[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1582566751-13118-2-git-send-email-ben.levinsky@xilinx.com>
Date: Mon, 24 Feb 2020 09:52:27 -0800
From: Ben Levinsky <ben.levinsky@...inx.com>
To: ohad@...ery.com, bjorn.andersson@...aro.org,
michal.simek@...inx.com, jollys@...inx.com, rajan.vaja@...inx.com,
robh+dt@...nel.org, mark.rutland@....com
Cc: linux-remoteproc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
Add ZynqMP firmware ioctl enums for RPU configuration.
Signed-off-by: Ben Levinsky <ben.levinsky@...inx.com>
---
drivers/firmware/xilinx/zynqmp.c | 4 ++++
include/linux/firmware/xlnx-zynqmp.h | 19 +++++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index ecc339d..20e4574 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -512,6 +512,10 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
static inline int zynqmp_is_valid_ioctl(u32 ioctl_id)
{
switch (ioctl_id) {
+ case IOCTL_GET_RPU_OPER_MODE:
+ case IOCTL_SET_RPU_OPER_MODE:
+ case IOCTL_RPU_BOOT_ADDR_CONFIG:
+ case IOCTL_TCM_COMB_CONFIG:
case IOCTL_SET_PLL_FRAC_MODE:
case IOCTL_GET_PLL_FRAC_MODE:
case IOCTL_SET_PLL_FRAC_DATA:
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 2cd12eb..b8ca118 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -100,6 +100,10 @@ enum pm_ret_status {
};
enum pm_ioctl_id {
+ IOCTL_GET_RPU_OPER_MODE = 0,
+ IOCTL_SET_RPU_OPER_MODE,
+ IOCTL_RPU_BOOT_ADDR_CONFIG,
+ IOCTL_TCM_COMB_CONFIG,
IOCTL_SET_SD_TAPDELAY = 7,
IOCTL_SET_PLL_FRAC_MODE,
IOCTL_GET_PLL_FRAC_MODE,
@@ -118,6 +122,21 @@ enum pm_query_id {
PM_QID_CLOCK_GET_MAX_DIVISOR,
};
+enum rpu_oper_mode {
+ PM_RPU_MODE_LOCKSTEP,
+ PM_RPU_MODE_SPLIT,
+};
+
+enum rpu_boot_mem {
+ PM_RPU_BOOTMEM_LOVEC,
+ PM_RPU_BOOTMEM_HIVEC,
+};
+
+enum rpu_tcm_comb {
+ PM_RPU_TCM_SPLIT,
+ PM_RPU_TCM_COMB,
+};
+
enum zynqmp_pm_reset_action {
PM_RESET_ACTION_RELEASE,
PM_RESET_ACTION_ASSERT,
--
2.7.4
Powered by blists - more mailing lists