linux-kernel - [PATCH v4] serial: 8250-mtk: modify mtk uart power and clock management

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 26 Feb 2020 16:53:45 +0800
From:   Changqi Hu <changqi.hu@...iatek.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jslaby@...e.com>,
        Matthias Brugger <matthias.bgg@...il.com>
CC:     Vinod Koul <vkoul@...nel.org>,
        Nicolas Boichat <drinkcat@...omium.org>,
        Frank Wunderlich <frank-w@...lic-files.de>,
        Claire Chang <tientzu@...omium.org>,
        <linux-serial@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>,
        <srv_heupstream@...iatek.com>, <linux-kernel@...r.kernel.org>,
        Yingjoe Chen <yingjoe.chen@...iatek.com>,
        Eddie Huang <eddie.huang@...iatek.com>,
        Changqi Hu <changqi.hu@...iatek.com>
Subject: [PATCH v4] serial: 8250-mtk: modify mtk uart power and clock management

MTK uart design no need to control uart clock,
so we just control bus clock in runtime function.
Add uart clock used count to avoid repeatedly switching the clock.

Signed-off-by: Changqi Hu <changqi.hu@...iatek.com>
---

Changes in v4:
 Modify commit-message

Changes in v3:
 Merge patch v1 and v2 together.
 
Changes in v2:
 Enable uart bus clock when probe and resume base on v1 patch,
 but miss v1 patch itself.

 drivers/tty/serial/8250/8250_mtk.c | 50 ++++++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 18 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 4d067f5..f839380 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -32,6 +32,7 @@
 #define MTK_UART_RXTRI_AD	0x14	/* RX Trigger address */
 #define MTK_UART_FRACDIV_L	0x15	/* Fractional divider LSB address */
 #define MTK_UART_FRACDIV_M	0x16	/* Fractional divider MSB address */
+#define MTK_UART_DEBUG0	0x18
 #define MTK_UART_IER_XOFFI	0x20	/* Enable XOFF character interrupt */
 #define MTK_UART_IER_RTSI	0x40	/* Enable RTS Modem status interrupt */
 #define MTK_UART_IER_CTSI	0x80	/* Enable CTS Modem status interrupt */
@@ -388,9 +389,18 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
 static int __maybe_unused mtk8250_runtime_suspend(struct device *dev)
 {
 	struct mtk8250_data *data = dev_get_drvdata(dev);
+	struct uart_8250_port *up = serial8250_get_port(data->line);
 
-	clk_disable_unprepare(data->uart_clk);
-	clk_disable_unprepare(data->bus_clk);
+	/* wait until UART in idle status */
+	while
+		(serial_in(up, MTK_UART_DEBUG0));
+
+	if (data->clk_count == 0U) {
+		dev_dbg(dev, "%s clock count is 0\n", __func__);
+	} else {
+		clk_disable_unprepare(data->bus_clk);
+		data->clk_count--;
+	}
 
 	return 0;
 }
@@ -400,16 +410,16 @@ static int __maybe_unused mtk8250_runtime_resume(struct device *dev)
 	struct mtk8250_data *data = dev_get_drvdata(dev);
 	int err;
 
-	err = clk_prepare_enable(data->uart_clk);
-	if (err) {
-		dev_warn(dev, "Can't enable clock\n");
-		return err;
-	}
-
-	err = clk_prepare_enable(data->bus_clk);
-	if (err) {
-		dev_warn(dev, "Can't enable bus clock\n");
-		return err;
+	if (data->clk_count > 0U) {
+		dev_dbg(dev, "%s clock count is %d\n", __func__,
+			data->clk_count);
+	} else {
+		err = clk_prepare_enable(data->bus_clk);
+		if (err) {
+			dev_warn(dev, "Can't enable bus clock\n");
+			return err;
+		}
+		data->clk_count++;
 	}
 
 	return 0;
@@ -419,12 +429,14 @@ static void
 mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
 {
 	if (!state)
-		pm_runtime_get_sync(port->dev);
+		if (!mtk8250_runtime_resume(port->dev))
+			pm_runtime_get_sync(port->dev);
 
 	serial8250_do_pm(port, state, old);
 
 	if (state)
-		pm_runtime_put_sync_suspend(port->dev);
+		if (!pm_runtime_put_sync_suspend(port->dev))
+			mtk8250_runtime_suspend(port->dev);
 }
 
 #ifdef CONFIG_SERIAL_8250_DMA
@@ -501,6 +513,8 @@ static int mtk8250_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENOMEM;
 
+	data->clk_count = 0;
+
 	if (pdev->dev.of_node) {
 		err = mtk8250_probe_of(pdev, &uart.port, data);
 		if (err)
@@ -533,6 +547,7 @@ static int mtk8250_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
+	pm_runtime_enable(&pdev->dev);
 	err = mtk8250_runtime_resume(&pdev->dev);
 	if (err)
 		return err;
@@ -541,9 +556,6 @@ static int mtk8250_probe(struct platform_device *pdev)
 	if (data->line < 0)
 		return data->line;
 
-	pm_runtime_set_active(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
-
 	data->rx_wakeup_irq = platform_get_irq_optional(pdev, 1);
 
 	return 0;
@@ -556,11 +568,13 @@ static int mtk8250_remove(struct platform_device *pdev)
 	pm_runtime_get_sync(&pdev->dev);
 
 	serial8250_unregister_port(data->line);
-	mtk8250_runtime_suspend(&pdev->dev);
 
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
 
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		mtk8250_runtime_suspend(&pdev->dev);
+
 	return 0;
 }
 
-- 
2.6.4