| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1deb837ed325b25e4e5bc878f2ddcb733b441a82.1582617178.git.matti.vaittinen@fi.rohmeurope.com>
Date: Tue, 25 Feb 2020 10:54:25 +0200
From: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
To: matti.vaittinen@...rohmeurope.com, mazziesaccount@...il.com
Cc: Sebastian Reichel <sre@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Matti Vaittinen <matti.vaittinen@...rohmeurope.com>,
linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Markus Laine <markus.laine@...rohmeurope.com>,
Mikko Mutanen <mikko.mutanen@...rohmeurope.com>
Subject: [PATCH v4 6/9] regulator: use linear_ranges helper
Change the regulator helpers to use common linear_ranges code.
Signed-off-by: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
---
no changes since rfc-v3
drivers/regulator/Kconfig | 1 +
drivers/regulator/helpers.c | 124 ++++++++++++++-----------------
include/linux/regulator/driver.h | 25 +------
3 files changed, 59 insertions(+), 91 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 074a2ef55943..1fd2fe2b0c7a 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
menuconfig REGULATOR
bool "Voltage and Current Regulator Support"
+ select LINEAR_RANGES
help
Generic Voltage and Current Regulator support.
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index d436cc867d10..e970e9d2f8be 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -131,10 +131,11 @@ int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev)
unsigned int r_val;
int range;
unsigned int val;
- int ret, i;
- unsigned int voltages_in_range = 0;
+ int ret;
+ unsigned int voltages = 0;
+ const struct linear_range *r = rdev->desc->linear_ranges;
- if (!rdev->desc->linear_ranges)
+ if (!r)
return -EINVAL;
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
@@ -152,11 +153,9 @@ int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev)
if (range < 0)
return -EINVAL;
- for (i = 0; i < range; i++)
- voltages_in_range += (rdev->desc->linear_ranges[i].max_sel -
- rdev->desc->linear_ranges[i].min_sel) + 1;
+ voltages = linear_range_values_in_range_array(r, range);
- return val + voltages_in_range;
+ return val + voltages;
}
EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_pickable_regmap);
@@ -179,8 +178,11 @@ int regulator_set_voltage_sel_pickable_regmap(struct regulator_dev *rdev,
unsigned int voltages_in_range = 0;
for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
- voltages_in_range = (rdev->desc->linear_ranges[i].max_sel -
- rdev->desc->linear_ranges[i].min_sel) + 1;
+ const struct linear_range *r;
+
+ r = &rdev->desc->linear_ranges[i];
+ voltages_in_range = linear_range_values_in_range(r);
+
if (sel < voltages_in_range)
break;
sel -= voltages_in_range;
@@ -407,6 +409,8 @@ int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
{
const struct linear_range *range;
int ret = -EINVAL;
+ unsigned int sel;
+ bool found;
int voltage, i;
if (!rdev->desc->n_linear_ranges) {
@@ -415,35 +419,19 @@ int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
}
for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
- int linear_max_uV;
-
range = &rdev->desc->linear_ranges[i];
- linear_max_uV = range->min_uV +
- (range->max_sel - range->min_sel) * range->uV_step;
- if (!(min_uV <= linear_max_uV && max_uV >= range->min_uV))
+ ret = linear_range_get_selector_high(range, min_uV, &sel,
+ &found);
+ if (ret)
continue;
-
- if (min_uV <= range->min_uV)
- min_uV = range->min_uV;
-
- /* range->uV_step == 0 means fixed voltage range */
- if (range->uV_step == 0) {
- ret = 0;
- } else {
- ret = DIV_ROUND_UP(min_uV - range->min_uV,
- range->uV_step);
- if (ret < 0)
- return ret;
- }
-
- ret += range->min_sel;
+ ret = sel;
/*
* Map back into a voltage to verify we're still in bounds.
* If we are not, then continue checking rest of the ranges.
*/
- voltage = rdev->desc->ops->list_voltage(rdev, ret);
+ voltage = rdev->desc->ops->list_voltage(rdev, sel);
if (voltage >= min_uV && voltage <= max_uV)
break;
}
@@ -480,30 +468,25 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
int linear_max_uV;
+ bool found;
+ unsigned int sel;
range = &rdev->desc->linear_ranges[i];
- linear_max_uV = range->min_uV +
- (range->max_sel - range->min_sel) * range->uV_step;
+ linear_max_uV = linear_range_get_max_value(range);
- if (!(min_uV <= linear_max_uV && max_uV >= range->min_uV)) {
- selector += (range->max_sel - range->min_sel + 1);
+ if (!(min_uV <= linear_max_uV && max_uV >= range->min)) {
+ selector += linear_range_values_in_range(range);
continue;
}
- if (min_uV <= range->min_uV)
- min_uV = range->min_uV;
-
- /* range->uV_step == 0 means fixed voltage range */
- if (range->uV_step == 0) {
- ret = 0;
- } else {
- ret = DIV_ROUND_UP(min_uV - range->min_uV,
- range->uV_step);
- if (ret < 0)
- return ret;
+ ret = linear_range_get_selector_high(range, min_uV, &sel,
+ &found);
+ if (ret) {
+ selector += linear_range_values_in_range(range);
+ continue;
}
- ret += selector;
+ ret = selector + sel;
voltage = rdev->desc->ops->list_voltage(rdev, ret);
@@ -513,7 +496,7 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
* exit but retry until we have checked all ranges.
*/
if (voltage < min_uV || voltage > max_uV)
- selector += (range->max_sel - range->min_sel + 1);
+ selector += linear_range_values_in_range(range);
else
break;
}
@@ -571,18 +554,28 @@ int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev,
}
for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
- unsigned int sels_in_range;
+ unsigned int sel_indexes;
range = &rdev->desc->linear_ranges[i];
- sels_in_range = range->max_sel - range->min_sel;
+ sel_indexes = linear_range_values_in_range(range) - 1;
- if (all_sels + sels_in_range >= selector) {
+ if (all_sels + sel_indexes >= selector) {
selector -= all_sels;
- return range->min_uV + (range->uV_step * selector);
+ /*
+ * As we see here, pickable ranges work only as
+ * long as the first selector for each pickable
+ * range is 0, and the each subsequent range for
+ * this 'pick' follow immediately at next unused
+ * selector (Eg. there is no gaps between ranges).
+ * I think this is fine but it probably should be
+ * documented. OTOH, whole pickable range stuff
+ * might benefit from some documentation
+ */
+ return range->min + (range->step * selector);
}
- all_sels += (sels_in_range + 1);
+ all_sels += (sel_indexes + 1);
}
return -EINVAL;
@@ -604,27 +597,18 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage_pickable_linear_range);
int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc,
unsigned int selector)
{
- const struct linear_range *range;
- int i;
-
- if (!desc->n_linear_ranges) {
- BUG_ON(!desc->n_linear_ranges);
- return -EINVAL;
- }
-
- for (i = 0; i < desc->n_linear_ranges; i++) {
- range = &desc->linear_ranges[i];
-
- if (!(selector >= range->min_sel &&
- selector <= range->max_sel))
- continue;
+ unsigned int val;
+ int ret;
- selector -= range->min_sel;
+ BUG_ON(!desc->n_linear_ranges);
- return range->min_uV + (range->uV_step * selector);
- }
+ ret = linear_range_get_value_array(desc->linear_ranges,
+ desc->n_linear_ranges, selector,
+ &val);
+ if (ret)
+ return ret;
- return -EINVAL;
+ return val;
}
EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear_range);
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 8419a4321775..7a3982da8868 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -13,6 +13,7 @@
#define __LINUX_REGULATOR_DRIVER_H_
#include <linux/device.h>
+#include <linux/linear_range.h>
#include <linux/notifier.h>
#include <linux/regulator/consumer.h>
#include <linux/ww_mutex.h>
@@ -39,31 +40,13 @@ enum regulator_status {
REGULATOR_STATUS_UNDEFINED,
};
-/**
- * struct linear_range - specify linear voltage ranges
- *
- * Specify a range of voltages for regulator_map_linear_range() and
- * regulator_list_linear_range().
- *
- * @min_uV: Lowest voltage in range
- * @min_sel: Lowest selector for range
- * @max_sel: Highest selector for range
- * @uV_step: Step size
- */
-struct linear_range {
- unsigned int min_uV;
- unsigned int min_sel;
- unsigned int max_sel;
- unsigned int uV_step;
-};
-
-/* Initialize struct linear_range */
+/* Initialize struct linear_range for regulators */
#define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \
{ \
- .min_uV = _min_uV, \
+ .min = _min_uV, \
.min_sel = _min_sel, \
.max_sel = _max_sel, \
- .uV_step = _step_uV, \
+ .step = _step_uV, \
}
/**
--
2.21.0
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
Powered by blists - more mailing lists