linux-kernel - Re: [PATCH] backlight: lp855x: Ensure regulators are disabled on probe failure

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200224143732.rreev3ypou26hvx3@holly.lan>
Date:   Mon, 24 Feb 2020 14:37:32 +0000
From:   Daniel Thompson <daniel.thompson@...aro.org>
To:     Jon Hunter <jonathanh@...dia.com>
Cc:     Milo Kim <milo.kim@...com>, Lee Jones <lee.jones@...aro.org>,
        Jingoo Han <jingoohan1@...il.com>,
        dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
        linux-tegra@...r.kernel.org
Subject: Re: [PATCH] backlight: lp855x: Ensure regulators are disabled on
 probe failure

On Mon, Feb 24, 2020 at 02:07:48PM +0000, Jon Hunter wrote:
> If probing the LP885x backlight fails after the regulators have been
> enabled, then the following warning is seen when releasing the
> regulators ...
> 
>  WARNING: CPU: 1 PID: 289 at drivers/regulator/core.c:2051 _regulator_put.part.28+0x158/0x160
>  Modules linked in: tegra_xudc lp855x_bl(+) host1x pwm_tegra ip_tables x_tables ipv6 nf_defrag_ipv6
>  CPU: 1 PID: 289 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200224 #1
>  Hardware name: NVIDIA Jetson TX1 Developer Kit (DT)
> 
>  ...
> 
>  Call trace:
>   _regulator_put.part.28+0x158/0x160
>   regulator_put+0x34/0x50
>   devm_regulator_release+0x10/0x18
>   release_nodes+0x12c/0x230
>   devres_release_all+0x34/0x50
>   really_probe+0x1c0/0x370
>   driver_probe_device+0x58/0x100
>   device_driver_attach+0x6c/0x78
>   __driver_attach+0xb0/0xf0
>   bus_for_each_dev+0x68/0xc8
>   driver_attach+0x20/0x28
>   bus_add_driver+0x160/0x1f0
>   driver_register+0x60/0x110
>   i2c_register_driver+0x40/0x80
>   lp855x_driver_init+0x20/0x1000 [lp855x_bl]
>   do_one_initcall+0x58/0x1a0
>   do_init_module+0x54/0x1d0
>   load_module+0x1d80/0x21c8
>   __do_sys_finit_module+0xe8/0x100
>   __arm64_sys_finit_module+0x18/0x20
>   el0_svc_common.constprop.3+0xb0/0x168
>   do_el0_svc+0x20/0x98
>   el0_sync_handler+0xf4/0x1b0
>   el0_sync+0x140/0x180
> 
> Fix this by ensuring that the regulators are disabled, if enabled, on
> probe failure.
> 
> Finally, ensure that the vddio regulator is disabled in the driver
> remove handler.
> 
> Signed-off-by: Jon Hunter <jonathanh@...dia.com>

Reviewed-by: Daniel Thompson <daniel.thompson@...aro.org>



> ---
>  drivers/video/backlight/lp855x_bl.c | 20 ++++++++++++++++----
>  1 file changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
> index f68920131a4a..e94932c69f54 100644
> --- a/drivers/video/backlight/lp855x_bl.c
> +++ b/drivers/video/backlight/lp855x_bl.c
> @@ -456,7 +456,7 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
>  		ret = regulator_enable(lp->enable);
>  		if (ret < 0) {
>  			dev_err(lp->dev, "failed to enable vddio: %d\n", ret);
> -			return ret;
> +			goto disable_supply;
>  		}
>  
>  		/*
> @@ -471,24 +471,34 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
>  	ret = lp855x_configure(lp);
>  	if (ret) {
>  		dev_err(lp->dev, "device config err: %d", ret);
> -		return ret;
> +		goto disable_vddio;
>  	}
>  
>  	ret = lp855x_backlight_register(lp);
>  	if (ret) {
>  		dev_err(lp->dev,
>  			"failed to register backlight. err: %d\n", ret);
> -		return ret;
> +		goto disable_vddio;
>  	}
>  
>  	ret = sysfs_create_group(&lp->dev->kobj, &lp855x_attr_group);
>  	if (ret) {
>  		dev_err(lp->dev, "failed to register sysfs. err: %d\n", ret);
> -		return ret;
> +		goto disable_vddio;
>  	}
>  
>  	backlight_update_status(lp->bl);
> +
>  	return 0;
> +
> +disable_vddio:
> +	if (lp->enable)
> +		regulator_disable(lp->enable);
> +disable_supply:
> +	if (lp->supply)
> +		regulator_disable(lp->supply);
> +
> +	return ret;
>  }
>  
>  static int lp855x_remove(struct i2c_client *cl)
> @@ -497,6 +507,8 @@ static int lp855x_remove(struct i2c_client *cl)
>  
>  	lp->bl->props.brightness = 0;
>  	backlight_update_status(lp->bl);
> +	if (lp->enable)
> +		regulator_disable(lp->enable);
>  	if (lp->supply)
>  		regulator_disable(lp->supply);
>  	sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
> -- 
> 2.17.1
>