[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200222214224.209860-1-megous@megous.com>
Date: Sat, 22 Feb 2020 22:42:24 +0100
From: Ondrej Jirman <megous@...ous.com>
To: linux-sunxi@...glegroups.com
Cc: Ondrej Jirman <megous@...ous.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Ripard <mripard@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS),
linux-arm-kernel@...ts.infradead.org (moderated list:ARM/Allwinner
sunXi SoC support), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH] ARM: dts: sun8i-h3: Add thermal trip points/cooling maps
This enables passive cooling by down-regulating CPU voltage
and frequency.
Signed-off-by: Ondrej Jirman <megous@...ous.com>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 7d2e30a00cd2a..dca51548881a8 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -41,6 +41,7 @@
*/
#include "sunxi-h3-h5.dtsi"
+#include <dt-bindings/thermal/thermal.h>
/ {
cpus {
@@ -204,6 +205,30 @@ cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 0>;
+
+ trips {
+ cpu_hot_trip: cpu-hot {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_very_hot_trip: cpu-very-hot {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpu-hot-limit {
+ trip = <&cpu_hot_trip>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
};
};
};
--
2.25.1
Powered by blists - more mailing lists