lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200218171321.30990-3-robh@kernel.org>
Date:   Tue, 18 Feb 2020 11:13:12 -0600
From:   Rob Herring <robh@...nel.org>
To:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        soc@...nel.org, Andre Przywara <andre.przywara@....com>,
        Robert Richter <rrichter@...vell.com>,
        Jon Loeliger <jdl@....com>, Alexander Graf <graf@...zon.com>,
        Matthias Brugger <mbrugger@...e.com>,
        Mark Langsdorf <mlangsdo@...hat.com>
Cc:     Alex Williamson <alex.williamson@...hat.com>,
        Borislav Petkov <bp@...en8.de>,
        Cornelia Huck <cohuck@...hat.com>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        "David S. Miller" <davem@...emloft.net>,
        devicetree@...r.kernel.org, Eric Auger <eric.auger@...hat.com>,
        iommu@...ts.linux-foundation.org,
        James Morse <james.morse@....com>,
        Jens Axboe <axboe@...nel.dk>, Joerg Roedel <joro@...tes.org>,
        kvm@...r.kernel.org, linux-clk@...r.kernel.org,
        linux-edac@...r.kernel.org, linux-ide@...r.kernel.org,
        linux-pm@...r.kernel.org,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        netdev@...r.kernel.org, "Rafael J. Wysocki" <rjw@...ysocki.net>,
        Robin Murphy <robin.murphy@....com>,
        Stephen Boyd <sboyd@...nel.org>,
        Tony Luck <tony.luck@...el.com>,
        Viresh Kumar <viresh.kumar@...aro.org>,
        Will Deacon <will@...nel.org>
Subject: [RFC PATCH 02/11] ata: Remove Calxeda AHCI driver

Cc: Jens Axboe <axboe@...nel.dk>
Cc: linux-ide@...r.kernel.org
Signed-off-by: Rob Herring <robh@...nel.org>
---
Do not apply yet.

 drivers/ata/Kconfig         |   9 -
 drivers/ata/Makefile        |   1 -
 drivers/ata/sata_highbank.c | 635 ------------------------------------
 3 files changed, 645 deletions(-)
 delete mode 100644 drivers/ata/sata_highbank.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a6beb2c5a692..687ddd9f4188 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -395,15 +395,6 @@ config SATA_DWC_VDEBUG
 	help
 	  This option enables the taskfile dumping and NCQ debugging.

-config SATA_HIGHBANK
-	tristate "Calxeda Highbank SATA support"
-	depends on ARCH_HIGHBANK || COMPILE_TEST
-	help
-	  This option enables support for the Calxeda Highbank SoC's
-	  onboard SATA.
-
-	  If unsure, say N.
-
 config SATA_MV
 	tristate "Marvell SATA support"
 	depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index d8cc2e04a6c7..08f26d674ed7 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_SATA_GEMINI)	+= sata_gemini.o
 obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
 obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
 obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
-obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
 obj-$(CONFIG_AHCI_BRCM)		+= ahci_brcm.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_CEVA)		+= ahci_ceva.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
deleted file mode 100644
index ad3893c62572..000000000000
--- a/drivers/ata/sata_highbank.c
+++ /dev/null
@@ -1,635 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Calxeda Highbank AHCI SATA platform driver
- * Copyright 2012 Calxeda, Inc.
- *
- * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
- */
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/device.h>
-#include <linux/of_device.h>
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-#include <linux/libata.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/gpio/consumer.h>
-
-#include "ahci.h"
-
-#define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f))
-#define CPHY_ADDR(addr) (((addr) & 0x1ff) << 2)
-#define SERDES_CR_CTL			0x80a0
-#define SERDES_CR_ADDR			0x80a1
-#define SERDES_CR_DATA			0x80a2
-#define CR_BUSY				0x0001
-#define CR_START			0x0001
-#define CR_WR_RDN			0x0002
-#define CPHY_TX_INPUT_STS		0x2001
-#define CPHY_RX_INPUT_STS		0x2002
-#define CPHY_SATA_TX_OVERRIDE		0x8000
-#define CPHY_SATA_RX_OVERRIDE	 	0x4000
-#define CPHY_TX_OVERRIDE		0x2004
-#define CPHY_RX_OVERRIDE		0x2005
-#define SPHY_LANE			0x100
-#define SPHY_HALF_RATE			0x0001
-#define CPHY_SATA_DPLL_MODE		0x0700
-#define CPHY_SATA_DPLL_SHIFT		8
-#define CPHY_SATA_DPLL_RESET		(1 << 11)
-#define CPHY_SATA_TX_ATTEN		0x1c00
-#define CPHY_SATA_TX_ATTEN_SHIFT	10
-#define CPHY_PHY_COUNT			6
-#define CPHY_LANE_COUNT			4
-#define CPHY_PORT_COUNT			(CPHY_PHY_COUNT * CPHY_LANE_COUNT)
-
-static DEFINE_SPINLOCK(cphy_lock);
-/* Each of the 6 phys can have up to 4 sata ports attached to i. Map 0-based
- * sata ports to their phys and then to their lanes within the phys
- */
-struct phy_lane_info {
-	void __iomem *phy_base;
-	u8 lane_mapping;
-	u8 phy_devs;
-	u8 tx_atten;
-};
-static struct phy_lane_info port_data[CPHY_PORT_COUNT];
-
-static DEFINE_SPINLOCK(sgpio_lock);
-#define SCLOCK				0
-#define SLOAD				1
-#define SDATA				2
-#define SGPIO_PINS			3
-#define SGPIO_PORTS			8
-
-struct ecx_plat_data {
-	u32		n_ports;
-	/* number of extra clocks that the SGPIO PIC controller expects */
-	u32		pre_clocks;
-	u32		post_clocks;
-	struct gpio_desc *sgpio_gpiod[SGPIO_PINS];
-	u32		sgpio_pattern;
-	u32		port_to_sgpio[SGPIO_PORTS];
-};
-
-#define SGPIO_SIGNALS			3
-#define ECX_ACTIVITY_BITS		0x300000
-#define ECX_ACTIVITY_SHIFT		0
-#define ECX_LOCATE_BITS			0x80000
-#define ECX_LOCATE_SHIFT		1
-#define ECX_FAULT_BITS			0x400000
-#define ECX_FAULT_SHIFT			2
-static inline int sgpio_bit_shift(struct ecx_plat_data *pdata, u32 port,
-				u32 shift)
-{
-	return 1 << (3 * pdata->port_to_sgpio[port] + shift);
-}
-
-static void ecx_parse_sgpio(struct ecx_plat_data *pdata, u32 port, u32 state)
-{
-	if (state & ECX_ACTIVITY_BITS)
-		pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port,
-						ECX_ACTIVITY_SHIFT);
-	else
-		pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port,
-						ECX_ACTIVITY_SHIFT);
-	if (state & ECX_LOCATE_BITS)
-		pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port,
-						ECX_LOCATE_SHIFT);
-	else
-		pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port,
-						ECX_LOCATE_SHIFT);
-	if (state & ECX_FAULT_BITS)
-		pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port,
-						ECX_FAULT_SHIFT);
-	else
-		pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port,
-						ECX_FAULT_SHIFT);
-}
-
-/*
- * Tell the LED controller that the signal has changed by raising the clock
- * line for 50 uS and then lowering it for 50 uS.
- */
-static void ecx_led_cycle_clock(struct ecx_plat_data *pdata)
-{
-	gpiod_set_value(pdata->sgpio_gpiod[SCLOCK], 1);
-	udelay(50);
-	gpiod_set_value(pdata->sgpio_gpiod[SCLOCK], 0);
-	udelay(50);
-}
-
-static ssize_t ecx_transmit_led_message(struct ata_port *ap, u32 state,
-					ssize_t size)
-{
-	struct ahci_host_priv *hpriv =  ap->host->private_data;
-	struct ecx_plat_data *pdata = hpriv->plat_data;
-	struct ahci_port_priv *pp = ap->private_data;
-	unsigned long flags;
-	int pmp, i;
-	struct ahci_em_priv *emp;
-	u32 sgpio_out;
-
-	/* get the slot number from the message */
-	pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
-	if (pmp < EM_MAX_SLOTS)
-		emp = &pp->em_priv[pmp];
-	else
-		return -EINVAL;
-
-	if (!(hpriv->em_msg_type & EM_MSG_TYPE_LED))
-		return size;
-
-	spin_lock_irqsave(&sgpio_lock, flags);
-	ecx_parse_sgpio(pdata, ap->port_no, state);
-	sgpio_out = pdata->sgpio_pattern;
-	for (i = 0; i < pdata->pre_clocks; i++)
-		ecx_led_cycle_clock(pdata);
-
-	gpiod_set_value(pdata->sgpio_gpiod[SLOAD], 1);
-	ecx_led_cycle_clock(pdata);
-	gpiod_set_value(pdata->sgpio_gpiod[SLOAD], 0);
-	/*
-	 * bit-bang out the SGPIO pattern, by consuming a bit and then
-	 * clocking it out.
-	 */
-	for (i = 0; i < (SGPIO_SIGNALS * pdata->n_ports); i++) {
-		gpiod_set_value(pdata->sgpio_gpiod[SDATA], sgpio_out & 1);
-		sgpio_out >>= 1;
-		ecx_led_cycle_clock(pdata);
-	}
-	for (i = 0; i < pdata->post_clocks; i++)
-		ecx_led_cycle_clock(pdata);
-
-	/* save off new led state for port/slot */
-	emp->led_state = state;
-
-	spin_unlock_irqrestore(&sgpio_lock, flags);
-	return size;
-}
-
-static void highbank_set_em_messages(struct device *dev,
-					struct ahci_host_priv *hpriv,
-					struct ata_port_info *pi)
-{
-	struct device_node *np = dev->of_node;
-	struct ecx_plat_data *pdata = hpriv->plat_data;
-	int i;
-
-	for (i = 0; i < SGPIO_PINS; i++) {
-		struct gpio_desc *gpiod;
-
-		gpiod = devm_gpiod_get_index(dev, "calxeda,sgpio", i,
-					     GPIOD_OUT_HIGH);
-		if (IS_ERR(gpiod)) {
-			dev_err(dev, "failed to get GPIO %d\n", i);
-			continue;
-		}
-		gpiod_set_consumer_name(gpiod, "CX SGPIO");
-
-		pdata->sgpio_gpiod[i] = gpiod;
-	}
-	of_property_read_u32_array(np, "calxeda,led-order",
-						pdata->port_to_sgpio,
-						pdata->n_ports);
-	if (of_property_read_u32(np, "calxeda,pre-clocks", &pdata->pre_clocks))
-		pdata->pre_clocks = 0;
-	if (of_property_read_u32(np, "calxeda,post-clocks",
-				&pdata->post_clocks))
-		pdata->post_clocks = 0;
-
-	/* store em_loc */
-	hpriv->em_loc = 0;
-	hpriv->em_buf_sz = 4;
-	hpriv->em_msg_type = EM_MSG_TYPE_LED;
-	pi->flags |= ATA_FLAG_EM | ATA_FLAG_SW_ACTIVITY;
-}
-
-static u32 __combo_phy_reg_read(u8 sata_port, u32 addr)
-{
-	u32 data;
-	u8 dev = port_data[sata_port].phy_devs;
-	spin_lock(&cphy_lock);
-	writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
-	data = readl(port_data[sata_port].phy_base + CPHY_ADDR(addr));
-	spin_unlock(&cphy_lock);
-	return data;
-}
-
-static void __combo_phy_reg_write(u8 sata_port, u32 addr, u32 data)
-{
-	u8 dev = port_data[sata_port].phy_devs;
-	spin_lock(&cphy_lock);
-	writel(CPHY_MAP(dev, addr), port_data[sata_port].phy_base + 0x800);
-	writel(data, port_data[sata_port].phy_base + CPHY_ADDR(addr));
-	spin_unlock(&cphy_lock);
-}
-
-static void combo_phy_wait_for_ready(u8 sata_port)
-{
-	while (__combo_phy_reg_read(sata_port, SERDES_CR_CTL) & CR_BUSY)
-		udelay(5);
-}
-
-static u32 combo_phy_read(u8 sata_port, u32 addr)
-{
-	combo_phy_wait_for_ready(sata_port);
-	__combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
-	__combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_START);
-	combo_phy_wait_for_ready(sata_port);
-	return __combo_phy_reg_read(sata_port, SERDES_CR_DATA);
-}
-
-static void combo_phy_write(u8 sata_port, u32 addr, u32 data)
-{
-	combo_phy_wait_for_ready(sata_port);
-	__combo_phy_reg_write(sata_port, SERDES_CR_ADDR, addr);
-	__combo_phy_reg_write(sata_port, SERDES_CR_DATA, data);
-	__combo_phy_reg_write(sata_port, SERDES_CR_CTL, CR_WR_RDN | CR_START);
-}
-
-static void highbank_cphy_disable_overrides(u8 sata_port)
-{
-	u8 lane = port_data[sata_port].lane_mapping;
-	u32 tmp;
-	if (unlikely(port_data[sata_port].phy_base == NULL))
-		return;
-	tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
-	tmp &= ~CPHY_SATA_RX_OVERRIDE;
-	combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
-}
-
-static void cphy_override_tx_attenuation(u8 sata_port, u32 val)
-{
-	u8 lane = port_data[sata_port].lane_mapping;
-	u32 tmp;
-
-	if (val & 0x8)
-		return;
-
-	tmp = combo_phy_read(sata_port, CPHY_TX_INPUT_STS + lane * SPHY_LANE);
-	tmp &= ~CPHY_SATA_TX_OVERRIDE;
-	combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp);
-
-	tmp |= CPHY_SATA_TX_OVERRIDE;
-	combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp);
-
-	tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN;
-	combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp);
-}
-
-static void cphy_override_rx_mode(u8 sata_port, u32 val)
-{
-	u8 lane = port_data[sata_port].lane_mapping;
-	u32 tmp;
-	tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
-	tmp &= ~CPHY_SATA_RX_OVERRIDE;
-	combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
-
-	tmp |= CPHY_SATA_RX_OVERRIDE;
-	combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
-
-	tmp &= ~CPHY_SATA_DPLL_MODE;
-	tmp |= val << CPHY_SATA_DPLL_SHIFT;
-	combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
-
-	tmp |= CPHY_SATA_DPLL_RESET;
-	combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
-
-	tmp &= ~CPHY_SATA_DPLL_RESET;
-	combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp);
-
-	msleep(15);
-}
-
-static void highbank_cphy_override_lane(u8 sata_port)
-{
-	u8 lane = port_data[sata_port].lane_mapping;
-	u32 tmp, k = 0;
-
-	if (unlikely(port_data[sata_port].phy_base == NULL))
-		return;
-	do {
-		tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS +
-						lane * SPHY_LANE);
-	} while ((tmp & SPHY_HALF_RATE) && (k++ < 1000));
-	cphy_override_rx_mode(sata_port, 3);
-	cphy_override_tx_attenuation(sata_port, port_data[sata_port].tx_atten);
-}
-
-static int highbank_initialize_phys(struct device *dev, void __iomem *addr)
-{
-	struct device_node *sata_node = dev->of_node;
-	int phy_count = 0, phy, port = 0, i;
-	void __iomem *cphy_base[CPHY_PHY_COUNT] = {};
-	struct device_node *phy_nodes[CPHY_PHY_COUNT] = {};
-	u32 tx_atten[CPHY_PORT_COUNT] = {};
-
-	memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT);
-
-	do {
-		u32 tmp;
-		struct of_phandle_args phy_data;
-		if (of_parse_phandle_with_args(sata_node,
-				"calxeda,port-phys", "#phy-cells",
-				port, &phy_data))
-			break;
-		for (phy = 0; phy < phy_count; phy++) {
-			if (phy_nodes[phy] == phy_data.np)
-				break;
-		}
-		if (phy_nodes[phy] == NULL) {
-			phy_nodes[phy] = phy_data.np;
-			cphy_base[phy] = of_iomap(phy_nodes[phy], 0);
-			if (cphy_base[phy] == NULL) {
-				return 0;
-			}
-			phy_count += 1;
-		}
-		port_data[port].lane_mapping = phy_data.args[0];
-		of_property_read_u32(phy_nodes[phy], "phydev", &tmp);
-		port_data[port].phy_devs = tmp;
-		port_data[port].phy_base = cphy_base[phy];
-		of_node_put(phy_data.np);
-		port += 1;
-	} while (port < CPHY_PORT_COUNT);
-	of_property_read_u32_array(sata_node, "calxeda,tx-atten",
-				tx_atten, port);
-	for (i = 0; i < port; i++)
-		port_data[i].tx_atten = (u8) tx_atten[i];
-	return 0;
-}
-
-/*
- * The Calxeda SATA phy intermittently fails to bring up a link with Gen3
- * Retrying the phy hard reset can work around the issue, but the drive
- * may fail again. In less than 150 out of 15000 test runs, it took more
- * than 10 tries for the link to be established (but never more than 35).
- * Triple the maximum observed retry count to provide plenty of margin for
- * rare events and to guarantee that the link is established.
- *
- * Also, the default 2 second time-out on a failed drive is too long in
- * this situation. The uboot implementation of the same driver function
- * uses a much shorter time-out period and never experiences a time out
- * issue. Reducing the time-out to 500ms improves the responsiveness.
- * The other timing constants were kept the same as the stock AHCI driver.
- * This change was also tested 15000 times on 24 drives and none of them
- * experienced a time out.
- */
-static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
-				unsigned long deadline)
-{
-	static const unsigned long timing[] = { 5, 100, 500};
-	struct ata_port *ap = link->ap;
-	struct ahci_port_priv *pp = ap->private_data;
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
-	struct ata_taskfile tf;
-	bool online;
-	u32 sstatus;
-	int rc;
-	int retry = 100;
-
-	hpriv->stop_engine(ap);
-
-	/* clear D2H reception area to properly wait for D2H FIS */
-	ata_tf_init(link->device, &tf);
-	tf.command = ATA_BUSY;
-	ata_tf_to_fis(&tf, 0, 0, d2h_fis);
-
-	do {
-		highbank_cphy_disable_overrides(link->ap->port_no);
-		rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
-		highbank_cphy_override_lane(link->ap->port_no);
-
-		/* If the status is 1, we are connected, but the link did not
-		 * come up. So retry resetting the link again.
-		 */
-		if (sata_scr_read(link, SCR_STATUS, &sstatus))
-			break;
-		if (!(sstatus & 0x3))
-			break;
-	} while (!online && retry--);
-
-	hpriv->start_engine(ap);
-
-	if (online)
-		*class = ahci_dev_classify(ap);
-
-	return rc;
-}
-
-static struct ata_port_operations ahci_highbank_ops = {
-	.inherits		= &ahci_ops,
-	.hardreset		= ahci_highbank_hardreset,
-	.transmit_led_message   = ecx_transmit_led_message,
-};
-
-static const struct ata_port_info ahci_highbank_port_info = {
-	.flags          = AHCI_FLAG_COMMON,
-	.pio_mask       = ATA_PIO4,
-	.udma_mask      = ATA_UDMA6,
-	.port_ops       = &ahci_highbank_ops,
-};
-
-static struct scsi_host_template ahci_highbank_platform_sht = {
-	AHCI_SHT("sata_highbank"),
-};
-
-static const struct of_device_id ahci_of_match[] = {
-	{ .compatible = "calxeda,hb-ahci" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, ahci_of_match);
-
-static int ahci_highbank_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct ahci_host_priv *hpriv;
-	struct ecx_plat_data *pdata;
-	struct ata_host *host;
-	struct resource *mem;
-	int irq;
-	int i;
-	int rc;
-	u32 n_ports;
-	struct ata_port_info pi = ahci_highbank_port_info;
-	const struct ata_port_info *ppi[] = { &pi, NULL };
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(dev, "no mmio space\n");
-		return -EINVAL;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
-		dev_err(dev, "no irq\n");
-		return -EINVAL;
-	}
-
-	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
-	if (!hpriv) {
-		dev_err(dev, "can't alloc ahci_host_priv\n");
-		return -ENOMEM;
-	}
-	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata) {
-		dev_err(dev, "can't alloc ecx_plat_data\n");
-		return -ENOMEM;
-	}
-
-	hpriv->irq = irq;
-	hpriv->flags |= (unsigned long)pi.private_data;
-
-	hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
-	if (!hpriv->mmio) {
-		dev_err(dev, "can't map %pR\n", mem);
-		return -ENOMEM;
-	}
-
-	rc = highbank_initialize_phys(dev, hpriv->mmio);
-	if (rc)
-		return rc;
-
-
-	ahci_save_initial_config(dev, hpriv);
-
-	/* prepare host */
-	if (hpriv->cap & HOST_CAP_NCQ)
-		pi.flags |= ATA_FLAG_NCQ;
-
-	if (hpriv->cap & HOST_CAP_PMP)
-		pi.flags |= ATA_FLAG_PMP;
-
-	if (hpriv->cap & HOST_CAP_64)
-		dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
-
-	/* CAP.NP sometimes indicate the index of the last enabled
-	 * port, at other times, that of the last possible port, so
-	 * determining the maximum port number requires looking at
-	 * both CAP.NP and port_map.
-	 */
-	n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
-
-	pdata->n_ports = n_ports;
-	hpriv->plat_data = pdata;
-	highbank_set_em_messages(dev, hpriv, &pi);
-
-	host = ata_host_alloc_pinfo(dev, ppi, n_ports);
-	if (!host) {
-		rc = -ENOMEM;
-		goto err0;
-	}
-
-	host->private_data = hpriv;
-
-	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
-		host->flags |= ATA_HOST_PARALLEL_SCAN;
-
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-
-		ata_port_desc(ap, "mmio %pR", mem);
-		ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
-
-		/* set enclosure management message type */
-		if (ap->flags & ATA_FLAG_EM)
-			ap->em_message_type = hpriv->em_msg_type;
-
-		/* disabled/not-implemented port */
-		if (!(hpriv->port_map & (1 << i)))
-			ap->ops = &ata_dummy_port_ops;
-	}
-
-	rc = ahci_reset_controller(host);
-	if (rc)
-		goto err0;
-
-	ahci_init_controller(host);
-	ahci_print_info(host, "platform");
-
-	rc = ahci_host_activate(host, &ahci_highbank_platform_sht);
-	if (rc)
-		goto err0;
-
-	return 0;
-err0:
-	return rc;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int ahci_highbank_suspend(struct device *dev)
-{
-	struct ata_host *host = dev_get_drvdata(dev);
-	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = hpriv->mmio;
-	u32 ctl;
-	int rc;
-
-	if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
-		dev_err(dev, "firmware update required for suspend/resume\n");
-		return -EIO;
-	}
-
-	/*
-	 * AHCI spec rev1.1 section 8.3.3:
-	 * Software must disable interrupts prior to requesting a
-	 * transition of the HBA to D3 state.
-	 */
-	ctl = readl(mmio + HOST_CTL);
-	ctl &= ~HOST_IRQ_EN;
-	writel(ctl, mmio + HOST_CTL);
-	readl(mmio + HOST_CTL); /* flush */
-
-	rc = ata_host_suspend(host, PMSG_SUSPEND);
-	if (rc)
-		return rc;
-
-	return 0;
-}
-
-static int ahci_highbank_resume(struct device *dev)
-{
-	struct ata_host *host = dev_get_drvdata(dev);
-	int rc;
-
-	if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
-		rc = ahci_reset_controller(host);
-		if (rc)
-			return rc;
-
-		ahci_init_controller(host);
-	}
-
-	ata_host_resume(host);
-
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops,
-		  ahci_highbank_suspend, ahci_highbank_resume);
-
-static struct platform_driver ahci_highbank_driver = {
-	.remove = ata_platform_remove_one,
-        .driver = {
-                .name = "highbank-ahci",
-                .of_match_table = ahci_of_match,
-                .pm = &ahci_highbank_pm_ops,
-        },
-	.probe = ahci_highbank_probe,
-};
-
-module_platform_driver(ahci_highbank_driver);
-
-MODULE_DESCRIPTION("Calxeda Highbank AHCI SATA platform driver");
-MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@...xeda.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("sata:highbank");
--
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ