[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a131f52c0270067e7e3ab97ac44d1fb6a65ecbb0.camel@alliedtelesis.co.nz>
Date: Tue, 18 Feb 2020 00:43:22 +0000
From: Chris Packham <Chris.Packham@...iedtelesis.co.nz>
To: "linux@...ck-us.net" <linux@...ck-us.net>,
"mark.rutland@....com" <mark.rutland@....com>,
"jdelvare@...e.com" <jdelvare@...e.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>
CC: Logan Shaw <Logan.Shaw@...iedtelesis.co.nz>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-hwmon@...r.kernel.org" <linux-hwmon@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: Re: [PATCH 0/5] hwmon: (adt7475) attenuator bypass and pwm invert
On Mon, 2020-02-17 at 16:32 -0800, Guenter Roeck wrote:
> On 2/17/20 3:46 PM, Chris Packham wrote:
> > I've picked up Logan's changes[1] and am combining them with an old series of
> > mine[2] to hopefully get them both over the line.
> >
>
> No change log and/or history, so I guess your expectation is that it will be up
> to me to figure out what may have changed and if previous comments have been
> addressed or not.
>
> Guenter
Yeah sorry about that. I got as far as "is this v3 of Logan's series or
v1 of a new series" and jumped the gun.
Changes since Logan's series.
- Move existing dt-binding in patch 1/5.
- New dt-bindings in patch 2/5 and 3/5
- Patch 4/5:
-- move config2 to struct adt7475_data
-- set_property_bit() new helper function to set/clear bit based on dt
property value.
-- rename to use load_attenuators()
- Patch 5/5 rework older patch on top of this series.
>
> > This series updates the binding documentation for the adt7475 and adds two new
> > sets of properties.
> >
> > [1] - https://lore.kernel.org/linux-hwmon/20191219033213.30364-1-logan.shaw@alliedtelesis.co.nz/
> > [2] - https://lore.kernel.org/linux-hwmon/20181107040010.27436-1-chris.packham@alliedtelesis.co.nz/
> >
> > Chris Packham (2):
> > dt-bindings: hwmon: Document adt7475 invert-pwm property
> > hwmon: (adt7475) Add support for inverting pwm output
> >
> > Logan Shaw (3):
> > dt-bindings: hwmon: Document adt7475 binding
> > dt-bindings: hwmon: Document adt7475 bypass-attenuator property
> > hwmon: (adt7475) Add attenuator bypass support
> >
> > .../devicetree/bindings/hwmon/adt7475.yaml | 82 ++++++++++++++
> > .../devicetree/bindings/trivial-devices.yaml | 8 --
> > drivers/hwmon/adt7475.c | 100 +++++++++++++++++-
> > 3 files changed, 179 insertions(+), 11 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/hwmon/adt7475.yaml
> >
>
>
Powered by blists - more mailing lists