linux-kernel - [PATCH 12/15] arm64: defconfig: Enable flash device drivers for QorIQ boards

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1582585690-463-13-git-send-email-leoyang.li@nxp.com>
Date:   Mon, 24 Feb 2020 17:08:07 -0600
From:   Li Yang <leoyang.li@....com>
To:     shawnguo@...nel.org, linux-arm-kernel@...ts.infradead.org
Cc:     linux-kernel@...r.kernel.org, Li Yang <leoyang.li@....com>
Subject: [PATCH 12/15] arm64: defconfig: Enable flash device drivers for QorIQ boards

Enable the flash devices used on NXP/FSL QorIQ reference boards
supported in mainline kernel.  Drivers are enabled as built-in for RFS
access without initramfs.

Signed-off-by: Li Yang <leoyang.li@....com>
---
 arch/arm64/configs/defconfig | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 557d2cefba6d..f0d75bbaac80 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -214,6 +214,15 @@ CONFIG_SIMPLE_PM_BUS=y
 CONFIG_FSL_MC_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_SST25L=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_NAND_MARVELL=y
@@ -226,6 +235,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_NVME=m
 CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=m
 CONFIG_EEPROM_AT25=m
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
-- 
2.17.1