lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 19 Feb 2020 12:00:48 -0800 From: Florian Fainelli <f.fainelli@...il.com> To: netdev@...r.kernel.org Cc: Florian Fainelli <f.fainelli@...il.com>, Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>, Russell King <linux@...linux.org.uk>, "David S. Miller" <davem@...emloft.net>, linux-kernel@...r.kernel.org (open list) Subject: [PATCH net-next v2 2/3] net: phy: broadcom: Have bcm54xx_adjust_rxrefclk() check for flags bcm54xx_adjust_rxrefclk() already checks for PHY_BRCM_AUTO_PWRDWN_ENABLE and PHY_BRCM_DIS_TXCRXC_NOENRGY in order to set the appropriate bit. The situation is a bit more complicated with the flag PHY_BRCM_RX_REFCLK_UNUSED but essentially amounts to the same situation. The default setting for the 125MHz clock is to be on for all PHYs and we still treat BCM50610 and BCM50610M specifically with the polarity of the bit reversed. Signed-off-by: Florian Fainelli <f.fainelli@...il.com> --- drivers/net/phy/broadcom.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 4ad2128cc454..b4eae84a9195 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -273,10 +273,7 @@ static int bcm54xx_config_init(struct phy_device *phydev) (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE)) bcm_phy_write_shadow(phydev, BCM54XX_SHD_RGMII_MODE, 0); - if ((phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) || - (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) || - (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE)) - bcm54xx_adjust_rxrefclk(phydev); + bcm54xx_adjust_rxrefclk(phydev); if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E) { err = bcm54210e_config_init(phydev); -- 2.17.1
Powered by blists - more mailing lists