linux-kernel - [PATCH 4.19 55/97] tty: serial: qcom_geni

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 27 Feb 2020 14:37:03 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Ryan Case <ryandcase@...omium.org>,
        Douglas Anderson <dianders@...omium.org>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.19 55/97] tty: serial: qcom_geni_serial: Remove interrupt storm

From: Ryan Case <ryandcase@...omium.org>

[ Upstream commit 64a428077758383518c258641e81d57fcd454792 ]

Disable M_TX_FIFO_WATERMARK_EN after we've sent all data for a given
transaction so we don't continue to receive a flurry of free space
interrupts while waiting for the M_CMD_DONE notification. Re-enable the
watermark when establishing the next transaction.

Also clear the watermark interrupt after filling the FIFO so we do not
receive notification again prior to actually having free space.

Signed-off-by: Ryan Case <ryandcase@...omium.org>
Reviewed-by: Douglas Anderson <dianders@...omium.org>
Tested-by: Douglas Anderson <dianders@...omium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 2003dfcace5d8..743d877e7ff94 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -727,6 +727,7 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
 	size_t pending;
 	int i;
 	u32 status;
+	u32 irq_en;
 	unsigned int chunk;
 	int tail;
 
@@ -755,6 +756,11 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
 	if (!port->tx_remaining) {
 		qcom_geni_serial_setup_tx(uport, pending);
 		port->tx_remaining = pending;
+
+		irq_en = readl_relaxed(uport->membase + SE_GENI_M_IRQ_EN);
+		if (!(irq_en & M_TX_FIFO_WATERMARK_EN))
+			writel_relaxed(irq_en | M_TX_FIFO_WATERMARK_EN,
+					uport->membase + SE_GENI_M_IRQ_EN);
 	}
 
 	remaining = chunk;
@@ -778,7 +784,23 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
 	}
 
 	xmit->tail = tail & (UART_XMIT_SIZE - 1);
+
+	/*
+	 * The tx fifo watermark is level triggered and latched. Though we had
+	 * cleared it in qcom_geni_serial_isr it will have already reasserted
+	 * so we must clear it again here after our writes.
+	 */
+	writel_relaxed(M_TX_FIFO_WATERMARK_EN,
+			uport->membase + SE_GENI_M_IRQ_CLEAR);
+
 out_write_wakeup:
+	if (!port->tx_remaining) {
+		irq_en = readl_relaxed(uport->membase + SE_GENI_M_IRQ_EN);
+		if (irq_en & M_TX_FIFO_WATERMARK_EN)
+			writel_relaxed(irq_en & ~M_TX_FIFO_WATERMARK_EN,
+					uport->membase + SE_GENI_M_IRQ_EN);
+	}
+
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(uport);
 }
@@ -814,8 +836,7 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
 		tty_insert_flip_char(tport, 0, TTY_OVERRUN);
 	}
 
-	if (m_irq_status & (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN) &&
-	    m_irq_en & (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN))
+	if (m_irq_status & m_irq_en & (M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN))
 		qcom_geni_serial_handle_tx(uport, m_irq_status & M_CMD_DONE_EN,
 					geni_status & M_GENI_CMD_ACTIVE);
 
-- 
2.20.1