| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1582701171-26842-3-git-send-email-peng.fan@nxp.com>
Date: Wed, 26 Feb 2020 15:12:51 +0800
From: peng.fan@....com
To: sudeep.holla@....com, robh+dt@...nel.org, mark.rutland@....com,
robh@...nel.org
Cc: viresh.kumar@...aro.org, f.fainelli@...il.com, linux-imx@....com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, andre.przywara@....com,
Peng Fan <peng.fan@....com>
Subject: [PATCH V3 2/2] firmware: arm_scmi: add smc/hvc transport
From: Peng Fan <peng.fan@....com>
Take arm,smc-id as the 1st arg, and protocol id as the 2nd arg when
issuing SMC/HVC. Since we need protocol id, so add this parameter
to scmi_chan_info, then smc transport driver could directly use it.
There is no Rx, only Tx because of smc/hvc not support Rx.
Signed-off-by: Peng Fan <peng.fan@....com>
---
drivers/firmware/arm_scmi/Makefile | 2 +-
drivers/firmware/arm_scmi/common.h | 3 +
drivers/firmware/arm_scmi/driver.c | 2 +
drivers/firmware/arm_scmi/smc.c | 146 +++++++++++++++++++++++++++++++++++++
4 files changed, 152 insertions(+), 1 deletion(-)
create mode 100644 drivers/firmware/arm_scmi/smc.c
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index 6694d0d908d6..6b1b0d6c6d0e 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -2,6 +2,6 @@
obj-y = scmi-bus.o scmi-driver.o scmi-protocols.o scmi-transport.o
scmi-bus-y = bus.o
scmi-driver-y = driver.o
-scmi-transport-y = mailbox.o shmem.o
+scmi-transport-y = mailbox.o shmem.o smc.o
scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o
obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 5ac06469b01c..8cf330809e9e 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -162,11 +162,13 @@ int scmi_base_protocol_init(struct scmi_handle *h);
* channel
* @handle: Pointer to SCMI entity handle
* @transport_info: Transport layer related information
+ * @prot_id: The id of the protocol that will use this channel
*/
struct scmi_chan_info {
struct device *dev;
struct scmi_handle *handle;
void *transport_info;
+ int prot_id;
};
/**
@@ -210,6 +212,7 @@ struct scmi_desc {
};
extern const struct scmi_desc scmi_mailbox_desc;
+extern const struct scmi_desc scmi_smc_desc;
void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr);
void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id);
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index dbec767222e9..3715aecd0fc1 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -606,6 +606,7 @@ static int scmi_chan_setup(struct scmi_info *info, struct device *dev,
return ret;
}
+ cinfo->prot_id = prot_id;
cinfo->handle = &info->handle;
return 0;
}
@@ -827,6 +828,7 @@ ATTRIBUTE_GROUPS(versions);
/* Each compatible listed below must have descriptor associated with it */
static const struct of_device_id scmi_of_match[] = {
{ .compatible = "arm,scmi", .data = &scmi_mailbox_desc },
+ { .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
{ /* Sentinel */ },
};
diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
new file mode 100644
index 000000000000..58d5f44fa77b
--- /dev/null
+++ b/drivers/firmware/arm_scmi/smc.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Message SMC/HVC
+ * Transport driver
+ *
+ * Copyright 2020 NXP
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include "common.h"
+
+/**
+ * struct scmi_smc - Structure representing a SCMI smc transport
+ *
+ * @cinfo: SCMI channel info
+ * @shmem: Transmit/Receive shared memory area
+ * @func_id: smc/hvc call function id
+ */
+
+struct scmi_smc {
+ struct scmi_chan_info *cinfo;
+ struct scmi_shared_mem __iomem *shmem;
+ u32 func_id;
+};
+
+static bool smc_chan_available(struct device *dev, int idx)
+{
+ return true;
+}
+
+static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
+ bool tx)
+{
+ struct device *cdev = cinfo->dev;
+ struct scmi_smc *scmi_info;
+ resource_size_t size;
+ struct resource res;
+ struct device_node *np;
+ u32 func_id;
+ int ret;
+
+ if (!tx)
+ return -ENODEV;
+
+ scmi_info = devm_kzalloc(dev, sizeof(*scmi_info), GFP_KERNEL);
+ if (!scmi_info)
+ return -ENOMEM;
+
+ np = of_parse_phandle(cdev->of_node, "shmem", 0);
+ if (!np)
+ np = of_parse_phandle(dev->of_node, "shmem", 0);
+ ret = of_address_to_resource(np, 0, &res);
+ of_node_put(np);
+ if (ret) {
+ dev_err(cdev, "failed to get SCMI Tx shared memory\n");
+ return ret;
+ }
+
+ size = resource_size(&res);
+ scmi_info->shmem = devm_ioremap(dev, res.start, size);
+ if (!scmi_info->shmem) {
+ dev_err(dev, "failed to ioremap SCMI Tx shared memory\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ ret = of_property_read_u32(dev->of_node, "arm,smc-id", &func_id);
+ if (ret < 0)
+ return ret;
+
+ scmi_info->func_id = func_id;
+ scmi_info->cinfo = cinfo;
+ cinfo->transport_info = scmi_info;
+
+ return 0;
+}
+
+static int smc_chan_free(int id, void *p, void *data)
+{
+ struct scmi_chan_info *cinfo = p;
+ struct scmi_smc *scmi_info = cinfo->transport_info;
+
+ cinfo->transport_info = NULL;
+ scmi_info->cinfo = NULL;
+
+ scmi_free_channel(cinfo, data, id);
+
+ return 0;
+}
+
+static int smc_send_message(struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer)
+{
+ struct scmi_smc *scmi_info = cinfo->transport_info;
+ struct arm_smccc_res res;
+
+ shmem_tx_prepare(scmi_info->shmem, xfer);
+
+ arm_smccc_1_1_invoke(scmi_info->func_id, cinfo->prot_id, 0, 0, 0,
+ 0, 0, 0, &res);
+ scmi_rx_callback(scmi_info->cinfo, shmem_read_header(scmi_info->shmem));
+
+ return res.a0;
+}
+
+static void smc_mark_txdone(struct scmi_chan_info *cinfo, int ret)
+{
+}
+
+static void smc_fetch_response(struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer)
+{
+ struct scmi_smc *scmi_info = cinfo->transport_info;
+
+ shmem_fetch_response(scmi_info->shmem, xfer);
+}
+
+static bool
+smc_poll_done(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
+{
+ struct scmi_smc *scmi_info = cinfo->transport_info;
+
+ return shmem_poll_done(scmi_info->shmem, xfer);
+}
+
+static struct scmi_transport_ops scmi_smc_ops = {
+ .chan_available = smc_chan_available,
+ .chan_setup = smc_chan_setup,
+ .chan_free = smc_chan_free,
+ .send_message = smc_send_message,
+ .mark_txdone = smc_mark_txdone,
+ .fetch_response = smc_fetch_response,
+ .poll_done = smc_poll_done,
+};
+
+const struct scmi_desc scmi_smc_desc = {
+ .ops = &scmi_smc_ops,
+ .max_rx_timeout_ms = 30,
+ .max_msg = 1,
+ .max_msg_size = 128,
+};
--
2.16.4
Powered by blists - more mailing lists