2020-02-17 13:22:53 export USER=root
2020-02-17 13:22:53 ./build.sh
Building TNC testing tools
Building wlantest
Building hs20-osu-client
Building hostapd
Building wpa_supplicant
2020-02-17 13:24:57 ./start.sh
2020-02-17 13:24:57 	./run-tests.py ap_acl_accept 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acl_accept 1/1
Test: MAC ACL accept list
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan1 to AP
Connect STA wlan0 to AP
PASS ap_acl_accept 1.636848 2020-02-17 13:25:00.814701
passed all 1 test case(s)
2020-02-17 13:25:00 	./run-tests.py ap_acl_deny 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acl_deny 1/1
Test: MAC ACL deny list
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
PASS ap_acl_deny 1.484925 2020-02-17 13:25:02.604896
passed all 1 test case(s)
2020-02-17 13:25:02 	./run-tests.py ap_acl_mgmt 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acl_mgmt 1/1
Test: MAC ACL accept/deny management
Starting AP wlan3
accept: []
deny: ['01:01:01:01:01:01 VLAN_ID=0', '02:00:00:00:00:00 VLAN_ID=0', '03:01:01:01:01:03 VLAN_ID=0']
accept: ['22:33:44:55:66:77 VLAN_ID=0']
deny: ['01:01:01:01:01:01 VLAN_ID=0', '02:00:00:00:00:00 VLAN_ID=0', '03:01:01:01:01:03 VLAN_ID=0', '22:33:44:55:66:88 VLAN_ID=2']
accept: []
deny: ['01:01:01:01:01:01 VLAN_ID=0', '02:00:00:00:00:00 VLAN_ID=0', '03:01:01:01:01:03 VLAN_ID=0']
accept: []
deny: []
Connect STA wlan0 to AP
PASS ap_acl_mgmt 0.380203 2020-02-17 13:25:03.293339
passed all 1 test case(s)
2020-02-17 13:25:03 	./run-tests.py ap_acs 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs 1/1
Test: Automatic channel selection
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_acs 7.35308 2020-02-17 13:25:10.951772
passed all 1 test case(s)
2020-02-17 13:25:10 	./run-tests.py ap_acs_40mhz 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_40mhz 1/1
Test: Automatic channel selection for 40 MHz channel
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_acs_40mhz 8.847306 2020-02-17 13:25:20.106607
passed all 1 test case(s)
2020-02-17 13:25:20 	./run-tests.py ap_acs_40mhz_minus 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_40mhz_minus 1/1
Test: Automatic channel selection for HT40- channel
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
PASS ap_acs_40mhz_minus 0.778098 2020-02-17 13:25:21.194259
passed all 1 test case(s)
2020-02-17 13:25:21 	./run-tests.py ap_acs_5ghz 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_5ghz 1/1
Test: Automatic channel selection on 5 GHz
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
Country code at the end: 00
PASS ap_acs_5ghz 7.445753 2020-02-17 13:25:28.945947
passed all 1 test case(s)
2020-02-17 13:25:28 	./run-tests.py ap_acs_5ghz_40mhz 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_5ghz_40mhz 1/1
Test: Automatic channel selection on 5 GHz for 40 MHz channel
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
Country code at the end: 00
PASS ap_acs_5ghz_40mhz 7.698324 2020-02-17 13:25:36.953437
passed all 1 test case(s)
2020-02-17 13:25:36 	./run-tests.py ap_acs_bias 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_bias 1/1
Test: Automatic channel selection with bias values
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_acs_bias 7.297314 2020-02-17 13:25:44.553393
passed all 1 test case(s)
2020-02-17 13:25:44 	./run-tests.py ap_acs_chanlist 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_chanlist 1/1
Test: Automatic channel selection with chanlist set
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_acs_chanlist 2.439493 2020-02-17 13:25:47.325039
passed all 1 test case(s)
2020-02-17 13:25:47 	./run-tests.py ap_acs_dfs --long
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_dfs 1/1
Test: Automatic channel selection, HT scan, and DFS [long]
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
wlan0: Country code not reset back to 00: is 98
Country code remains set - expect following test cases to fail
FAIL ap_acs_dfs 69.805231 2020-02-17 13:26:57.455208
passed 0 test case(s)
skipped 0 test case(s)
failed tests: ap_acs_dfs
wlan0: Country code not reset back to 00: is 98
Country code remains set - expect following test cases to fail
2020-02-17 13:26:57 	./run-tests.py ap_acs_errors 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
country=98 workaround - try to clear state
Connect STA wlan0 to AP
START ap_acs_errors 1/1
Test: Automatic channel selection failures
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
PASS ap_acs_errors 1.004026 2020-02-17 13:26:59.661918
passed all 1 test case(s)
2020-02-17 13:26:59 	./run-tests.py ap_acs_exclude_dfs 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_exclude_dfs 1/1
Test: Automatic channel selection, exclude DFS
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
AP setup timed out
Traceback (most recent call last):
  File "./run-tests.py", line 519, in main
    t(dev, apdev, params)
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_ap_acs.py", line 444, in test_ap_acs_exclude_dfs
    wait_acs(hapd)
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_ap_acs.py", line 55, in wait_acs
    raise Exception("AP setup timed out")
Exception: AP setup timed out
FAIL ap_acs_exclude_dfs 8.861759 2020-02-17 13:27:08.849919
passed 0 test case(s)
skipped 0 test case(s)
failed tests: ap_acs_exclude_dfs
2020-02-17 13:27:08 	./run-tests.py ap_acs_freqlist 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_freqlist 1/1
Test: Automatic channel selection with freqlist set
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_acs_freqlist 7.292859 2020-02-17 13:27:16.469482
passed all 1 test case(s)
2020-02-17 13:27:16 	./run-tests.py ap_acs_invalid_chanlist 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_invalid_chanlist 1/1
Test: Automatic channel selection with invalid chanlist
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
PASS ap_acs_invalid_chanlist 0.327041 2020-02-17 13:27:17.111067
passed all 1 test case(s)
2020-02-17 13:27:17 	./run-tests.py ap_acs_survey 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_survey 1/1
Test: Automatic channel selection using acs_survey parameter
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_acs_survey 1.938383 2020-02-17 13:27:19.371907
passed all 1 test case(s)
2020-02-17 13:27:19 	./run-tests.py ap_acs_vht 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_vht 1/1
Test: Automatic channel selection for VHT
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
Country code at the end: 00
PASS ap_acs_vht 7.680237 2020-02-17 13:27:27.355966
passed all 1 test case(s)
2020-02-17 13:27:27 	./run-tests.py ap_acs_vht160 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_vht160 1/1
Test: Automatic channel selection for VHT160
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
Country code at the end: 98
Try to clear country
Connect STA wlan0 to AP
PASS ap_acs_vht160 2.741302 2020-02-17 13:27:30.405942
passed all 1 test case(s)
2020-02-17 13:27:30 	./run-tests.py ap_acs_vht160_dfs --long
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_vht160_dfs 1/1
Test: Automatic channel selection 160 MHz, HT scan, and DFS [long]
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
wlan0: Country code not reset back to 00: is 98
Country code remains set - expect following test cases to fail
FAIL ap_acs_vht160_dfs 69.161831 2020-02-17 13:28:39.876805
passed 0 test case(s)
skipped 0 test case(s)
failed tests: ap_acs_vht160_dfs
wlan0: Country code not reset back to 00: is 98
Country code remains set - expect following test cases to fail
2020-02-17 13:28:39 	./run-tests.py ap_acs_vht160_scan_disable 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
country=98 workaround - try to clear state
Connect STA wlan0 to AP
START ap_acs_vht160_scan_disable 1/1
Test: Automatic channel selection for VHT160 and DISABLE during scan
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Country code at the end: 00
PASS ap_acs_vht160_scan_disable 4.163608 2020-02-17 13:28:45.219911
passed all 1 test case(s)
2020-02-17 13:28:45 	./run-tests.py ap_acs_vht40 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_acs_vht40 1/1
Test: Automatic channel selection for VHT40
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Connect STA wlan0 to AP
Country code at the end: 00
PASS ap_acs_vht40 2.440372 2020-02-17 13:28:47.974293
passed all 1 test case(s)
2020-02-17 13:28:48 	./run-tests.py ap_add_with_driver 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_add_with_driver 1/1
Test: Add hostapd interface with driver specified
Connect STA wlan0 to AP
PASS ap_add_with_driver 0.37917 2020-02-17 13:28:48.665087
passed all 1 test case(s)
2020-02-17 13:28:48 	./run-tests.py ap_anqp_domain_id 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_anqp_domain_id 1/1
Test: ANQP Domain ID
Starting AP wlan3
Starting AP wlan4
PASS ap_anqp_domain_id 0.532422 2020-02-17 13:28:49.498824
passed all 1 test case(s)
2020-02-17 13:28:49 	./run-tests.py ap_anqp_no_sharing_diff_ess 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_anqp_no_sharing_diff_ess 1/1
Test: ANQP no sharing between ESSs
Starting AP wlan3
Starting AP wlan4
Normal network selection with shared ANQP results
PASS ap_anqp_no_sharing_diff_ess 0.666723 2020-02-17 13:28:50.484070
passed all 1 test case(s)
2020-02-17 13:28:50 	./run-tests.py ap_anqp_no_sharing_missing_info 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_anqp_no_sharing_missing_info 1/1
Test: ANQP no sharing due to missing information
Starting AP wlan3
Starting AP wlan4
Normal network selection with shared ANQP results
PASS ap_anqp_no_sharing_missing_info 0.633486 2020-02-17 13:28:51.450473
passed all 1 test case(s)
2020-02-17 13:28:51 	./run-tests.py ap_anqp_sharing 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_anqp_sharing 1/1
Test: ANQP sharing within ESS and explicit unshare
Starting AP wlan3
Starting AP wlan4
Normal network selection with shared ANQP results
Explicit ANQP request to unshare ANQP results
PASS ap_anqp_sharing 0.65668 2020-02-17 13:28:52.439247
passed all 1 test case(s)
2020-02-17 13:28:52 	./run-tests.py ap_anqp_sharing_oom 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_anqp_sharing_oom 1/1
Test: ANQP sharing within ESS and explicit unshare OOM
Starting AP wlan3
Starting AP wlan4
PASS ap_anqp_sharing_oom 0.548883 2020-02-17 13:28:53.312775
passed all 1 test case(s)
2020-02-17 13:28:53 	./run-tests.py ap_basic_rates 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_basic_rates 1/1
Test: Open AP with lots of basic rates
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_basic_rates 0.322545 2020-02-17 13:28:53.926174
passed all 1 test case(s)
2020-02-17 13:28:53 	./run-tests.py ap_beacon_rate_ht 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_beacon_rate_ht 1/1
Test: Open AP with Beacon frame TX rate HT-MCS 0
Starting AP wlan3
Skip test case: Setting Beacon frame TX rate not supported
SKIP ap_beacon_rate_ht 0.174968 2020-02-17 13:28:54.393421
passed all 0 test case(s)
skipped 1 test case(s)
2020-02-17 13:28:54 	./run-tests.py ap_beacon_rate_ht2 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_beacon_rate_ht2 1/1
Test: Open AP with Beacon frame TX rate HT-MCS 1 in VHT BSS
Starting AP wlan3
Skip test case: Setting Beacon frame TX rate not supported
SKIP ap_beacon_rate_ht2 0.172247 2020-02-17 13:28:54.855158
passed all 0 test case(s)
skipped 1 test case(s)
2020-02-17 13:28:54 	./run-tests.py ap_beacon_rate_legacy 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_beacon_rate_legacy 1/1
Test: Open AP with Beacon frame TX rate 5.5 Mbps
Starting AP wlan3
Skip test case: Setting Beacon frame TX rate not supported
SKIP ap_beacon_rate_legacy 0.187983 2020-02-17 13:28:55.352385
passed all 0 test case(s)
skipped 1 test case(s)
2020-02-17 13:28:55 	./run-tests.py ap_beacon_rate_legacy2 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_beacon_rate_legacy2 1/1
Test: Open AP with Beacon frame TX rate 12 Mbps in VHT BSS
Starting AP wlan3
Skip test case: Setting Beacon frame TX rate not supported
SKIP ap_beacon_rate_legacy2 0.171803 2020-02-17 13:28:55.818576
passed all 0 test case(s)
skipped 1 test case(s)
2020-02-17 13:28:55 	./run-tests.py ap_beacon_rate_vht 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_beacon_rate_vht 1/1
Test: Open AP with Beacon frame TX rate VHT-MCS 0
Starting AP wlan3
Skip test case: Setting Beacon frame TX rate not supported
SKIP ap_beacon_rate_vht 0.1707 2020-02-17 13:28:56.303706
passed all 0 test case(s)
skipped 1 test case(s)
2020-02-17 13:28:56 	./run-tests.py ap_bss_add_many 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_bss_add_many 1/1
Test: Large number of BSS add operations with hostapd
Starting BSS phy=phy3 ifname=wlan3
Starting BSS phy=phy3 ifname=wlan3-0
Starting BSS phy=phy3 ifname=wlan3-1
Starting BSS phy=phy3 ifname=wlan3-2
Starting BSS phy=phy3 ifname=wlan3-3
Starting BSS phy=phy3 ifname=wlan3-4
Starting BSS phy=phy3 ifname=wlan3-5
Starting BSS phy=phy3 ifname=wlan3-6
Starting BSS phy=phy3 ifname=wlan3-7
Starting BSS phy=phy3 ifname=wlan3-8
Starting BSS phy=phy3 ifname=wlan3-9
Starting BSS phy=phy3 ifname=wlan3-10
Starting BSS phy=phy3 ifname=wlan3-11
Starting BSS phy=phy3 ifname=wlan3-12
Starting BSS phy=phy3 ifname=wlan3-13
Starting BSS phy=phy3 ifname=wlan3-14
Starting BSS phy=phy3 ifname=wlan3-15
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Removing BSS wlan3-0
Connect STA wlan0 to AP
Removing BSS wlan3-1
Connect STA wlan0 to AP
Removing BSS wlan3-2
Connect STA wlan0 to AP
Removing BSS wlan3-3
Connect STA wlan0 to AP
Removing BSS wlan3-4
Connect STA wlan0 to AP
Removing BSS wlan3-5
Connect STA wlan0 to AP
Removing BSS wlan3-6
Connect STA wlan0 to AP
Removing BSS wlan3-7
Connect STA wlan0 to AP
Removing BSS wlan3-8
Connect STA wlan0 to AP
Removing BSS wlan3-9
Connect STA wlan0 to AP
Removing BSS wlan3-10
Connect STA wlan0 to AP
Removing BSS wlan3-11
Connect STA wlan0 to AP
Removing BSS wlan3-12
Connect STA wlan0 to AP
Removing BSS wlan3-13
Connect STA wlan0 to AP
Removing BSS wlan3-14
Connect STA wlan0 to AP
Removing BSS wlan3-15
PASS ap_bss_add_many 3.970912 2020-02-17 13:29:00.594651
passed all 1 test case(s)
2020-02-17 13:29:00 	./run-tests.py ap_bss_add_out_of_memory 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_bss_add_out_of_memory 1/1
Test: Running out of memory while adding a BSS
Starting AP wlan4
Starting BSS phy=phy3 ifname=wlan3
Starting BSS phy=phy3 ifname=wlan3-2
Removing BSS wlan3-2
Removing BSS wlan3
PASS ap_bss_add_out_of_memory 0.578217 2020-02-17 13:29:01.485828
passed all 1 test case(s)
2020-02-17 13:29:01 	./run-tests.py ap_bss_add_remove 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_bss_add_remove 1/1
Test: Dynamic BSS add/remove operations with hostapd
Set up three BSSes one by one
Starting BSS phy=phy3 ifname=wlan3
Connect STA wlan1 to AP
Connect STA wlan2 to AP
Connect STA wlan0 to AP
Starting BSS phy=phy3 ifname=wlan3-2
Connect STA wlan2 to AP
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Starting BSS phy=phy3 ifname=wlan3-3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
Remove the last BSS and re-add it
Removing BSS wlan3-3
Connect STA wlan2 to AP
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Starting BSS phy=phy3 ifname=wlan3-3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
Remove the middle BSS and re-add it
Removing BSS wlan3-2
Connect STA wlan1 to AP
Connect STA wlan0 to AP
Connect STA wlan2 to AP
Starting BSS phy=phy3 ifname=wlan3-2
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
Remove the first BSS and re-add it and other BSSs
Removing BSS wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
Starting BSS phy=phy3 ifname=wlan3
Starting BSS phy=phy3 ifname=wlan3-2
Starting BSS phy=phy3 ifname=wlan3-3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
Remove two BSSes and re-add them
Removing BSS wlan3-2
Connect STA wlan1 to AP
Connect STA wlan0 to AP
Connect STA wlan2 to AP
Removing BSS wlan3-3
Connect STA wlan1 to AP
Connect STA wlan2 to AP
Connect STA wlan0 to AP
Starting BSS phy=phy3 ifname=wlan3-2
Connect STA wlan2 to AP
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Starting BSS phy=phy3 ifname=wlan3-3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
Remove three BSSes in and re-add them
Removing BSS wlan3-3
Connect STA wlan2 to AP
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Removing BSS wlan3-2
Connect STA wlan1 to AP
Connect STA wlan2 to AP
Connect STA wlan0 to AP
Removing BSS wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
Starting BSS phy=phy3 ifname=wlan3
Connect STA wlan1 to AP
Connect STA wlan2 to AP
Connect STA wlan0 to AP
Starting BSS phy=phy3 ifname=wlan3-2
Connect STA wlan2 to AP
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Starting BSS phy=phy3 ifname=wlan3-3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
Test error handling if a duplicate ifname is tried
Starting BSS phy=phy3 ifname=wlan3-3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
PASS ap_bss_add_remove 10.44263 2020-02-17 13:29:12.223459
passed all 1 test case(s)
2020-02-17 13:29:12 	./run-tests.py ap_bss_add_remove_during_ht_scan 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_bss_add_remove_during_ht_scan 1/1
Test: Dynamic BSS add during HT40 co-ex scan
Starting BSS phy=phy3 ifname=wlan3
Starting BSS phy=phy3 ifname=wlan3-2
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Removing BSS wlan3-2
Removing BSS wlan3
Starting BSS phy=phy3 ifname=wlan3
Starting BSS phy=phy3 ifname=wlan3-2
Removing BSS wlan3-2
Connect STA wlan1 to AP
Connect STA wlan0 to AP
Removing BSS wlan3
Starting BSS phy=phy3 ifname=wlan3
Starting BSS phy=phy3 ifname=wlan3-2
Removing BSS wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
PASS ap_bss_add_remove_during_ht_scan 11.656546 2020-02-17 13:29:24.202424
passed all 1 test case(s)
2020-02-17 13:29:24 	./run-tests.py ap_bss_add_reuse_existing 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_bss_add_reuse_existing 1/1
Test: Dynamic BSS add operation reusing existing interface
Starting BSS phy=phy3 ifname=wlan3
Starting BSS phy=phy3 ifname=wlan3-2
Removing BSS wlan3-2
PASS ap_bss_add_reuse_existing 0.332208 2020-02-17 13:29:24.846067
passed all 1 test case(s)
2020-02-17 13:29:24 	./run-tests.py ap_bss_config_file 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_bss_config_file 1/1
Test: hostapd BSS config file
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
PASS ap_bss_config_file 0.905245 2020-02-17 13:29:26.044224
passed all 1 test case(s)
2020-02-17 13:29:26 	./run-tests.py ap_bss_load 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_bss_load 1/1
Test: AP with open mode (no security) configuration
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_bss_load 2.731117 2020-02-17 13:29:29.092136
passed all 1 test case(s)
2020-02-17 13:29:29 	./run-tests.py ap_bss_load_fail 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_bss_load_fail 1/1
Test: BSS Load update failing to get survey data
Starting AP wlan3
PASS ap_bss_load_fail 0.287733 2020-02-17 13:29:29.688927
passed all 1 test case(s)
2020-02-17 13:29:29 	./run-tests.py ap_change_ssid 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_change_ssid 1/1
Test: Dynamic SSID change with hostapd and WPA2-PSK
Starting AP wlan3
Connect STA wlan0 to AP
Change SSID dynamically
PASS ap_change_ssid 0.522996 2020-02-17 13:29:30.513595
passed all 1 test case(s)
2020-02-17 13:29:30 	./run-tests.py ap_cipher_bip 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_bip 1/1
Test: WPA2-PSK with BIP
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_bip 0.408233 2020-02-17 13:29:31.219645
passed all 1 test case(s)
2020-02-17 13:29:31 	./run-tests.py ap_cipher_bip_cmac_256 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_bip_cmac_256 1/1
Test: WPA2-PSK with BIP-CMAC-256
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_bip_cmac_256 0.4357 2020-02-17 13:29:31.951763
passed all 1 test case(s)
2020-02-17 13:29:31 	./run-tests.py ap_cipher_bip_cmac_256_req 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_bip_cmac_256_req 1/1
Test: WPA2-PSK with BIP-CMAC-256 required
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_bip_cmac_256_req 0.398667 2020-02-17 13:29:32.673820
passed all 1 test case(s)
2020-02-17 13:29:32 	./run-tests.py ap_cipher_bip_gmac_128 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_bip_gmac_128 1/1
Test: WPA2-PSK with BIP-GMAC-128
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_bip_gmac_128 0.450359 2020-02-17 13:29:33.425953
passed all 1 test case(s)
2020-02-17 13:29:33 	./run-tests.py ap_cipher_bip_gmac_128_req 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_bip_gmac_128_req 1/1
Test: WPA2-PSK with BIP-GMAC-128 required
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_bip_gmac_128_req 0.405284 2020-02-17 13:29:34.141070
passed all 1 test case(s)
2020-02-17 13:29:34 	./run-tests.py ap_cipher_bip_gmac_256 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_bip_gmac_256 1/1
Test: WPA2-PSK with BIP-GMAC-256
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_bip_gmac_256 0.4086 2020-02-17 13:29:34.857827
passed all 1 test case(s)
2020-02-17 13:29:34 	./run-tests.py ap_cipher_bip_gmac_256_req 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_bip_gmac_256_req 1/1
Test: WPA2-PSK with BIP-GMAC-256 required
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_bip_gmac_256_req 0.42458 2020-02-17 13:29:35.581016
passed all 1 test case(s)
2020-02-17 13:29:35 	./run-tests.py ap_cipher_bip_req 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_bip_req 1/1
Test: WPA2-PSK with BIP required
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_bip_req 0.409148 2020-02-17 13:29:36.279667
passed all 1 test case(s)
2020-02-17 13:29:36 	./run-tests.py ap_cipher_bip_req2 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_bip_req2 1/1
Test: WPA2-PSK with BIP required (2)
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_bip_req2 0.396543 2020-02-17 13:29:36.981903
passed all 1 test case(s)
2020-02-17 13:29:37 	./run-tests.py ap_cipher_bip_req_mismatch 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_bip_req_mismatch 1/1
Test: WPA2-PSK with BIP cipher mismatch
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_bip_req_mismatch 0.371945 2020-02-17 13:29:37.664532
passed all 1 test case(s)
2020-02-17 13:29:37 	./run-tests.py ap_cipher_ccmp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_ccmp 1/1
Test: WPA2-PSK/CCMP connection
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_ccmp 0.358173 2020-02-17 13:29:38.321684
passed all 1 test case(s)
2020-02-17 13:29:38 	./run-tests.py ap_cipher_ccmp_256 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_ccmp_256 1/1
Test: WPA2-PSK/CCMP-256 connection
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_ccmp_256 0.409998 2020-02-17 13:29:39.036079
passed all 1 test case(s)
2020-02-17 13:29:39 	./run-tests.py ap_cipher_gcmp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_gcmp 1/1
Test: WPA2-PSK/GCMP connection
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_gcmp 0.45747 2020-02-17 13:29:39.796221
passed all 1 test case(s)
2020-02-17 13:29:39 	./run-tests.py ap_cipher_gcmp_256 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_gcmp_256 1/1
Test: WPA2-PSK/GCMP-256 connection
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_gcmp_256 0.400645 2020-02-17 13:29:40.501374
passed all 1 test case(s)
2020-02-17 13:29:40 	./run-tests.py ap_cipher_gcmp_256_group_ccmp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_gcmp_256_group_ccmp 1/1
Test: WPA2-PSK/GCMP-256 connection with group cipher override CCMP
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_gcmp_256_group_ccmp 0.386482 2020-02-17 13:29:41.203627
passed all 1 test case(s)
2020-02-17 13:29:41 	./run-tests.py ap_cipher_gcmp_256_group_ccmp_256 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_gcmp_256_group_ccmp_256 1/1
Test: WPA2-PSK/GCMP-256 connection with group cipher override CCMP-256
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_gcmp_256_group_ccmp_256 0.384254 2020-02-17 13:29:41.896889
passed all 1 test case(s)
2020-02-17 13:29:41 	./run-tests.py ap_cipher_gcmp_256_group_gcmp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_gcmp_256_group_gcmp 1/1
Test: WPA2-PSK/GCMP-256 connection with group cipher override GCMP
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_gcmp_256_group_gcmp 0.408153 2020-02-17 13:29:42.614194
passed all 1 test case(s)
2020-02-17 13:29:42 	./run-tests.py ap_cipher_gcmp_256_group_gcmp_256 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_gcmp_256_group_gcmp_256 1/1
Test: WPA2-PSK/GCMP-256 connection with group cipher override GCMP-256
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_gcmp_256_group_gcmp_256 0.38318 2020-02-17 13:29:43.293553
passed all 1 test case(s)
2020-02-17 13:29:43 	./run-tests.py ap_cipher_gcmp_ccmp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_gcmp_ccmp 1/1
Test: WPA2-PSK/GCMP/CCMP ciphers
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
PASS ap_cipher_gcmp_ccmp 1.141559 2020-02-17 13:29:44.735606
passed all 1 test case(s)
2020-02-17 13:29:44 	./run-tests.py ap_cipher_mixed_wpa_wpa2 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_mixed_wpa_wpa2 1/1
Test: WPA2-PSK/CCMP/ and WPA-PSK/TKIP mixed configuration
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
PASS ap_cipher_mixed_wpa_wpa2 0.720961 2020-02-17 13:29:45.747745
passed all 1 test case(s)
2020-02-17 13:29:45 	./run-tests.py ap_cipher_replay_protection_ap_ccmp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_replay_protection_ap_ccmp 1/1
Test: CCMP replay protection on AP
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_replay_protection_ap_ccmp 1.619471 2020-02-17 13:29:47.687764
passed all 1 test case(s)
2020-02-17 13:29:47 	./run-tests.py ap_cipher_replay_protection_ap_gcmp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_replay_protection_ap_gcmp 1/1
Test: GCMP replay protection on AP
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_replay_protection_ap_gcmp 1.68062 2020-02-17 13:29:49.685158
passed all 1 test case(s)
2020-02-17 13:29:49 	./run-tests.py ap_cipher_replay_protection_ap_tkip 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_replay_protection_ap_tkip 1/1
Test: TKIP replay protection on AP
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_replay_protection_ap_tkip 1.663759 2020-02-17 13:29:51.664551
passed all 1 test case(s)
2020-02-17 13:29:51 	./run-tests.py ap_cipher_replay_protection_sta_ccmp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_replay_protection_sta_ccmp 1/1
Test: CCMP replay protection on STA (TK)
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_replay_protection_sta_ccmp 1.659305 2020-02-17 13:29:53.639151
passed all 1 test case(s)
2020-02-17 13:29:53 	./run-tests.py ap_cipher_replay_protection_sta_gcmp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_replay_protection_sta_gcmp 1/1
Test: GCMP replay protection on STA (TK)
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_replay_protection_sta_gcmp 1.660267 2020-02-17 13:29:55.618518
passed all 1 test case(s)
2020-02-17 13:29:55 	./run-tests.py ap_cipher_replay_protection_sta_gtk_ccmp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_replay_protection_sta_gtk_ccmp 1/1
Test: CCMP replay protection on STA (GTK)
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_replay_protection_sta_gtk_ccmp 1.685915 2020-02-17 13:29:57.636841
passed all 1 test case(s)
2020-02-17 13:29:57 	./run-tests.py ap_cipher_replay_protection_sta_gtk_gcmp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_replay_protection_sta_gtk_gcmp 1/1
Test: GCMP replay protection on STA (GTK)
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_replay_protection_sta_gtk_gcmp 1.6739 2020-02-17 13:29:59.622670
passed all 1 test case(s)
2020-02-17 13:29:59 	./run-tests.py ap_cipher_replay_protection_sta_gtk_tkip 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_replay_protection_sta_gtk_tkip 1/1
Test: TKIP replay protection on STA (GTK)
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_replay_protection_sta_gtk_tkip 1.665099 2020-02-17 13:30:01.596158
passed all 1 test case(s)
2020-02-17 13:30:01 	./run-tests.py ap_cipher_replay_protection_sta_tkip 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_replay_protection_sta_tkip 1/1
Test: TKIP replay protection on STA (TK)
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_replay_protection_sta_tkip 1.686798 2020-02-17 13:30:03.587935
passed all 1 test case(s)
2020-02-17 13:30:03 	./run-tests.py ap_cipher_tkip 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_tkip 1/1
Test: WPA2-PSK/TKIP connection
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_tkip 0.409917 2020-02-17 13:30:04.287092
passed all 1 test case(s)
2020-02-17 13:30:04 	./run-tests.py ap_cipher_tkip_countermeasures_ap 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_tkip_countermeasures_ap 1/1
Test: WPA-PSK/TKIP countermeasures (detected by AP)
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_tkip_countermeasures_ap 2.408641 2020-02-17 13:30:07.015898
passed all 1 test case(s)
2020-02-17 13:30:07 	./run-tests.py ap_cipher_tkip_countermeasures_ap_mixed_mode 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_tkip_countermeasures_ap_mixed_mode 1/1
Test: WPA+WPA2-PSK/TKIP countermeasures (detected by mixed mode AP)
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
PASS ap_cipher_tkip_countermeasures_ap_mixed_mode 3.564069 2020-02-17 13:30:10.898781
passed all 1 test case(s)
2020-02-17 13:30:10 	./run-tests.py ap_cipher_tkip_countermeasures_sta 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_tkip_countermeasures_sta 1/1
Test: WPA-PSK/TKIP countermeasures (detected by STA)
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cipher_tkip_countermeasures_sta 2.444407 2020-02-17 13:30:13.654673
passed all 1 test case(s)
2020-02-17 13:30:13 	./run-tests.py ap_cipher_tkip_countermeasures_sta2 --long
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cipher_tkip_countermeasures_sta2 1/1
Test: WPA-PSK/TKIP countermeasures (detected by two STAs) [long]
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Waiting for TKIP countermeasures to end
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
PASS ap_cipher_tkip_countermeasures_sta2 63.207889 2020-02-17 13:31:17.186404
passed all 1 test case(s)
2020-02-17 13:31:17 	./run-tests.py ap_cli_order 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_cli_order 1/1
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_cli_order 0.347846 2020-02-17 13:31:17.841475
passed all 1 test case(s)
2020-02-17 13:31:17 	./run-tests.py ap_config_eap_user_file_parsing 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_eap_user_file_parsing 1/1
Test: hostapd eap_user_file parsing
Starting AP wlan3
PASS ap_config_eap_user_file_parsing 0.212324 2020-02-17 13:31:18.360950
passed all 1 test case(s)
2020-02-17 13:31:18 	./run-tests.py ap_config_errors 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_errors 1/1
Test: Various hostapd configuration errors
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Removing BSS wlan3
Starting AP wlan3
Removing BSS wlan3
PASS ap_config_errors 0.09186 2020-02-17 13:31:18.761774
passed all 1 test case(s)
2020-02-17 13:31:18 	./run-tests.py ap_config_invalid_value 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_invalid_value 1/1
Test: Ignoring invalid hostapd configuration parameter updates
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_config_invalid_value 0.354727 2020-02-17 13:31:19.434445
passed all 1 test case(s)
2020-02-17 13:31:19 	./run-tests.py ap_config_reload 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_reload 1/1
Test: hostapd configuration reload
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_config_reload 0.448183 2020-02-17 13:31:20.199651
passed all 1 test case(s)
2020-02-17 13:31:20 	./run-tests.py ap_config_reload_before_enable 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_reload_before_enable 1/1
Test: hostapd configuration reload before enable
Starting interface wlan3
PASS ap_config_reload_before_enable 0.058753 2020-02-17 13:31:20.562020
passed all 1 test case(s)
2020-02-17 13:31:20 	./run-tests.py ap_config_reload_file 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_reload_file 1/1
Test: hostapd configuration reload from file
Starting interface wlan3
Connect STA wlan0 to AP
PASS ap_config_reload_file 0.457212 2020-02-17 13:31:21.321176
passed all 1 test case(s)
2020-02-17 13:31:21 	./run-tests.py ap_config_reload_file_while_disabled 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_reload_file_while_disabled 1/1
Test: hostapd configuration reload from file when disabled
Starting interface wlan3
Connect STA wlan0 to AP
PASS ap_config_reload_file_while_disabled 0.555972 2020-02-17 13:31:22.186706
passed all 1 test case(s)
2020-02-17 13:31:22 	./run-tests.py ap_config_reload_on_sighup 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_reload_on_sighup 1/1
Test: hostapd configuration reload modification from file on SIGHUP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
PASS ap_config_reload_on_sighup 0.767336 2020-02-17 13:31:23.262897
passed all 1 test case(s)
2020-02-17 13:31:23 	./run-tests.py ap_config_reload_on_sighup_bss_changes 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_reload_on_sighup_bss_changes 1/1
Test: hostapd configuration reload modification from file on SIGHUP with bss remove/add
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan1 to AP
PASS ap_config_reload_on_sighup_bss_changes 2.166533 2020-02-17 13:31:25.725686
passed all 1 test case(s)
2020-02-17 13:31:25 	./run-tests.py ap_config_reload_on_sighup_no_ht 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_reload_on_sighup_no_ht 1/1
Test: hostapd configuration reload modification from file on SIGHUP (no HT)
Connect STA wlan0 to AP
Connect STA wlan0 to AP
PASS ap_config_reload_on_sighup_no_ht 0.738313 2020-02-17 13:31:26.774396
passed all 1 test case(s)
2020-02-17 13:31:26 	./run-tests.py ap_config_set_errors 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_set_errors 1/1
Test: hostapd configuration parsing errors
Starting AP wlan3
hs20_conn_capab limit at 16380
PASS ap_config_set_errors 3.996885 2020-02-17 13:31:31.074095
passed all 1 test case(s)
2020-02-17 13:31:31 	./run-tests.py ap_config_set_oom 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_set_oom 1/1
Test: hostapd configuration parsing OOM
Starting AP wlan3
PASS ap_config_set_oom 0.234668 2020-02-17 13:31:31.623160
passed all 1 test case(s)
2020-02-17 13:31:31 	./run-tests.py ap_config_sigusr1 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_config_sigusr1 1/1
Test: hostapd SIGUSR1
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_config_sigusr1 0.34192 2020-02-17 13:31:32.269714
passed all 1 test case(s)
2020-02-17 13:31:32 	./run-tests.py ap_country 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_country 1/1
Test: WPA2-PSK AP setting country code and using 5 GHz band
Starting AP wlan3
Connect STA wlan0 to AP
wlan0: Country code not reset back to 00: is 98
Country code remains set - expect following test cases to fail
FAIL ap_country 5.52661 2020-02-17 13:31:38.094242
passed 0 test case(s)
skipped 0 test case(s)
failed tests: ap_country
wlan0: Country code not reset back to 00: is 98
Country code remains set - expect following test cases to fail
2020-02-17 13:31:38 	./run-tests.py ap_csa_1_switch 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
country=98 workaround - try to clear state
Connect STA wlan0 to AP
START ap_csa_1_switch 1/1
Test: AP Channel Switch, one switch
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_csa_1_switch 1.390709 2020-02-17 13:31:40.668531
passed all 1 test case(s)
2020-02-17 13:31:40 	./run-tests.py ap_csa_1_switch_count_0 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_csa_1_switch_count_0 1/1
Test: AP Channel Switch, one switch with count 0
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_csa_1_switch_count_0 0.41931 2020-02-17 13:31:41.392997
passed all 1 test case(s)
2020-02-17 13:31:41 	./run-tests.py ap_csa_1_switch_count_1 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_csa_1_switch_count_1 1/1
Test: AP Channel Switch, one switch with count 1
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_csa_1_switch_count_1 0.388462 2020-02-17 13:31:42.090211
passed all 1 test case(s)
2020-02-17 13:31:42 	./run-tests.py ap_csa_1_switch_count_2 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_csa_1_switch_count_2 1/1
Test: AP Channel Switch, one switch with count 2
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_csa_1_switch_count_2 0.536241 2020-02-17 13:31:42.931084
passed all 1 test case(s)
2020-02-17 13:31:42 	./run-tests.py ap_csa_2_switches 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_csa_2_switches 1/1
Test: AP Channel Switch, two switches
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_csa_2_switches 2.351628 2020-02-17 13:31:45.576375
passed all 1 test case(s)
2020-02-17 13:31:45 	./run-tests.py ap_csa_2_switches_count_0 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_csa_2_switches_count_0 1/1
Test: AP Channel Switch, two switches with count 0
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_csa_2_switches_count_0 0.396299 2020-02-17 13:31:46.274370
passed all 1 test case(s)
2020-02-17 13:31:46 	./run-tests.py ap_csa_2_switches_count_1 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_csa_2_switches_count_1 1/1
Test: AP Channel Switch, two switches with count 1
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_csa_2_switches_count_1 0.380469 2020-02-17 13:31:46.958519
passed all 1 test case(s)
2020-02-17 13:31:46 	./run-tests.py ap_csa_disable 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_csa_disable 1/1
Test: AP Channel Switch and DISABLE command before completion
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_csa_disable 0.806095 2020-02-17 13:31:48.068091
passed all 1 test case(s)
2020-02-17 13:31:48 	./run-tests.py ap_csa_ecsa_only 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ap_csa_ecsa_only 1/1
Test: AP Channel Switch, one switch with only ECSA IE
Starting AP wlan3
Connect STA wlan0 to AP
PASS ap_csa_ecsa_only 1.401331 2020-02-17 13:31:49.782876
passed all 1 test case(s)
2020-02-17 13:31:49 ./stop.sh
2020-02-17 13:31:51 ./start.sh channels=4
2020-02-17 13:31:51 ./stop.sh