linux-kernel - [PATCH 3/3] arm64: dts: ls1028a: sl28: add support for variant 2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200225175756.29508-4-michael@walle.cc>
Date:   Tue, 25 Feb 2020 18:57:56 +0100
From:   Michael Walle <michael@...le.cc>
To:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Cc:     Shawn Guo <shawnguo@...nel.org>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Li Yang <leoyang.li@....com>, Michael Walle <michael@...le.cc>
Subject: [PATCH 3/3] arm64: dts: ls1028a: sl28: add support for variant 2

Now that there is support for the Felix switch this variant can also be
added. It features two external ports ethernet ports which are connected
to the internal switch core. No direct connection to any of the enetc's
is supported.

Signed-off-by: Michael Walle <michael@...le.cc>
---
 arch/arm64/boot/dts/freescale/Makefile        |  1 +
 .../fsl-ls1028a-kontron-sl28-var2.dts         | 68 +++++++++++++++++++
 2 files changed, 69 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 0d36c6e64574..c04bfa72d83e 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
new file mode 100644
index 000000000000..0a34ff682027
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 2 which has two ethernet ports. These
+ * ports are connected to the internal switch.
+ *
+ * Copyright (C) 2020 Michael Walle <michael@...le.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (TSN-on-module)";
+	compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+	phy0: ethernet-phy@5 {
+		reg = <0x5>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+
+	phy1: ethernet-phy@4 {
+		reg = <0x4>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+};
+
+&enetc_port0 {
+	status = "disabled";
+	/*
+	 * In the base device tree the PHY was registered in the mdio
+	 * subnode as it is PHY for this port. On this module this PHY
+	 * is connected to a switch port instead and registered above.
+	 * Therefore, delete the mdio subnode as well as the phy-handle
+	 * property here.
+	 */
+	/delete-property/ phy-handle;
+	/delete-node/ mdio;
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "gbe0";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "gbe1";
+	phy-handle = <&phy1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
+};
-- 
2.20.1