| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 25 Feb 2020 16:07:53 +0800
From: Ikjoon Jang <ikjn@...omium.org>
To: linux-mediatek@...ts.infradead.org,
James Liao <jamesjj.liao@...iatek.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, hsinyi@...omium.org,
drinkcat@...omium.org, Ikjoon Jang <ikjn@...omium.org>
Subject: [PATCH] arm64: dts: mt8183: adjust cpuidle target residency
Split a cluster level cpuidle state into two, so mt8183 variant
boards can adjust parameters for each cluster, and reduce cluster0's
default target residency to 1000us as power measurements showed that
its minimum residency is slightly less than cluster1's 1300us.
Signed-off-by: Ikjoon Jang <ikjn@...omium.org>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 26 ++++++++++++++++--------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index f1381e77918b..5c7dd262eaf3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -74,7 +74,7 @@ cpu0: cpu@0 {
reg = <0x000>;
enable-method = "psci";
capacity-dmips-mhz = <741>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
};
cpu1: cpu@1 {
@@ -83,7 +83,7 @@ cpu1: cpu@1 {
reg = <0x001>;
enable-method = "psci";
capacity-dmips-mhz = <741>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
};
cpu2: cpu@2 {
@@ -92,7 +92,7 @@ cpu2: cpu@2 {
reg = <0x002>;
enable-method = "psci";
capacity-dmips-mhz = <741>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
};
cpu3: cpu@3 {
@@ -101,7 +101,7 @@ cpu3: cpu@3 {
reg = <0x003>;
enable-method = "psci";
capacity-dmips-mhz = <741>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
};
cpu4: cpu@100 {
@@ -110,7 +110,7 @@ cpu4: cpu@100 {
reg = <0x100>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
};
cpu5: cpu@101 {
@@ -119,7 +119,7 @@ cpu5: cpu@101 {
reg = <0x101>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
};
cpu6: cpu@102 {
@@ -128,7 +128,7 @@ cpu6: cpu@102 {
reg = <0x102>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
};
cpu7: cpu@103 {
@@ -137,7 +137,7 @@ cpu7: cpu@103 {
reg = <0x103>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
};
idle-states {
@@ -152,7 +152,15 @@ CPU_SLEEP: cpu-sleep {
min-residency-us = <800>;
};
- CLUSTER_SLEEP: cluster-sleep {
+ CLUSTER_SLEEP0: cluster-sleep@0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x01010001>;
+ entry-latency-us = <250>;
+ exit-latency-us = <400>;
+ min-residency-us = <1000>;
+ };
+ CLUSTER_SLEEP1: cluster-sleep@1 {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x01010001>;
--
2.25.0.265.gbab2e86ba0-goog
Powered by blists - more mailing lists