lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200225155012.22764-1-codrin.ciubotariu@microchip.com>
Date:   Tue, 25 Feb 2020 17:50:09 +0200
From:   Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
To:     <linux-i2c@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
CC:     <ludovic.desroches@...rochip.com>, <nicolas.ferre@...rochip.com>,
        <alexandre.belloni@...tlin.com>, <robh+dt@...nel.org>,
        <peda@...ntia.se>, <linux@...linux.org.uk>, <wsa@...-dreams.de>,
        Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
Subject: [PATCH v4 1/4] i2c: at91: Send bus clear command if SDA is down

After a transfer timeout, some faulty I2C slave devices might hold down
the SDA pin. We can generate a bus clear command, hoping that the slave
might release the pins.
If the CLEAR command is not supported, we will use gpio recovery, if
available, to reset the bus.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
---

Changes in v4:
 - moved the HW bus clear command in a recover_bus() function, to be able
   to just call i2c_recover_bus() if a transfer fails;
 - recovery gpios are no longer taken if HW bus clear command is
   supported;  

Changes in v3:
 - removed unnecessary condition from info print;
 - removed unneded declarations;

Changes in v2:
 - called i2c_recover_bus() after an error occurs, if SDA is down;
 - release gpios if recovery information is incomplete;

 drivers/i2c/busses/i2c-at91-core.c   |  2 ++
 drivers/i2c/busses/i2c-at91-master.c | 49 ++++++++++++++++++++++++----
 drivers/i2c/busses/i2c-at91.h        |  7 +++-
 3 files changed, 50 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
index 3da1a8acecb5..e14edd236108 100644
--- a/drivers/i2c/busses/i2c-at91-core.c
+++ b/drivers/i2c/busses/i2c-at91-core.c
@@ -131,6 +131,7 @@ static struct at91_twi_pdata sama5d2_config = {
 	.has_dig_filtr = true,
 	.has_adv_dig_filtr = true,
 	.has_ana_filtr = true,
+	.has_clear_cmd = false,	/* due to errata, CLEAR cmd is not working */
 };
 
 static struct at91_twi_pdata sam9x60_config = {
@@ -142,6 +143,7 @@ static struct at91_twi_pdata sam9x60_config = {
 	.has_dig_filtr = true,
 	.has_adv_dig_filtr = true,
 	.has_ana_filtr = true,
+	.has_clear_cmd = true,
 };
 
 static const struct of_device_id atmel_twi_dt_ids[] = {
diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
index 0aba51a7df32..776e95962ab6 100644
--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -480,7 +480,6 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 	unsigned long time_left;
 	bool has_unre_flag = dev->pdata->has_unre_flag;
 	bool has_alt_cmd = dev->pdata->has_alt_cmd;
-	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
 
 	/*
 	 * WARNING: the TXCOMP bit in the Status Register is NOT a clear on
@@ -641,11 +640,12 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 			       AT91_TWI_THRCLR | AT91_TWI_LOCKCLR);
 	}
 
-	if (rinfo->get_sda && !(rinfo->get_sda(&dev->adapter))) {
-		dev_dbg(dev->dev,
-			"SDA is down; clear bus using gpio\n");
-		i2c_recover_bus(&dev->adapter);
-	}
+	/*
+	 * some faulty I2C slave devices might hold SDA down;
+	 * we can send a bus clear command, hoping that the pins will be
+	 * released
+	 */
+	i2c_recover_bus(&dev->adapter);
 
 	return ret;
 }
@@ -830,7 +830,7 @@ static void at91_unprepare_twi_recovery(struct i2c_adapter *adap)
 	pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
 }
 
-static int at91_init_twi_recovery_info(struct platform_device *pdev,
+static int at91_init_twi_recovery_gpio(struct platform_device *pdev,
 				       struct at91_twi_dev *dev)
 {
 	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
@@ -880,6 +880,41 @@ static int at91_init_twi_recovery_info(struct platform_device *pdev,
 	return 0;
 }
 
+static int at91_twi_recover_bus_cmd(struct i2c_adapter *adap)
+{
+	struct at91_twi_dev *dev = i2c_get_adapdata(adap);
+
+	dev->transfer_status |= at91_twi_read(dev, AT91_TWI_SR);
+	if (!(dev->transfer_status & AT91_TWI_SDA)) {
+		dev_dbg(dev->dev, "SDA is down; sending bus clear command\n");
+		if (dev->use_alt_cmd) {
+			unsigned int acr;
+
+			acr = at91_twi_read(dev, AT91_TWI_ACR);
+			acr &= ~AT91_TWI_ACR_DATAL_MASK;
+			at91_twi_write(dev, AT91_TWI_ACR, acr);
+		}
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_CLEAR);
+	}
+
+	return 0;
+}
+
+static int at91_init_twi_recovery_info(struct platform_device *pdev,
+				       struct at91_twi_dev *dev)
+{
+	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
+	bool has_clear_cmd = dev->pdata->has_clear_cmd;
+
+	if (!has_clear_cmd)
+		return at91_init_twi_recovery_gpio(pdev, dev);
+
+	rinfo->recover_bus = at91_twi_recover_bus_cmd;
+	dev->adapter.bus_recovery_info = rinfo;
+
+	return 0;
+}
+
 int at91_twi_probe_master(struct platform_device *pdev,
 			  u32 phy_addr, struct at91_twi_dev *dev)
 {
diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
index f57a6cab96b4..7e7b4955ca7f 100644
--- a/drivers/i2c/busses/i2c-at91.h
+++ b/drivers/i2c/busses/i2c-at91.h
@@ -36,6 +36,7 @@
 #define	AT91_TWI_SVDIS		BIT(5)	/* Slave Transfer Disable */
 #define	AT91_TWI_QUICK		BIT(6)	/* SMBus quick command */
 #define	AT91_TWI_SWRST		BIT(7)	/* Software Reset */
+#define	AT91_TWI_CLEAR		BIT(15) /* Bus clear command */
 #define	AT91_TWI_ACMEN		BIT(16) /* Alternative Command Mode Enable */
 #define	AT91_TWI_ACMDIS		BIT(17) /* Alternative Command Mode Disable */
 #define	AT91_TWI_THRCLR		BIT(24) /* Transmit Holding Register Clear */
@@ -69,6 +70,8 @@
 #define	AT91_TWI_NACK		BIT(8)	/* Not Acknowledged */
 #define	AT91_TWI_EOSACC		BIT(11)	/* End Of Slave Access */
 #define	AT91_TWI_LOCK		BIT(23) /* TWI Lock due to Frame Errors */
+#define	AT91_TWI_SCL		BIT(24) /* TWI SCL status */
+#define	AT91_TWI_SDA		BIT(25) /* TWI SDA status */
 
 #define	AT91_TWI_INT_MASK \
 	(AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK \
@@ -81,7 +84,8 @@
 #define	AT91_TWI_THR		0x0034	/* Transmit Holding Register */
 
 #define	AT91_TWI_ACR		0x0040	/* Alternative Command Register */
-#define	AT91_TWI_ACR_DATAL(len)	((len) & 0xff)
+#define	AT91_TWI_ACR_DATAL_MASK	GENMASK(15, 0)
+#define	AT91_TWI_ACR_DATAL(len)	((len) & AT91_TWI_ACR_DATAL_MASK)
 #define	AT91_TWI_ACR_DIR	BIT(8)
 
 #define AT91_TWI_FILTR		0x0044
@@ -118,6 +122,7 @@ struct at91_twi_pdata {
 	bool has_dig_filtr;
 	bool has_adv_dig_filtr;
 	bool has_ana_filtr;
+	bool has_clear_cmd;
 	struct at_dma_slave dma_slave;
 };
 
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ