[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200214154854.6746-266-sashal@kernel.org>
Date: Fri, 14 Feb 2020 10:44:18 -0500
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Chen Zhou <chenzhou10@...wei.com>, Hulk Robot <hulkci@...wei.com>,
"David S . Miller" <davem@...emloft.net>,
Sasha Levin <sashal@...nel.org>, netdev@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org
Subject: [PATCH AUTOSEL 5.5 266/542] net/wan/fsl_ucc_hdlc: remove set but not used variables 'ut_info' and 'ret'
From: Chen Zhou <chenzhou10@...wei.com>
[ Upstream commit 270fe2ceda66b6964d4c6f261d7f562a02c1c786 ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/wan/fsl_ucc_hdlc.c: In function ucc_hdlc_irq_handler:
drivers/net/wan/fsl_ucc_hdlc.c:643:23:
warning: variable ut_info set but not used [-Wunused-but-set-variable]
drivers/net/wan/fsl_ucc_hdlc.c: In function uhdlc_suspend:
drivers/net/wan/fsl_ucc_hdlc.c:880:23:
warning: variable ut_info set but not used [-Wunused-but-set-variable]
drivers/net/wan/fsl_ucc_hdlc.c: In function uhdlc_resume:
drivers/net/wan/fsl_ucc_hdlc.c:925:6:
warning: variable ret set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@...wei.com>
Signed-off-by: Chen Zhou <chenzhou10@...wei.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/net/wan/fsl_ucc_hdlc.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index 4ad0a0c33d853..607cb1edff964 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -640,11 +640,9 @@ static irqreturn_t ucc_hdlc_irq_handler(int irq, void *dev_id)
struct ucc_hdlc_private *priv = (struct ucc_hdlc_private *)dev_id;
struct net_device *dev = priv->ndev;
struct ucc_fast_private *uccf;
- struct ucc_tdm_info *ut_info;
u32 ucce;
u32 uccm;
- ut_info = priv->ut_info;
uccf = priv->uccf;
ucce = ioread32be(uccf->p_ucce);
@@ -877,7 +875,6 @@ static void resume_clk_config(struct ucc_hdlc_private *priv)
static int uhdlc_suspend(struct device *dev)
{
struct ucc_hdlc_private *priv = dev_get_drvdata(dev);
- struct ucc_tdm_info *ut_info;
struct ucc_fast __iomem *uf_regs;
if (!priv)
@@ -889,7 +886,6 @@ static int uhdlc_suspend(struct device *dev)
netif_device_detach(priv->ndev);
napi_disable(&priv->napi);
- ut_info = priv->ut_info;
uf_regs = priv->uf_regs;
/* backup gumr guemr*/
@@ -922,7 +918,7 @@ static int uhdlc_resume(struct device *dev)
struct ucc_fast __iomem *uf_regs;
struct ucc_fast_private *uccf;
struct ucc_fast_info *uf_info;
- int ret, i;
+ int i;
u32 cecr_subblock;
u16 bd_status;
@@ -967,16 +963,16 @@ static int uhdlc_resume(struct device *dev)
/* Write to QE CECR, UCCx channel to Stop Transmission */
cecr_subblock = ucc_fast_get_qe_cr_subblock(uf_info->ucc_num);
- ret = qe_issue_cmd(QE_STOP_TX, cecr_subblock,
- (u8)QE_CR_PROTOCOL_UNSPECIFIED, 0);
+ qe_issue_cmd(QE_STOP_TX, cecr_subblock,
+ (u8)QE_CR_PROTOCOL_UNSPECIFIED, 0);
/* Set UPSMR normal mode */
iowrite32be(0, &uf_regs->upsmr);
/* init parameter base */
cecr_subblock = ucc_fast_get_qe_cr_subblock(uf_info->ucc_num);
- ret = qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, cecr_subblock,
- QE_CR_PROTOCOL_UNSPECIFIED, priv->ucc_pram_offset);
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, cecr_subblock,
+ QE_CR_PROTOCOL_UNSPECIFIED, priv->ucc_pram_offset);
priv->ucc_pram = (struct ucc_hdlc_param __iomem *)
qe_muram_addr(priv->ucc_pram_offset);
--
2.20.1
Powered by blists - more mailing lists