linux-kernel - [PATCH] kbuild: Remove debug info from kallsyms linking

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <202002242114.CBED7F1@keescook>
Date:   Mon, 24 Feb 2020 21:16:17 -0800
From:   Kees Cook <keescook@...omium.org>
To:     Masahiro Yamada <masahiroy@...nel.org>
Cc:     Michal Marek <michal.lkml@...kovi.net>,
        linux-kbuild@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] kbuild: Remove debug info from kallsyms linking

When CONFIG_DEBUG_INFO is enabled, the two kallsyms linking steps spend
time collecting and writing the dwarf sections to the temporary output
files. kallsyms does not need this information, and leaving it off
halves their linking time. This is especially noticeable without
CONFIG_DEBUG_INFO_REDUCED. The BTF linking stage, however, does still
need those details.

Refactor the BTF and kallsyms generation stages slightly for more
regularized temporary names. Skip debug during kallsyms links.

For a full debug info build with BTF, my link time goes from 1m06s to
0m54s, saving about 12 seconds, or 18%.

Signed-off-by: Kees Cook <keescook@...omium.org>
---
 scripts/link-vmlinux.sh | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index dd484e92752e..ac569e197bfa 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -63,12 +63,18 @@ vmlinux_link()
 	local lds="${objtree}/${KBUILD_LDS}"
 	local output=${1}
 	local objects
+	local strip_debug
 
 	info LD ${output}
 
 	# skip output file argument
 	shift
 
+	# The kallsyms linking does not need debug symbols included.
+	if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
+		strip_debug=-Wl,--strip-debug
+	fi
+
 	if [ "${SRCARCH}" != "um" ]; then
 		objects="--whole-archive			\
 			${KBUILD_VMLINUX_OBJS}			\
@@ -79,6 +85,7 @@ vmlinux_link()
 			${@}"
 
 		${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux}	\
+			${strip_debug#-Wl,}			\
 			-o ${output}				\
 			-T ${lds} ${objects}
 	else
@@ -91,6 +98,7 @@ vmlinux_link()
 			${@}"
 
 		${CC} ${CFLAGS_vmlinux}				\
+			${strip_debug}				\
 			-o ${output}				\
 			-Wl,-T,${lds}				\
 			${objects}				\
@@ -106,6 +114,8 @@ gen_btf()
 {
 	local pahole_ver
 	local bin_arch
+	local bin_format
+	local bin_file
 
 	if ! [ -x "$(command -v ${PAHOLE})" ]; then
 		echo >&2 "BTF: ${1}: pahole (${PAHOLE}) is not available"
@@ -118,8 +128,9 @@ gen_btf()
 		return 1
 	fi
 
-	info "BTF" ${2}
 	vmlinux_link ${1}
+
+	info "BTF" ${2}
 	LLVM_OBJCOPY=${OBJCOPY} ${PAHOLE} -J ${1}
 
 	# dump .BTF section into raw binary file to link with final vmlinux
@@ -127,11 +138,12 @@ gen_btf()
 		cut -d, -f1 | cut -d' ' -f2)
 	bin_format=$(LANG=C ${OBJDUMP} -f ${1} | grep 'file format' | \
 		awk '{print $4}')
+	bin_file=.btf.vmlinux.bin
 	${OBJCOPY} --change-section-address .BTF=0 \
 		--set-section-flags .BTF=alloc -O binary \
-		--only-section=.BTF ${1} .btf.vmlinux.bin
+		--only-section=.BTF ${1} $bin_file
 	${OBJCOPY} -I binary -O ${bin_format} -B ${bin_arch} \
-		--rename-section .data=.BTF .btf.vmlinux.bin ${2}
+		--rename-section .data=.BTF $bin_file ${2}
 }
 
 # Create ${2} .o file with all symbols from the ${1} object file
@@ -166,8 +178,8 @@ kallsyms()
 kallsyms_step()
 {
 	kallsymso_prev=${kallsymso}
-	kallsymso=.tmp_kallsyms${1}.o
-	kallsyms_vmlinux=.tmp_vmlinux${1}
+	kallsyms_vmlinux=.tmp_vmlinux.kallsyms${1}
+	kallsymso=${kallsyms_vmlinux}.o
 
 	vmlinux_link ${kallsyms_vmlinux} "${kallsymso_prev}" ${btf_vmlinux_bin_o}
 	kallsyms ${kallsyms_vmlinux} ${kallsymso}
@@ -190,7 +202,6 @@ cleanup()
 {
 	rm -f .btf.*
 	rm -f .tmp_System.map
-	rm -f .tmp_kallsyms*
 	rm -f .tmp_vmlinux*
 	rm -f System.map
 	rm -f vmlinux
@@ -257,9 +268,8 @@ tr '\0' '\n' < modules.builtin.modinfo | sed -n 's/^[[:alnum:]:_]*\.file=//p' |
 
 btf_vmlinux_bin_o=""
 if [ -n "${CONFIG_DEBUG_INFO_BTF}" ]; then
-	if gen_btf .tmp_vmlinux.btf .btf.vmlinux.bin.o ; then
-		btf_vmlinux_bin_o=.btf.vmlinux.bin.o
-	else
+	btf_vmlinux_bin_o=.btf.vmlinux.bin.o
+	if ! gen_btf .tmp_vmlinux.btf $btf_vmlinux_bin_o ; then
 		echo >&2 "Failed to generate BTF for vmlinux"
 		echo >&2 "Try to disable CONFIG_DEBUG_INFO_BTF"
 		exit 1
-- 
2.20.1


-- 
Kees Cook