linux-kernel - [PATCH 03/13] arm: dts: calxeda: Fix interrupt grouping

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 26 Feb 2020 18:08:51 +0000
From:   Andre Przywara <andre.przywara@....com>
To:     Rob Herring <robh@...nel.org>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Cc:     Robert Richter <rric@...nel.org>, soc@...nel.org,
        Jon Loeliger <jdl@....com>,
        Mark Langsdorf <mlangsdo@...hat.com>,
        Eric Auger <eric.auger@...hat.com>,
        Will Deacon <will@...nel.org>,
        Catalin Marinas <catalin.marinas@....com>
Subject: [PATCH 03/13] arm: dts: calxeda: Fix interrupt grouping

Currently multiple interrupts for some devices are written as one array
instead of using the DT grouping notation (<0 42 4>, <0 23 4>).
This ends up in the same binary representation in the .dtb, but is
semantically not equivalent. The yaml schema checks will stumble over
this, so lets fix that first.

I refrained from using the symbolic names for GIC_SPI/GIC_PPI and
IRQ_TYPE_LEVEL_HIGH, mostly because it increases the delta between the
original DTS files and the mainline versions, so it's just additional
churn.

Signed-off-by: Andre Przywara <andre.przywara@....com>
---
 arch/arm/boot/dts/ecx-2000.dts    | 2 +-
 arch/arm/boot/dts/ecx-common.dtsi | 4 ++--
 arch/arm/boot/dts/highbank.dts    | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
index 81eb382b4c23..93cdd020637b 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -92,7 +92,7 @@
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index f819e3328a9e..b7e74a357471 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -202,14 +202,14 @@
 		ethernet@...50000 {
 			compatible = "calxeda,hb-xgmac";
 			reg = <0xfff50000 0x1000>;
-			interrupts = <0 77 4  0 78 4  0 79 4>;
+			interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
 			dma-coherent;
 		};
 
 		ethernet@...51000 {
 			compatible = "calxeda,hb-xgmac";
 			reg = <0xfff51000 0x1000>;
-			interrupts = <0 80 4  0 81 4  0 82 4>;
+			interrupts = <0 80 4>, <0 81 4>, <0 82 4>;
 			dma-coherent;
 		};
 
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 9e34d1bd7994..b6b0225a769e 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -142,14 +142,14 @@
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
 		};
 
 
 		sregs@...3c200 {
 			compatible = "calxeda,hb-sregs-l2-ecc";
 			reg = <0xfff3c200 0x100>;
-			interrupts = <0 71 4  0 72 4>;
+			interrupts = <0 71 4>, <0 72 4>;
 		};
 
 	};
-- 
2.17.1