[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1581932974-21654-2-git-send-email-akashast@codeaurora.org>
Date: Mon, 17 Feb 2020 15:19:33 +0530
From: Akash Asthana <akashast@...eaurora.org>
To: robh+dt@...nel.org, agross@...nel.org, mark.rutland@....com
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, mgautam@...eaurora.org,
rojay@...eaurora.org, skakit@...eaurora.org, swboyd@...omium.org,
Akash Asthana <akashast@...eaurora.org>
Subject: [PATCH 1/2] dt-bindings: spi: Convert QSPI bindings to YAML
Convert QSPI bindings to DT schema format using json-schema.
Signed-off-by: Akash Asthana <akashast@...eaurora.org>
---
.../devicetree/bindings/spi/qcom,spi-qcom-qspi.txt | 36 ---------
.../bindings/spi/qcom,spi-qcom-qspi.yaml | 89 ++++++++++++++++++++++
2 files changed, 89 insertions(+), 36 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
deleted file mode 100644
index 1d64b61..0000000
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Qualcomm Quad Serial Peripheral Interface (QSPI)
-
-The QSPI controller allows SPI protocol communication in single, dual, or quad
-wire transmission modes for read/write access to slaves such as NOR flash.
-
-Required properties:
-- compatible: An SoC specific identifier followed by "qcom,qspi-v1", such as
- "qcom,sdm845-qspi", "qcom,qspi-v1"
-- reg: Should contain the base register location and length.
-- interrupts: Interrupt number used by the controller.
-- clocks: Should contain the core and AHB clock.
-- clock-names: Should be "core" for core clock and "iface" for AHB clock.
-
-SPI slave nodes must be children of the SPI master node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
- qspi: spi@...f000 {
- compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
- reg = <0x88df000 0x600>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "iface", "core";
- clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
- <&gcc GCC_QSPI_CORE_CLK>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
- spi-tx-bus-width = <2>;
- spi-rx-bus-width = <2>;
- };
- };
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
new file mode 100644
index 0000000..977070a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Quad Serial Peripheral Interface (QSPI)
+
+maintainers:
+ - Mukesh Savaliya <msavaliy@...eaurora.org>
+ - Akash Asthana <akashast@...eaurora.org>
+
+description: |
+ The QSPI controller allows SPI protocol communication in single, dual, or quad
+ wire transmission modes for read/write access to slaves such as NOR flash.
+
+allOf:
+ - $ref: /spi/spi-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sdm845-qspi
+ - const: qcom,qspi-v1
+
+ reg:
+ description: Base register location and length.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: iface
+ - const: core
+
+ clocks:
+ items:
+ - description: AHB clock
+ - description: QSPI core clock.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+ - "#address-cells"
+ - "#size-cells"
+
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc: soc@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ qspi: spi@...f000 {
+ compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
+ reg = <0 0x88df000 0 0x600>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "iface", "core";
+ clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <&gcc GCC_QSPI_CORE_CLK>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ };
+ };
+ };
+
+...
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
Powered by blists - more mailing lists