| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CANAwSgSKUEJEe_H6XnKmHZNtB549jLau=TY00jzCHAC8zb_7oA@mail.gmail.com>
Date: Mon, 24 Feb 2020 15:47:29 +0530
From: Anand Moon <linux.amoon@...il.com>
To: Jerome Brunet <jbrunet@...libre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Neil Armstrong <narmstrong@...libre.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Kevin Hilman <khilman@...libre.com>,
devicetree <devicetree@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-amlogic@...ts.infradead.org,
Linux Kernel <linux-kernel@...r.kernel.org>,
"open list:COMMON CLK FRAMEWORK" <linux-clk@...r.kernel.org>
Subject: Re: [PATCHv1 3/3] clk: meson: g12a: set cpu clock divider flags too CLK_IS_CRITICAL
Hi Jerome,
On Mon, 24 Feb 2020 at 15:01, Jerome Brunet <jbrunet@...libre.com> wrote:
>
>
> On Sun 23 Feb 2020 at 14:34, Anand Moon <linux.amoon@...il.com> wrote:
>
> > Hi Martin / Jerome / Neil,
> >
> > On Fri, 21 Feb 2020 at 02:45, Martin Blumenstingl
> > <martin.blumenstingl@...glemail.com> wrote:
> >>
> >> Hi Anand,
> >>
> >> On Mon, Feb 17, 2020 at 2:30 PM Anand Moon <linux.amoon@...il.com> wrote:
> >> [...]
> >> > > > @@ -681,7 +682,7 @@ static struct clk_regmap g12b_cpub_clk = {
> >> > > > &g12a_sys_pll.hw
> >> > > > },
> >> > > > .num_parents = 2,
> >> > > > - .flags = CLK_SET_RATE_PARENT,
> >> > > > + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> >> > >
> >> > > Why not. Neil what do you think of this ?
> >> > > If nothing is claiming this clock and enabling it then I suppose it
> >> > > could make sense.
> >> > >
> >> > I would like core developers to handle this.
> >> > Sorry for the noise.
> >> can you please resend this patch with only the change to g12b_cpub_clk?
> >> I have no G12B board myself so it would be great if you could take care of this!
> >>
> >>
> >> Martin
> >
> > Thanks, yes I will try again, but I have a question.
> >
> > On eMMC module *cpub_clk* is not getting enabled, see below is
> > clk_summay of eMMC.
>
> I'm sorry but I don't understand the link between the cpu clock of the
> second cluster and MMC.
>
> > [...]
> > fclk_div2_div 1 1 0 999999985
> > 0 0 50000
> > fclk_div2 2 2 0 999999985
> > 0 0 50000
> > ff3f0000.ethernet#m250_sel 1 1 0
> > 999999985 0 0 50000
> > ff3f0000.ethernet#m250_div 1 1
> > 0 249999997 0 0 50000
> > ff3f0000.ethernet#fixed_div2 1 1
> > 0 124999998 0 0 50000
> > ff3f0000.ethernet#rgmii_tx_en 1
> > 1 0 124999998 0 0 50000
> > ffe07000.mmc#mux 1 1 0 999999985
> > 0 0 50000
> > ffe07000.mmc#div 1 1 0
> > 199999997 0 0 50000
> > cpub_clk_dyn1_sel 0 0 0
> > 999999985 0 0 50000
> > cpub_clk_dyn1 0 0 0 999999985
> > 0 0 50000
> > cpub_clk_dyn 0 0 0
> > 999999985 0 0 50000
> > cpub_clk 0 0 0
> > 999999985 0 0 50000
> > cpub_clk_div8 0 0 0
> > 124999998 0 0 50000
> > cpub_clk_div7 0 0 0
> > 142857140 0 0 50000
> > cpub_clk_div6 0 0 0
> > 166666664 0 0 50000
> > cpub_clk_trace_sel 0 0
> > 0 166666664 0 0 50000
> > cpub_clk_trace 0 0
> > 0 166666664 0 0 50000
> > cpub_clk_div5 0 0 0
> > 199999997 0 0 50000
> > cpub_clk_apb_sel 0 0
> > 0 199999997 0 0 50000
> > cpub_clk_apb 0 0
> > 0 199999997 0 0 50000
> > cpub_clk_div4 0 0 0
> > 249999996 0 0 50000
> > cpub_clk_div3 0 0 0
> > 333333328 0 0 50000
> > cpub_clk_atb_sel 0 0
> > 0 333333328 0 0 50000
> > cpub_clk_atb 0 0
> > 0 333333328 0 0 50000
> > cpub_clk_div2 0 0 0
> > 499999992 0 0 50000
> > cpub_clk_axi_sel 0 0
> > 0 499999992 0 0 50000
> > cpub_clk_axi 0 0
> > 0 499999992 0 0 50000
> > cpub_clk_div16_en 0 0
> > 0 999999985 0 0 50000
> > cpub_clk_div16 0 0
> > 0 62499999 0 0 50000
>
> I can't read that.
>
> >
> > After enable *cpub_clk* flags with
> > .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> > this clk is enabled on microSD card see clk_summary below.
>
> Again, I don't get the relationship between cpub and sdcard (or eMMC)
>
Yes their is not relation with the cpub and sdcard and eMMC,
I understood that cpub_clk is not getting enable which is causing
the staling at booting using sdcard.
sorry about this logs.
> > [...]
> > fclk_div2_div 1 1 0 999999985
> > 0 0 50000
> > fclk_div2 3 3 0 999999985
> > 0 0 50000
> > ff3f0000.ethernet#m250_sel 1 1 0
> > 999999985 0 0 50000
> > ff3f0000.ethernet#m250_div 1 1
> > 0 249999997 0 0 50000
> > ff3f0000.ethernet#fixed_div2 1 1
> > 0 124999998 0 0 50000
> > ff3f0000.ethernet#rgmii_tx_en 1
> > 1 0 124999998 0 0 50000
> > ffe05000.sd#mux 1 1 0 999999985
> > 0 0 50000
> > ffe05000.sd#div 1 1 0
> > 50000000 0 0 50000
> > cpub_clk_dyn1_sel 1 1 0
> > 999999985 0 0 50000
> > cpub_clk_dyn1 1 1 0 999999985
> > 0 0 50000
> > cpub_clk_dyn 1 1 0
> > 999999985 0 0 50000
> > cpub_clk 1 1 0
> > 999999985 0 0 50000
> > cpub_clk_div8 0 0 0
> > 124999998 0 0 50000
> > cpub_clk_div7 0 0 0
> > 142857140 0 0 50000
> > cpub_clk_div6 0 0 0
> > 166666664 0 0 50000
> > cpub_clk_trace_sel 0 0
> > 0 166666664 0 0 50000
> > cpub_clk_trace 0 0
> > 0 166666664 0 0 50000
> > cpub_clk_div5 0 0 0
> > 199999997 0 0 50000
> > cpub_clk_apb_sel 0 0
> > 0 199999997 0 0 50000
> > cpub_clk_apb 0 0
> > 0 199999997 0 0 50000
> > cpub_clk_div4 0 0 0
> > 249999996 0 0 50000
> > cpub_clk_div3 0 0 0
> > 333333328 0 0 50000
> > cpub_clk_atb_sel 0 0
> > 0 333333328 0 0 50000
> > cpub_clk_atb 0 0
> > 0 333333328 0 0 50000
> > cpub_clk_div2 0 0 0
> > 499999992 0 0 50000
> > cpub_clk_axi_sel 0 0
> > 0 499999992 0 0 50000
> > cpub_clk_axi 0 0
> > 0 499999992 0 0 50000
> > cpub_clk_div16_en 0 0
> > 0 999999985 0 0 50000
> > cpub_clk_div16 0 0
> > 0 62499999 0 0 50000
> > cpub_clk_dyn1_div 0 0 0
> > 999999985 0 0 50000
> >
> > Is this correct approach to set the flags to enable *cpub_clk*.
> > .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> >
> > What I meant is their *Dyn_enable[26]* field for enable/disable for
> > HHI_SYS_CPU_CLK_CNTL0 and HHI_SYS_CPUB_CLK_CNTL clk controller.
> > in the S922X datasheets which could help resolve this issue.
> > Any thought on this.
>
> I sorry but I'm just lost. I don't understand anything above so I can't
> comment.
I am not able to express my self clearly,
I will try to submit the patch by enable cpub_clk with following flags.
.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
-Anand
Powered by blists - more mailing lists