe0
[ 647.255352] ? ip6_sublist_rcv+0x2e0/0x2e0
[ 647.255354] process_backlog+0x108/0x1e0
[ 647.255355] net_rx_action+0x26b/0x460
[ 647.255357] __do_softirq+0x104/0x2a6
[ 647.255358] do_softirq_own_stack+0x2a/0x40
[ 647.255359] </IRQ>
[ 647.255361] do_softirq.part.19+0x40/0x50
[ 647.255362] __local_bh_enable_ip+0x51/0x60
[ 647.255363] ip6_finish_output2+0x23d/0x520
[ 647.255365] ? ip6table_mangle_hook+0x55/0x160
[ 647.255366] __ip6_finish_output+0xa1/0x100
[ 647.255367] ip6_finish_output+0x30/0xd0
[ 647.255368] ip6_output+0x73/0x120
[ 647.255369] ? __ip6_finish_output+0x100/0x100
[ 647.255370] ip6_xmit+0x2e3/0x600
[ 647.255372] ? ipv6_anycast_cleanup+0x50/0x50
[ 647.255373] ? inet6_csk_route_socket+0x136/0x1e0
[ 647.255374] ? skb_free_head+0x1e/0x30
[ 647.255375] inet6_csk_xmit+0x95/0xf0
[ 647.255377] __tcp_transmit_skb+0x5b4/0xb20
[ 647.255378] __tcp_send_ack.part.60+0xa3/0x110
[ 647.255379] tcp_send_ack+0x1d/0x20
[ 647.255380] tcp_rcv_state_process+0xe64/0xe80
[ 647.255381] ? tcp_v6_connect+0x5d1/0x5f0
[ 647.255383] tcp_v6_do_rcv+0x1b1/0x3f0
[ 647.255384] ? tcp_v6_do_rcv+0x1b1/0x3f0
[ 647.255385] __release_sock+0x7f/0xd0
[ 647.255386] release_sock+0x30/0xa0
[ 647.255388] __inet_stream_connect+0x1c3/0x3b0
[ 647.255390] ? prepare_to_wait+0xb0/0xb0
[ 647.255391] inet_stream_connect+0x3b/0x60
[ 647.255394] __sys_connect+0x101/0x120
[ 647.255395] ? __sys_getsockopt+0x11b/0x140
[ 647.255397] __x64_sys_connect+0x1a/0x20
[ 647.255398] do_syscall_64+0x51/0x200
[ 647.255399] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 647.255401] RIP: 0033:0x7f45464fcd50
> Also, shouldn't cgroup_sk_alloc() be changed in a similar way?
>
I will check cgroup_sk_alloc() too.
Thanks,
Shakeel
Powered by blists - more mailing lists