| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200221222711.15973-1-robh@kernel.org>
Date: Fri, 21 Feb 2020 16:27:10 -0600
From: Rob Herring <robh@...nel.org>
To: devicetree@...r.kernel.org
Cc: linux-kernel@...r.kernel.org,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
Stephen Boyd <sboyd@...nel.org>,
Maxime Ripard <mripard@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>, Vinod Koul <vkoul@...nel.org>,
Jonathan Cameron <jic23@...nel.org>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Lee Jones <lee.jones@...aro.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Kishon Vijay Abraham I <kishon@...com>,
Linus Walleij <linus.walleij@...aro.org>,
Mark Brown <broonie@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>
Subject: [PATCH] dt-bindings: Fix dtc warnings in examples
Fix all the warnings in the DT binding schema examples when built with
'W=1'. This is in preparation to make that the default for examples.
Cc: Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: Alexandre Torgue <alexandre.torgue@...com>
Cc: Stephen Boyd <sboyd@...nel.org>
Cc: Maxime Ripard <mripard@...nel.org>
Cc: Chen-Yu Tsai <wens@...e.org>
Cc: Thierry Reding <thierry.reding@...il.com>
Cc: Sam Ravnborg <sam@...nborg.org>
Cc: Vinod Koul <vkoul@...nel.org>
Cc: Jonathan Cameron <jic23@...nel.org>
Cc: Kukjin Kim <kgene@...nel.org>
Cc: Krzysztof Kozlowski <krzk@...nel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: Bartosz Golaszewski <bgolaszewski@...libre.com>
Cc: Lee Jones <lee.jones@...aro.org>
Cc: Ulf Hansson <ulf.hansson@...aro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Cc: Kishon Vijay Abraham I <kishon@...com>
Cc: Linus Walleij <linus.walleij@...aro.org>
Cc: Mark Brown <broonie@...nel.org>
Cc: Daniel Lezcano <daniel.lezcano@...aro.org>
Signed-off-by: Rob Herring <robh@...nel.org>
---
.../devicetree/bindings/arm/stm32/st,mlahb.yaml | 2 +-
.../clock/allwinner,sun4i-a10-osc-clk.yaml | 2 +-
.../bindings/clock/allwinner,sun9i-a80-gt-clk.yaml | 2 +-
.../display/allwinner,sun4i-a10-tv-encoder.yaml | 6 +-----
.../bindings/display/bridge/anx6345.yaml | 10 ++--------
.../display/panel/leadtek,ltk500hd1829.yaml | 2 ++
.../bindings/display/panel/xinpeng,xpp055c272.yaml | 2 ++
.../bindings/display/simple-framebuffer.yaml | 6 +-----
.../devicetree/bindings/dma/ti/k3-udma.yaml | 14 +-------------
.../devicetree/bindings/gpu/arm,mali-bifrost.yaml | 14 +++++++-------
.../devicetree/bindings/gpu/arm,mali-midgard.yaml | 14 +++++++-------
.../bindings/iio/adc/samsung,exynos-adc.yaml | 2 +-
.../bindings/input/touchscreen/goodix.yaml | 2 +-
.../devicetree/bindings/media/ti,cal.yaml | 2 +-
.../devicetree/bindings/mfd/max77650.yaml | 4 ++--
.../devicetree/bindings/mmc/mmc-controller.yaml | 1 +
Documentation/devicetree/bindings/nvmem/nvmem.yaml | 2 ++
.../bindings/phy/allwinner,sun4i-a10-usb-phy.yaml | 2 +-
.../bindings/pinctrl/st,stm32-pinctrl.yaml | 2 +-
.../devicetree/bindings/regulator/regulator.yaml | 2 +-
.../sram/allwinner,sun4i-a10-system-control.yaml | 2 +-
.../bindings/timer/allwinner,sun4i-a10-timer.yaml | 2 +-
22 files changed, 39 insertions(+), 58 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
index 68917bb7c7e8..55f7938c4826 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
@@ -52,7 +52,7 @@ required:
examples:
- |
- mlahb: ahb {
+ mlahb: ahb@...00000 {
compatible = "st,mlahb", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
index 69cfa4a3d562..c604822cda07 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
@@ -40,7 +40,7 @@ additionalProperties: false
examples:
- |
- osc24M: clk@...20050 {
+ osc24M: clk@...0050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-osc-clk";
reg = <0x01c20050 0x4>;
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
index 07f38def7dc3..43963c3062c8 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
@@ -41,7 +41,7 @@ additionalProperties: false
examples:
- |
- clk@...0005c {
+ clk@...005c {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-gt-clk";
reg = <0x0600005c 0x4>;
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
index 5d5d39665119..6009324be967 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
@@ -49,11 +49,7 @@ examples:
resets = <&tcon_ch0_clk 0>;
port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tve0_in_tcon0: endpoint@0 {
- reg = <0>;
+ tve0_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_tve0>;
};
};
diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
index 6d72b3d11fbc..c21103869923 100644
--- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@@ -79,21 +79,15 @@ examples:
#size-cells = <0>;
anx6345_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- anx6345_in_tcon0: endpoint@0 {
- reg = <0>;
+ anx6345_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_anx6345>;
};
};
anx6345_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- anx6345_out_panel: endpoint@0 {
- reg = <0>;
+ anx6345_out_panel: endpoint {
remote-endpoint = <&panel_in_edp>;
};
};
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
index 4ebcea7d0c63..a614644c9849 100644
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -37,6 +37,8 @@ examples:
dsi@...50000 {
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0xff450000 0x1000>;
+
panel@0 {
compatible = "leadtek,ltk500hd1829";
reg = <0>;
diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
index 186e5e1c8fa3..22c91beb0541 100644
--- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -37,6 +37,8 @@ examples:
dsi@...50000 {
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0xff450000 0x1000>;
+
panel@0 {
compatible = "xinpeng,xpp055c272";
reg = <0>;
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
index 678776b6012a..1db608c9eef5 100644
--- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
@@ -174,10 +174,6 @@ examples:
};
};
- soc@...0000 {
- lcdc0: lcdc@...c000 {
- compatible = "allwinner,sun4i-a10-lcdc";
- };
- };
+ lcdc0: lcdc { };
...
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
index 8b5c346f23f6..34780d7535b8 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@@ -143,7 +143,7 @@ examples:
#size-cells = <2>;
dma-coherent;
dma-ranges;
- ranges;
+ ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0x05000000>;
ti,sci-dev-id = <118>;
@@ -169,16 +169,4 @@ examples:
ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
};
};
-
- mcasp0: mcasp@...00000 {
- dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
- dma-names = "tx", "rx";
- };
-
- crypto: crypto@...0000 {
- compatible = "ti,sa2ul-crypto";
-
- dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>;
- dma-names = "tx", "rx1", "rx2";
- };
};
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 4ea6a8789699..e8b99adcb1bd 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -84,31 +84,31 @@ examples:
gpu_opp_table: opp_table0 {
compatible = "operating-points-v2";
- opp@...000000 {
+ opp-533000000 {
opp-hz = /bits/ 64 <533000000>;
opp-microvolt = <1250000>;
};
- opp@...000000 {
+ opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-microvolt = <1150000>;
};
- opp@...000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1125000>;
};
- opp@...000000 {
+ opp-350000000 {
opp-hz = /bits/ 64 <350000000>;
opp-microvolt = <1075000>;
};
- opp@...000000 {
+ opp-266000000 {
opp-hz = /bits/ 64 <266000000>;
opp-microvolt = <1025000>;
};
- opp@...000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <925000>;
};
- opp@...000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <912500>;
};
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 36f59b3ade71..8d966f3ff3db 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -138,31 +138,31 @@ examples:
gpu_opp_table: opp_table0 {
compatible = "operating-points-v2";
- opp@...000000 {
+ opp-533000000 {
opp-hz = /bits/ 64 <533000000>;
opp-microvolt = <1250000>;
};
- opp@...000000 {
+ opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-microvolt = <1150000>;
};
- opp@...000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1125000>;
};
- opp@...000000 {
+ opp-350000000 {
opp-hz = /bits/ 64 <350000000>;
opp-microvolt = <1075000>;
};
- opp@...000000 {
+ opp-266000000 {
opp-hz = /bits/ 64 <266000000>;
opp-microvolt = <1025000>;
};
- opp@...000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <925000>;
};
- opp@...000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <912500>;
};
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index f46de17c0878..cc3c8ea6a894 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -123,7 +123,7 @@ examples:
samsung,syscon-phandle = <&pmu_system_controller>;
/* NTC thermistor is a hwmon device */
- ncp15wb473@0 {
+ ncp15wb473 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
index d7c3262b2494..c99ed3934d7e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -62,7 +62,7 @@ required:
examples:
- |
- i2c@...00000 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
gt928@5d {
diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
index 1ea784179536..5e066629287d 100644
--- a/Documentation/devicetree/bindings/media/ti,cal.yaml
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@@ -177,7 +177,7 @@ examples:
};
};
- i2c5: i2c@...7c000 {
+ i2c {
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
index 4a70f875a6eb..480385789394 100644
--- a/Documentation/devicetree/bindings/mfd/max77650.yaml
+++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
@@ -97,14 +97,14 @@ examples:
regulators {
compatible = "maxim,max77650-regulator";
- max77650_ldo: regulator@0 {
+ max77650_ldo: regulator-ldo {
regulator-compatible = "ldo";
regulator-name = "max77650-ldo";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <2937500>;
};
- max77650_sbb0: regulator@1 {
+ max77650_sbb0: regulator-sbb0 {
regulator-compatible = "sbb0";
regulator-name = "max77650-sbb0";
regulator-min-microvolt = <800000>;
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 3c0df4016a12..8fded83c519a 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -370,6 +370,7 @@ examples:
mmc3: mmc@...2000 {
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0x1c12000 0x200>;
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <®_vmmc3>;
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
index b43c6c65294e..65980224d550 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -76,6 +76,8 @@ examples:
qfprom: eeprom@...000 {
#address-cells = <1>;
#size-cells = <1>;
+ reg = <0x00700000 0x100000>;
+
wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
/* ... */
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
index 020ef9e4c411..94ac23687b7e 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
@@ -86,7 +86,7 @@ examples:
#include <dt-bindings/clock/sun4i-a10-ccu.h>
#include <dt-bindings/reset/sun4i-a10-ccu.h>
- usbphy: phy@...13400 {
+ usbphy: phy@...3400 {
#phy-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-phy";
reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index 754ea7ab040a..ef4de32cb17c 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -248,7 +248,7 @@ examples:
};
//Example 3 pin groups
- pinctrl@...20000 {
+ pinctrl {
usart1_pins_a: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>;
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
index 92ff2e8ad572..91a39a33000b 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -191,7 +191,7 @@ patternProperties:
examples:
- |
- xyzreg: regulator@0 {
+ xyzreg: regulator {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
index 80bac7a182d5..4b5509436588 100644
--- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -125,7 +125,7 @@ examples:
#size-cells = <1>;
ranges;
- sram_a: sram@...00000 {
+ sram_a: sram@0 {
compatible = "mmio-sram";
reg = <0x00000000 0xc000>;
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
index 23e989e09766..d918cee100ac 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
@@ -87,7 +87,7 @@ additionalProperties: false
examples:
- |
- timer {
+ timer@...0c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x400>;
interrupts = <22>,
--
2.20.1
Powered by blists - more mailing lists