[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <44775ff418e0b784311c1d86aae4927da7fcc645.1582471508.git.afzal.mohd.ma@gmail.com>
Date: Mon, 24 Feb 2020 06:19:35 +0530
From: afzal mohammed <afzal.mohd.ma@...il.com>
To: linux-hexagon@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Brian Cain <bcain@...eaurora.org>,
Richard Fontana <rfontana@...hat.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Allison Randal <allison@...utok.net>,
Thomas Gleixner <tglx@...utronix.de>,
Alexios Zavras <alexios.zavras@...el.com>
Subject: [PATCH v2 04/18] hexagon: replace setup_irq() by request_irq()
request_irq() is preferred over setup_irq(). The early boot setup_irq()
invocations happen either via 'init_IRQ()' or 'time_init()', while
memory allocators are ready by 'mm_init()'.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <afzal.mohd.ma@...il.com>
---
v2:
* Replace pr_err("request_irq() on %s failed" by
pr_err("%s: request_irq() failed"
* Commit message massage
arch/hexagon/kernel/smp.c | 17 ++++++++---------
arch/hexagon/kernel/time.c | 11 +++--------
2 files changed, 11 insertions(+), 17 deletions(-)
diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c
index 0bbbe652a513..67f4b0bff250 100644
--- a/arch/hexagon/kernel/smp.c
+++ b/arch/hexagon/kernel/smp.c
@@ -114,12 +114,6 @@ void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg)
local_irq_restore(flags);
}
-static struct irqaction ipi_intdesc = {
- .handler = handle_ipi,
- .flags = IRQF_TRIGGER_RISING,
- .name = "ipi_handler"
-};
-
void __init smp_prepare_boot_cpu(void)
{
}
@@ -155,7 +149,9 @@ void start_secondary(void)
cpu = smp_processor_id();
- setup_irq(BASE_IPI_IRQ + cpu, &ipi_intdesc);
+ if (request_irq(BASE_IPI_IRQ + cpu, handle_ipi, IRQF_TRIGGER_RISING,
+ "ipi_handler", NULL))
+ pr_err("%s: request_irq() failed\n", "ipi_handler");
/* Register the clock_event dummy */
setup_percpu_clockdev();
@@ -213,8 +209,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
set_cpu_present(i, true);
/* Also need to register the interrupts for IPI */
- if (max_cpus > 1)
- setup_irq(BASE_IPI_IRQ, &ipi_intdesc);
+ if (max_cpus > 1) {
+ if (request_irq(BASE_IPI_IRQ, handle_ipi, IRQF_TRIGGER_RISING,
+ "ipi_handler", NULL))
+ pr_err("%s: request_irq() failed\n", "ipi_handler");
+ }
}
void smp_send_reschedule(int cpu)
diff --git a/arch/hexagon/kernel/time.c b/arch/hexagon/kernel/time.c
index f99e9257bed4..26550e46cf91 100644
--- a/arch/hexagon/kernel/time.c
+++ b/arch/hexagon/kernel/time.c
@@ -143,13 +143,6 @@ static irqreturn_t timer_interrupt(int irq, void *devid)
return IRQ_HANDLED;
}
-/* This should also be pulled from devtree */
-static struct irqaction rtos_timer_intdesc = {
- .handler = timer_interrupt,
- .flags = IRQF_TIMER | IRQF_TRIGGER_RISING,
- .name = "rtos_timer"
-};
-
/*
* time_init_deferred - called by start_kernel to set up timer/clock source
*
@@ -195,7 +188,9 @@ void __init time_init_deferred(void)
#endif
clockevents_register_device(ce_dev);
- setup_irq(ce_dev->irq, &rtos_timer_intdesc);
+ if (request_irq(ce_dev->irq, timer_interrupt,
+ IRQF_TIMER | IRQF_TRIGGER_RISING, "rtos_timer", NULL))
+ pr_err("%s: request_irq() failed\n", "rtos_timer");
}
void __init time_init(void)
--
2.25.1
Powered by blists - more mailing lists