[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200220175911.GA19352@xps15>
Date: Thu, 20 Feb 2020 10:59:11 -0700
From: Mathieu Poirier <mathieu.poirier@...aro.org>
To: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Ohad Ben-Cohen <ohad@...ery.com>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Andy Gross <agross@...nel.org>, linux-arm-msm@...r.kernel.org,
linux-remoteproc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Sibi Sankar <sibis@...eaurora.org>,
Rishabh Bhatnagar <rishabhb@...eaurora.org>
Subject: Re: [PATCH v3 1/8] dt-bindings: remoteproc: Add Qualcomm PIL info
binding
On Mon, Feb 10, 2020 at 04:50:52PM -0800, Bjorn Andersson wrote:
> Add a devicetree binding for the Qualcomm periperal image loader
s/periperal/peripheral
> relocation info region found in the IMEM.
s/info/information
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> ---
>
> Changes since v2:
> - Replaced offset with reg to describe the region of IMEM used for the entries
>
> .../bindings/remoteproc/qcom,pil-info.yaml | 42 +++++++++++++++++++
> 1 file changed, 42 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> new file mode 100644
> index 000000000000..8386a4da6030
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
> @@ -0,0 +1,42 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm peripheral image loader relocation info binding
> +
> +maintainers:
> + - Bjorn Andersson <bjorn.andersson@...aro.org>
> +
> +description:
> + This document defines the binding for describing the Qualcomm peripheral
> + image loader relocation memory region, in IMEM, which is used for post mortem
> + debugging of remoteprocs.
> +
> +properties:
> + compatible:
> + const: qcom,pil-reloc-info
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +examples:
> + - |
> + imem@...bf000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0 0x146bf000 0 0x1000>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + pil-reloc {
> + compatible ="qcom,pil-reloc-info";
s/="/= "
> + reg = <0x94c 200>;
> + };
> + };
> +...
> --
> 2.24.0
>
Powered by blists - more mailing lists