lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 27 Feb 2020 14:37:25 -0600
From:   Rob Herring <robh+dt@...nel.org>
To:     Kevin Tang <kevin3.tang@...il.com>
Cc:     Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
        Maxime Ripard <mripard@...nel.org>,
        Sean Paul <sean@...rly.run>, David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        Mark Rutland <mark.rutland@....com>,
        Orson Zhai <orsonzhai@...il.com>,
        Baolin Wang <baolin.wang@...aro.org>,
        Lyra Zhang <zhang.lyra@...il.com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        dri-devel <dri-devel@...ts.freedesktop.org>
Subject: Re: [PATCH RFC v4 4/6] drm/sprd: add Unisoc's drm display controller driver

On Wed, Feb 26, 2020 at 3:46 AM Kevin Tang <kevin3.tang@...il.com> wrote:
>
> Adds DPU(Display Processor Unit) support for the Unisoc's display subsystem.
> It's support multi planes, scaler, rotation, PQ(Picture Quality) and more.
>
> Cc: Orson Zhai <orsonzhai@...il.com>
> Cc: Baolin Wang <baolin.wang@...aro.org>
> Cc: Chunyan Zhang <zhang.lyra@...il.com>
> Signed-off-by: Kevin Tang <kevin.tang@...soc.com>
> ---
>  drivers/gpu/drm/sprd/Makefile       |   5 +-
>  drivers/gpu/drm/sprd/dpu/Makefile   |   7 +
>  drivers/gpu/drm/sprd/dpu/dpu_r2p0.c | 770 ++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/sprd/sprd_dpu.c     | 586 +++++++++++++++++++++++++++
>  drivers/gpu/drm/sprd/sprd_dpu.h     | 127 ++++++
>  drivers/gpu/drm/sprd/sprd_drm.c     |   1 +
>  drivers/gpu/drm/sprd/sprd_drm.h     |   2 +
>  7 files changed, 1497 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/gpu/drm/sprd/dpu/Makefile
>  create mode 100644 drivers/gpu/drm/sprd/dpu/dpu_r2p0.c
>  create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.c
>  create mode 100644 drivers/gpu/drm/sprd/sprd_dpu.h
>
> diff --git a/drivers/gpu/drm/sprd/Makefile b/drivers/gpu/drm/sprd/Makefile
> index 86d95d9..88ab32a 100644
> --- a/drivers/gpu/drm/sprd/Makefile
> +++ b/drivers/gpu/drm/sprd/Makefile
> @@ -2,4 +2,7 @@
>
>  subdir-ccflags-y += -I$(srctree)/$(src)
>
> -obj-y := sprd_drm.o
> +obj-y := sprd_drm.o \
> +       sprd_dpu.o
> +
> +obj-y += dpu/
> diff --git a/drivers/gpu/drm/sprd/dpu/Makefile b/drivers/gpu/drm/sprd/dpu/Makefile
> new file mode 100644
> index 0000000..73bd497
> --- /dev/null
> +++ b/drivers/gpu/drm/sprd/dpu/Makefile
> @@ -0,0 +1,7 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +ifdef CONFIG_ARM64
> +KBUILD_CFLAGS += -mstrict-align
> +endif
> +
> +obj-y += dpu_r2p0.o
> diff --git a/drivers/gpu/drm/sprd/dpu/dpu_r2p0.c b/drivers/gpu/drm/sprd/dpu/dpu_r2p0.c
> new file mode 100644
> index 0000000..984fa9b
> --- /dev/null
> +++ b/drivers/gpu/drm/sprd/dpu/dpu_r2p0.c
> @@ -0,0 +1,770 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Unisoc Inc.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/wait.h>
> +#include <linux/workqueue.h>
> +#include "sprd_dpu.h"
> +
> +#define DISPC_INT_FBC_PLD_ERR_MASK     BIT(8)
> +#define DISPC_INT_FBC_HDR_ERR_MASK     BIT(9)
> +
> +#define DISPC_INT_MMU_INV_WR_MASK      BIT(19)
> +#define DISPC_INT_MMU_INV_RD_MASK      BIT(18)
> +#define DISPC_INT_MMU_VAOR_WR_MASK     BIT(17)
> +#define DISPC_INT_MMU_VAOR_RD_MASK     BIT(16)
> +
> +struct layer_reg {
> +       u32 addr[4];
> +       u32 ctrl;
> +       u32 size;
> +       u32 pitch;
> +       u32 pos;
> +       u32 alpha;
> +       u32 ck;
> +       u32 pallete;
> +       u32 crop_start;
> +};
> +
> +struct wb_region_reg {
> +       u32 pos;
> +       u32 size;
> +};
> +
> +/* dpu controller register */
> +struct dpu_reg {

structs for registers is not normal coding style. #defines of offsets
is. More below.

> +       u32 dpu_version;
> +       u32 dpu_ctrl;
> +       u32 dpu_cfg0;
> +       u32 dpu_cfg1;
> +       u32 dpu_cfg2;
> +       u32 dpu_secure;
> +       u32 reserved_0x0018_0x001C[2];
> +       u32 panel_size;
> +       u32 blend_size;
> +       u32 reserved_0x0028;
> +       u32 bg_color;
> +       struct layer_reg layers[8];
> +       u32 wb_base_addr;
> +       u32 wb_ctrl;
> +       u32 wb_cfg;
> +       u32 wb_pitch;
> +       struct wb_region_reg region[3];
> +       u32 reserved_0x01D8_0x01DC[2];
> +       u32 dpu_int_en;
> +       u32 dpu_int_clr;
> +       u32 dpu_int_sts;
> +       u32 dpu_int_raw;
> +       u32 dpi_ctrl;
> +       u32 dpi_h_timing;
> +       u32 dpi_v_timing;
> +       u32 reserved_0x01FC;
> +       u32 dpu_enhance_cfg;
> +       u32 reserved_0x0204_0x020C[3];
> +       u32 epf_epsilon;
> +       u32 epf_gain0_3;
> +       u32 epf_gain4_7;
> +       u32 epf_diff;
> +       u32 reserved_0x0220_0x023C[8];
> +       u32 hsv_lut_addr;
> +       u32 hsv_lut_wdata;
> +       u32 hsv_lut_rdata;
> +       u32 reserved_0x024C_0x027C[13];
> +       u32 cm_coef01_00;
> +       u32 cm_coef03_02;
> +       u32 cm_coef11_10;
> +       u32 cm_coef13_12;
> +       u32 cm_coef21_20;
> +       u32 cm_coef23_22;
> +       u32 reserved_0x0298_0x02BC[10];
> +       u32 slp_cfg0;
> +       u32 slp_cfg1;
> +       u32 reserved_0x02C8_0x02FC[14];
> +       u32 gamma_lut_addr;
> +       u32 gamma_lut_wdata;
> +       u32 gamma_lut_rdata;
> +       u32 reserved_0x030C_0x033C[13];
> +       u32 checksum_en;
> +       u32 checksum0_start_pos;
> +       u32 checksum0_end_pos;
> +       u32 checksum1_start_pos;
> +       u32 checksum1_end_pos;
> +       u32 checksum0_result;
> +       u32 checksum1_result;
> +       u32 reserved_0x035C;
> +       u32 dpu_sts[18];
> +       u32 reserved_0x03A8_0x03AC[2];
> +       u32 dpu_fbc_cfg0;
> +       u32 dpu_fbc_cfg1;
> +       u32 reserved_0x03B8_0x03EC[14];
> +       u32 rf_ram_addr;
> +       u32 rf_ram_rdata_low;
> +       u32 rf_ram_rdata_high;
> +       u32 reserved_0x03FC_0x07FC[257];
> +       u32 mmu_en;
> +       u32 mmu_update;
> +       u32 mmu_min_vpn;
> +       u32 mmu_vpn_range;
> +       u32 mmu_pt_addr;
> +       u32 mmu_default_page;
> +       u32 mmu_vaor_addr_rd;
> +       u32 mmu_vaor_addr_wr;
> +       u32 mmu_inv_addr_rd;
> +       u32 mmu_inv_addr_wr;
> +       u32 mmu_uns_addr_rd;
> +       u32 mmu_uns_addr_wr;
> +       u32 mmu_miss_cnt;
> +       u32 mmu_pt_update_qos;
> +       u32 mmu_version;
> +       u32 mmu_min_ppn1;
> +       u32 mmu_ppn_range1;
> +       u32 mmu_min_ppn2;
> +       u32 mmu_ppn_range2;
> +       u32 mmu_vpn_paor_rd;
> +       u32 mmu_vpn_paor_wr;
> +       u32 mmu_ppn_paor_rd;
> +       u32 mmu_ppn_paor_wr;
> +       u32 mmu_reg_au_manage;
> +       u32 mmu_page_rd_ch;
> +       u32 mmu_page_wr_ch;
> +       u32 mmu_read_page_cmd_cnt;
> +       u32 mmu_read_page_latency_cnt;
> +       u32 mmu_page_max_latency;
> +};
> +
> +static void dpu_dump(struct dpu_context *ctx)
> +{
> +       u32 *reg = (u32 *)ctx->base;
> +       int i;
> +
> +       pr_info("      0          4          8          C\n");
> +       for (i = 0; i < 256; i += 4) {
> +               pr_info("%04x: 0x%08x 0x%08x 0x%08x 0x%08x\n",
> +                       i * 4, reg[i], reg[i + 1], reg[i + 2], reg[i + 3]);
> +       }
> +}
> +
> +static u32 check_mmu_isr(struct dpu_context *ctx, u32 reg_val)
> +{
> +       struct dpu_reg *reg = (struct dpu_reg *)ctx->base;
> +       u32 mmu_mask = DISPC_INT_MMU_VAOR_RD_MASK |
> +                       DISPC_INT_MMU_VAOR_WR_MASK |
> +                       DISPC_INT_MMU_INV_RD_MASK |
> +                       DISPC_INT_MMU_INV_WR_MASK;
> +       u32 val = reg_val & mmu_mask;
> +
> +       if (val) {
> +               pr_err("--- iommu interrupt err: 0x%04x ---\n", val);
> +
> +               pr_err("iommu invalid read error, addr: 0x%08x\n",
> +                       reg->mmu_inv_addr_rd);
> +               pr_err("iommu invalid write error, addr: 0x%08x\n",
> +                       reg->mmu_inv_addr_wr);
> +               pr_err("iommu va out of range read error, addr: 0x%08x\n",
> +                       reg->mmu_vaor_addr_rd);
> +               pr_err("iommu va out of range write error, addr: 0x%08x\n",
> +                       reg->mmu_vaor_addr_wr);
> +               pr_err("BUG: iommu failure at %s:%d/%s()!\n",
> +                       __FILE__, __LINE__, __func__);
> +
> +               dpu_dump(ctx);
> +       }
> +
> +       return val;
> +}
> +
> +static void dpu_clean_all(struct dpu_context *ctx)
> +{
> +       int i;
> +       struct dpu_reg *reg = (struct dpu_reg *)ctx->base;
> +
> +       for (i = 0; i < 8; i++)
> +               reg->layers[i].ctrl = 0;
> +}
> +
> +static u32 dpu_isr(struct dpu_context *ctx)
> +{
> +       struct dpu_reg *reg = (struct dpu_reg *)ctx->base;
> +       u32 reg_val, int_mask = 0;
> +
> +       reg_val = reg->dpu_int_sts;
> +
> +       /* disable err interrupt */
> +       if (reg_val & DISPC_INT_ERR_MASK)
> +               int_mask |= DISPC_INT_ERR_MASK;
> +
> +       /* dpu update done isr */
> +       if (reg_val & DISPC_INT_UPDATE_DONE_MASK) {
> +               ctx->evt_update = true;
> +               wake_up_interruptible_all(&ctx->wait_queue);
> +       }
> +
> +       /* dpu stop done isr */
> +       if (reg_val & DISPC_INT_DONE_MASK) {
> +               ctx->evt_stop = true;
> +               wake_up_interruptible_all(&ctx->wait_queue);
> +       }
> +
> +       /* dpu ifbc payload error isr */
> +       if (reg_val & DISPC_INT_FBC_PLD_ERR_MASK) {
> +               int_mask |= DISPC_INT_FBC_PLD_ERR_MASK;
> +               pr_err("dpu ifbc payload error\n");
> +       }
> +
> +       /* dpu ifbc header error isr */
> +       if (reg_val & DISPC_INT_FBC_HDR_ERR_MASK) {
> +               int_mask |= DISPC_INT_FBC_HDR_ERR_MASK;
> +               pr_err("dpu ifbc header error\n");
> +       }
> +
> +       int_mask |= check_mmu_isr(ctx, reg_val);
> +
> +       reg->dpu_int_clr = reg_val;
> +       reg->dpu_int_en &= ~int_mask;

Also, not coding style. Use readl/writel{_relaxed}. This is fragile
because the compiler has a lot of freedom in what it can do here
including reordering the accesses, changing the access size or
skipping the register access altogether. I don't think the latter
would happen in this case, but if a read has side effects such as
causing bits to clear you'll see problems.

> +
> +       return reg_val;
> +}
> +
> +static int dpu_wait_stop_done(struct dpu_context *ctx)
> +{
> +       int rc;
> +
> +       if (ctx->stopped)
> +               return 0;
> +
> +       rc = wait_event_interruptible_timeout(ctx->wait_queue, ctx->evt_stop,
> +                                              msecs_to_jiffies(500));
> +       ctx->evt_stop = false;
> +
> +       ctx->stopped = true;
> +
> +       if (!rc) {
> +               pr_err("dpu wait for stop done time out!\n");
> +               return -ETIMEDOUT;
> +       }
> +
> +       return 0;
> +}
> +
> +static int dpu_wait_update_done(struct dpu_context *ctx)
> +{
> +       int rc;
> +
> +       ctx->evt_update = false;
> +
> +       rc = wait_event_interruptible_timeout(ctx->wait_queue, ctx->evt_update,
> +                                              msecs_to_jiffies(500));
> +
> +       if (!rc) {
> +               pr_err("dpu wait for reg update done time out!\n");
> +               return -ETIMEDOUT;
> +       }
> +
> +       return 0;
> +}
> +
> +static void dpu_stop(struct dpu_context *ctx)
> +{
> +       struct dpu_reg *reg = (struct dpu_reg *)ctx->base;
> +
> +       if (ctx->stopped)
> +               return;
> +
> +       if (ctx->if_type == SPRD_DISPC_IF_DPI)
> +               reg->dpu_ctrl |= BIT(1);
> +
> +       dpu_wait_stop_done(ctx);
> +
> +       pr_info("dpu stop\n");
> +}
> +
> +static void dpu_run(struct dpu_context *ctx)
> +{
> +       struct dpu_reg *reg = (struct dpu_reg *)ctx->base;
> +
> +       if (!ctx->stopped)
> +               return;
> +
> +       reg->dpu_ctrl |= BIT(0);
> +
> +       ctx->stopped = false;
> +
> +       pr_info("dpu run\n");
> +}
> +
> +static int dpu_init(struct dpu_context *ctx)
> +{
> +       struct dpu_reg *reg = (struct dpu_reg *)ctx->base;
> +       u32 size;
> +
> +       reg->bg_color = 0;
> +
> +       size = (ctx->vm.vactive << 16) | ctx->vm.hactive;
> +       reg->panel_size = size;
> +       reg->blend_size = size;
> +
> +       reg->dpu_cfg0 = BIT(4) | BIT(5);
> +
> +       reg->dpu_cfg1 = 0x004466da;
> +       reg->dpu_cfg2 = 0;
> +
> +       if (ctx->stopped)
> +               dpu_clean_all(ctx);
> +
> +       reg->mmu_en = 0;
> +       reg->mmu_min_ppn1 = 0;
> +       reg->mmu_ppn_range1 = 0xffff;
> +       reg->mmu_min_ppn2 = 0;
> +       reg->mmu_ppn_range2 = 0xffff;
> +       reg->mmu_vpn_range = 0x1ffff;
> +
> +       reg->dpu_int_clr = 0xffff;
> +
> +       init_waitqueue_head(&ctx->wait_queue);
> +
> +       return 0;
> +}
> +
> +static void dpu_fini(struct dpu_context *ctx)
> +{
> +       struct dpu_reg *reg = (struct dpu_reg *)ctx->base;
> +
> +       reg->dpu_int_en = 0;
> +       reg->dpu_int_clr = 0xff;
> +}
> +
> +enum {
> +       DPU_LAYER_FORMAT_YUV422_2PLANE,
> +       DPU_LAYER_FORMAT_YUV420_2PLANE,
> +       DPU_LAYER_FORMAT_YUV420_3PLANE,
> +       DPU_LAYER_FORMAT_ARGB8888,
> +       DPU_LAYER_FORMAT_RGB565,
> +       DPU_LAYER_FORMAT_XFBC_ARGB8888 = 8,
> +       DPU_LAYER_FORMAT_XFBC_RGB565,
> +       DPU_LAYER_FORMAT_MAX_TYPES,
> +};
> +
> +enum {
> +       DPU_LAYER_ROTATION_0,
> +       DPU_LAYER_ROTATION_90,
> +       DPU_LAYER_ROTATION_180,
> +       DPU_LAYER_ROTATION_270,
> +       DPU_LAYER_ROTATION_0_M,
> +       DPU_LAYER_ROTATION_90_M,
> +       DPU_LAYER_ROTATION_180_M,
> +       DPU_LAYER_ROTATION_270_M,
> +};
> +
> +static u32 to_dpu_rotation(u32 angle)
> +{
> +       u32 rot = DPU_LAYER_ROTATION_0;
> +
> +       switch (angle) {
> +       case 0:
> +       case DRM_MODE_ROTATE_0:
> +               rot = DPU_LAYER_ROTATION_0;
> +               break;
> +       case DRM_MODE_ROTATE_90:
> +               rot = DPU_LAYER_ROTATION_90;
> +               break;
> +       case DRM_MODE_ROTATE_180:
> +               rot = DPU_LAYER_ROTATION_180;
> +               break;
> +       case DRM_MODE_ROTATE_270:
> +               rot = DPU_LAYER_ROTATION_270;
> +               break;
> +       case DRM_MODE_REFLECT_Y:
> +               rot = DPU_LAYER_ROTATION_180_M;
> +               break;
> +       case (DRM_MODE_REFLECT_Y | DRM_MODE_ROTATE_90):
> +               rot = DPU_LAYER_ROTATION_90_M;
> +               break;
> +       case DRM_MODE_REFLECT_X:
> +               rot = DPU_LAYER_ROTATION_0_M;
> +               break;
> +       case (DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_90):
> +               rot = DPU_LAYER_ROTATION_270_M;
> +               break;
> +       default:
> +               pr_err("rotation convert unsupport angle (drm)= 0x%x\n", angle);
> +               break;
> +       }
> +
> +       return rot;
> +}
> +
> +static u32 dpu_img_ctrl(u32 format, u32 blending, u32 rotation)
> +{
> +       int reg_val = 0;
> +
> +       /* layer enable */
> +       reg_val |= BIT(0);
> +
> +       switch (format) {
> +       case DRM_FORMAT_BGRA8888:
> +               /* BGRA8888 -> ARGB8888 */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B3B2B1B0 << 8;
> +               reg_val |= (DPU_LAYER_FORMAT_ARGB8888 << 4);
> +               break;
> +       case DRM_FORMAT_RGBX8888:
> +       case DRM_FORMAT_RGBA8888:
> +               /* RGBA8888 -> ABGR8888 */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B3B2B1B0 << 8;
> +               /* FALLTHRU */
> +       case DRM_FORMAT_ABGR8888:
> +               /* rb switch */
> +               reg_val |= BIT(10);
> +               /* FALLTHRU */
> +       case DRM_FORMAT_ARGB8888:
> +               reg_val |= (DPU_LAYER_FORMAT_ARGB8888 << 4);
> +               break;
> +       case DRM_FORMAT_XBGR8888:
> +               /* rb switch */
> +               reg_val |= BIT(10);
> +               /* FALLTHRU */
> +       case DRM_FORMAT_XRGB8888:
> +               reg_val |= (DPU_LAYER_FORMAT_ARGB8888 << 4);
> +               break;
> +       case DRM_FORMAT_BGR565:
> +               /* rb switch */
> +               reg_val |= BIT(10);
> +               /* FALLTHRU */
> +       case DRM_FORMAT_RGB565:
> +               reg_val |= (DPU_LAYER_FORMAT_RGB565 << 4);
> +               break;
> +       case DRM_FORMAT_NV12:
> +               /* 2-Lane: Yuv420 */
> +               reg_val |= DPU_LAYER_FORMAT_YUV420_2PLANE << 4;
> +               /* Y endian */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B0B1B2B3 << 8;
> +               /* UV endian */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B0B1B2B3 << 10;
> +               break;
> +       case DRM_FORMAT_NV21:
> +               /* 2-Lane: Yuv420 */
> +               reg_val |= DPU_LAYER_FORMAT_YUV420_2PLANE << 4;
> +               /* Y endian */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B0B1B2B3 << 8;
> +               /* UV endian */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B3B2B1B0 << 10;
> +               break;
> +       case DRM_FORMAT_NV16:
> +               /* 2-Lane: Yuv422 */
> +               reg_val |= DPU_LAYER_FORMAT_YUV422_2PLANE << 4;
> +               /* Y endian */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B3B2B1B0 << 8;
> +               /* UV endian */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B3B2B1B0 << 10;
> +               break;
> +       case DRM_FORMAT_NV61:
> +               /* 2-Lane: Yuv422 */
> +               reg_val |= DPU_LAYER_FORMAT_YUV422_2PLANE << 4;
> +               /* Y endian */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B0B1B2B3 << 8;
> +               /* UV endian */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B0B1B2B3 << 10;
> +               break;
> +       case DRM_FORMAT_YUV420:
> +               reg_val |= DPU_LAYER_FORMAT_YUV420_3PLANE << 4;
> +               /* Y endian */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B0B1B2B3 << 8;
> +               /* UV endian */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B0B1B2B3 << 10;
> +               break;
> +       case DRM_FORMAT_YVU420:
> +               reg_val |= DPU_LAYER_FORMAT_YUV420_3PLANE << 4;
> +               /* Y endian */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B0B1B2B3 << 8;
> +               /* UV endian */
> +               reg_val |= SPRD_IMG_DATA_ENDIAN_B3B2B1B0 << 10;
> +               break;
> +       default:
> +               pr_err("error: invalid format %c%c%c%c\n", format,
> +                                               format >> 8,
> +                                               format >> 16,
> +                                               format >> 24);
> +               break;
> +       }
> +
> +       switch (blending) {
> +       case DRM_MODE_BLEND_PIXEL_NONE:
> +               /* don't do blending, maybe RGBX */
> +               /* alpha mode select - layer alpha */
> +               reg_val |= BIT(2);
> +               break;
> +       case DRM_MODE_BLEND_COVERAGE:
> +               /* alpha mode select - combo alpha */
> +               reg_val |= BIT(3);
> +               /*Normal mode*/
> +               reg_val &= (~BIT(16));
> +               break;
> +       case DRM_MODE_BLEND_PREMULTI:
> +               /* alpha mode select - combo alpha */
> +               reg_val |= BIT(3);
> +               /*Pre-mult mode*/
> +               reg_val |= BIT(16);
> +               break;
> +       default:
> +               /* alpha mode select - layer alpha */
> +               reg_val |= BIT(2);
> +               break;
> +       }
> +
> +       rotation = to_dpu_rotation(rotation);
> +       reg_val |= (rotation & 0x7) << 20;
> +
> +       return reg_val;
> +}
> +
> +static void dpu_bgcolor(struct dpu_context *ctx, u32 color)
> +{
> +       struct dpu_reg *reg = (struct dpu_reg *)ctx->base;
> +
> +       if (ctx->if_type == SPRD_DISPC_IF_EDPI)
> +               dpu_wait_stop_done(ctx);
> +
> +       reg->bg_color = color;
> +
> +       dpu_clean_all(ctx);
> +
> +       if ((ctx->if_type == SPRD_DISPC_IF_DPI) && !ctx->stopped) {
> +               reg->dpu_ctrl |= BIT(2);
> +               dpu_wait_update_done(ctx);
> +       } else if (ctx->if_type == SPRD_DISPC_IF_EDPI) {
> +               reg->dpu_ctrl |= BIT(0);
> +               ctx->stopped = false;
> +       }
> +}
> +
> +static void dpu_layer(struct dpu_context *ctx,
> +                   struct sprd_dpu_layer *hwlayer)
> +{
> +       struct dpu_reg *reg = (struct dpu_reg *)ctx->base;
> +       const struct drm_format_info *info;
> +       struct layer_reg *layer;
> +       u32 addr, size, offset;
> +       int i;
> +
> +       layer = &reg->layers[hwlayer->index];
> +       offset = (hwlayer->dst_x & 0xffff) | ((hwlayer->dst_y) << 16);
> +
> +       if (hwlayer->src_w && hwlayer->src_h)
> +               size = (hwlayer->src_w & 0xffff) | ((hwlayer->src_h) << 16);
> +       else
> +               size = (hwlayer->dst_w & 0xffff) | ((hwlayer->dst_h) << 16);
> +
> +       for (i = 0; i < hwlayer->planes; i++) {
> +               addr = hwlayer->addr[i];
> +
> +               if (addr % 16)
> +                       pr_err("layer addr[%d] is not 16 bytes align, it's 0x%08x\n",
> +                               i, addr);
> +               layer->addr[i] = addr;
> +       }
> +
> +       layer->pos = offset;
> +       layer->size = size;
> +       layer->crop_start = (hwlayer->src_y << 16) | hwlayer->src_x;
> +       layer->alpha = hwlayer->alpha;
> +
> +       info = drm_format_info(hwlayer->format);
> +       if (info->cpp[0] == 0) {
> +               pr_err("layer[%d] bytes per pixel is invalid\n", hwlayer->index);
> +               return;
> +       }
> +
> +       if (hwlayer->planes == 3)
> +               /* UV pitch is 1/2 of Y pitch*/
> +               layer->pitch = (hwlayer->pitch[0] / info->cpp[0]) |
> +                               (hwlayer->pitch[0] / info->cpp[0] << 15);
> +       else
> +               layer->pitch = hwlayer->pitch[0] / info->cpp[0];
> +
> +       layer->ctrl = dpu_img_ctrl(hwlayer->format, hwlayer->blending,
> +               hwlayer->rotation);
> +
> +       pr_debug("dst_x = %d, dst_y = %d, dst_w = %d, dst_h = %d\n",
> +                               hwlayer->dst_x, hwlayer->dst_y,
> +                               hwlayer->dst_w, hwlayer->dst_h);
> +       pr_debug("start_x = %d, start_y = %d, start_w = %d, start_h = %d\n",
> +                               hwlayer->src_x, hwlayer->src_y,
> +                               hwlayer->src_w, hwlayer->src_h);
> +}
> +
> +static void dpu_flip(struct dpu_context *ctx,
> +                    struct sprd_dpu_layer layers[], u8 count)
> +{
> +       struct dpu_reg *reg = (struct dpu_reg *)ctx->base;
> +       int i;
> +
> +       /*
> +        * Make sure the dpu is in stop status. DPU_R2P0 has no shadow
> +        * registers in EDPI mode. So the config registers can only be
> +        * updated in the rising edge of DPU_RUN bit.
> +        */
> +       if (ctx->if_type == SPRD_DISPC_IF_EDPI)
> +               dpu_wait_stop_done(ctx);
> +
> +       /* reset the bgcolor to black */
> +       reg->bg_color = 0;
> +
> +       /* disable all the layers */
> +       dpu_clean_all(ctx);
> +
> +       /* start configure dpu layers */
> +       for (i = 0; i < count; i++)
> +               dpu_layer(ctx, &layers[i]);
> +
> +       /* update trigger and wait */
> +       if (ctx->if_type == SPRD_DISPC_IF_DPI) {
> +               if (!ctx->stopped) {
> +                       reg->dpu_ctrl |= BIT(2);
> +                       dpu_wait_update_done(ctx);
> +               }
> +
> +               reg->dpu_int_en |= DISPC_INT_ERR_MASK;
> +
> +       } else if (ctx->if_type == SPRD_DISPC_IF_EDPI) {
> +               reg->dpu_ctrl |= BIT(0);
> +
> +               ctx->stopped = false;
> +       }
> +
> +       /*
> +        * If the following interrupt was disabled in isr,
> +        * re-enable it.
> +        */
> +       reg->dpu_int_en |= DISPC_INT_FBC_PLD_ERR_MASK |
> +                          DISPC_INT_FBC_HDR_ERR_MASK |
> +                          DISPC_INT_MMU_VAOR_RD_MASK |
> +                          DISPC_INT_MMU_VAOR_WR_MASK |
> +                          DISPC_INT_MMU_INV_RD_MASK |
> +                          DISPC_INT_MMU_INV_WR_MASK;
> +}
> +
> +static void dpu_dpi_init(struct dpu_context *ctx)
> +{
> +       struct dpu_reg *reg = (struct dpu_reg *)ctx->base;
> +       u32 int_mask = 0;
> +
> +       if (ctx->if_type == SPRD_DISPC_IF_DPI) {
> +               /* use dpi as interface */
> +               reg->dpu_cfg0 &= ~BIT(0);
> +
> +               /* disable Halt function for SPRD DSI */
> +               reg->dpi_ctrl &= ~BIT(16);
> +
> +               /* select te from external pad */
> +               reg->dpi_ctrl |= BIT(10);
> +
> +               /* set dpi timing */
> +               reg->dpi_h_timing = (ctx->vm.hsync_len << 0) |
> +                                   (ctx->vm.hback_porch << 8) |
> +                                   (ctx->vm.hfront_porch << 20);
> +               reg->dpi_v_timing = (ctx->vm.vsync_len << 0) |
> +                                   (ctx->vm.vback_porch << 8) |
> +                                   (ctx->vm.vfront_porch << 20);
> +               if (ctx->vm.vsync_len + ctx->vm.vback_porch < 32)
> +                       pr_warn("Warning: (vsync + vbp) < 32, "
> +                               "underflow risk!\n");
> +
> +               /* enable dpu update done INT */
> +               int_mask |= DISPC_INT_UPDATE_DONE_MASK;
> +               /* enable dpu DONE  INT */
> +               int_mask |= DISPC_INT_DONE_MASK;
> +               /* enable dpu dpi vsync */
> +               int_mask |= DISPC_INT_DPI_VSYNC_MASK;
> +               /* enable dpu TE INT */
> +               int_mask |= DISPC_INT_TE_MASK;
> +               /* enable underflow err INT */
> +               int_mask |= DISPC_INT_ERR_MASK;
> +               /* enable write back done INT */
> +               int_mask |= DISPC_INT_WB_DONE_MASK;
> +               /* enable write back fail INT */
> +               int_mask |= DISPC_INT_WB_FAIL_MASK;
> +
> +       } else if (ctx->if_type == SPRD_DISPC_IF_EDPI) {
> +               /* use edpi as interface */
> +               reg->dpu_cfg0 |= BIT(0);
> +
> +               /* use external te */
> +               reg->dpi_ctrl |= BIT(10);
> +
> +               /* enable te */
> +               reg->dpi_ctrl |= BIT(8);
> +
> +               /* enable stop DONE INT */
> +               int_mask |= DISPC_INT_DONE_MASK;
> +               /* enable TE INT */
> +               int_mask |= DISPC_INT_TE_MASK;
> +       }
> +
> +       /* enable ifbc payload error INT */
> +       int_mask |= DISPC_INT_FBC_PLD_ERR_MASK;
> +       /* enable ifbc header error INT */
> +       int_mask |= DISPC_INT_FBC_HDR_ERR_MASK;
> +       /* enable iommu va out of range read error INT */
> +       int_mask |= DISPC_INT_MMU_VAOR_RD_MASK;
> +       /* enable iommu va out of range write error INT */
> +       int_mask |= DISPC_INT_MMU_VAOR_WR_MASK;
> +       /* enable iommu invalid read error INT */
> +       int_mask |= DISPC_INT_MMU_INV_RD_MASK;
> +       /* enable iommu invalid write error INT */
> +       int_mask |= DISPC_INT_MMU_INV_WR_MASK;
> +
> +       reg->dpu_int_en = int_mask;
> +}
> +
> +static void enable_vsync(struct dpu_context *ctx)
> +{
> +       struct dpu_reg *reg = (struct dpu_reg *)ctx->base;
> +
> +       reg->dpu_int_en |= DISPC_INT_DPI_VSYNC_MASK;
> +}
> +
> +static void disable_vsync(struct dpu_context *ctx)
> +{
> +       struct dpu_reg *reg = (struct dpu_reg *)ctx->base;
> +
> +       reg->dpu_int_en &= ~DISPC_INT_DPI_VSYNC_MASK;
> +}
> +
> +static const u32 primary_fmts[] = {
> +       DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888,
> +       DRM_FORMAT_ARGB8888, DRM_FORMAT_ABGR8888,
> +       DRM_FORMAT_RGBA8888, DRM_FORMAT_BGRA8888,
> +       DRM_FORMAT_RGBX8888, DRM_FORMAT_BGRX8888,
> +       DRM_FORMAT_RGB565, DRM_FORMAT_BGR565,
> +       DRM_FORMAT_NV12, DRM_FORMAT_NV21,
> +       DRM_FORMAT_NV16, DRM_FORMAT_NV61,
> +       DRM_FORMAT_YUV420, DRM_FORMAT_YVU420,
> +};
> +
> +static int dpu_capability(struct dpu_context *ctx,
> +                       struct dpu_capability *cap)
> +{
> +       if (!cap)
> +               return -EINVAL;
> +
> +       cap->max_layers = 6;
> +       cap->fmts_ptr = primary_fmts;
> +       cap->fmts_cnt = ARRAY_SIZE(primary_fmts);
> +
> +       return 0;
> +}
> +
> +const struct dpu_core_ops sharkl3_dpu_core_ops = {
> +       .init = dpu_init,
> +       .fini = dpu_fini,
> +       .run = dpu_run,
> +       .stop = dpu_stop,
> +       .isr = dpu_isr,
> +       .ifconfig = dpu_dpi_init,
> +       .capability = dpu_capability,
> +       .flip = dpu_flip,
> +       .bg_color = dpu_bgcolor,
> +       .enable_vsync = enable_vsync,
> +       .disable_vsync = disable_vsync,
> +};
> diff --git a/drivers/gpu/drm/sprd/sprd_dpu.c b/drivers/gpu/drm/sprd/sprd_dpu.c
> new file mode 100644
> index 0000000..f122b0e
> --- /dev/null
> +++ b/drivers/gpu/drm/sprd/sprd_dpu.c
> @@ -0,0 +1,586 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Unisoc Inc.
> + */
> +
> +#include <linux/component.h>
> +#include <linux/dma-buf.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_gem_framebuffer_helper.h>
> +#include <drm/drm_plane_helper.h>
> +
> +#include "sprd_drm.h"
> +#include "sprd_dpu.h"
> +
> +struct sprd_plane {
> +       struct drm_plane plane;
> +       u32 index;
> +};
> +
> +static int sprd_dpu_init(struct sprd_dpu *dpu);
> +static int sprd_dpu_fini(struct sprd_dpu *dpu);
> +
> +static inline struct sprd_plane *to_sprd_plane(struct drm_plane *plane)
> +{
> +       return container_of(plane, struct sprd_plane, plane);
> +}
> +
> +static int sprd_plane_atomic_check(struct drm_plane *plane,
> +                                 struct drm_plane_state *state)
> +{
> +       DRM_DEBUG("%s()\n", __func__);
> +
> +       return 0;
> +}
> +
> +static void sprd_plane_atomic_update(struct drm_plane *plane,
> +                                   struct drm_plane_state *old_state)
> +{
> +       struct drm_plane_state *state = plane->state;
> +       struct drm_framebuffer *fb = plane->state->fb;
> +       struct drm_gem_cma_object *cma_obj;
> +       struct sprd_plane *p = to_sprd_plane(plane);
> +       struct sprd_dpu *dpu = crtc_to_dpu(plane->state->crtc);
> +       struct sprd_dpu_layer *layer = &dpu->layers[p->index];
> +       int i;
> +
> +       if (plane->state->crtc->state->active_changed) {
> +               DRM_DEBUG("resume or suspend, no need to update plane\n");
> +               return;
> +       }
> +
> +       layer->index = p->index;
> +       layer->src_x = state->src_x >> 16;
> +       layer->src_y = state->src_y >> 16;
> +       layer->src_w = state->src_w >> 16;
> +       layer->src_h = state->src_h >> 16;
> +       layer->dst_x = state->crtc_x;
> +       layer->dst_y = state->crtc_y;
> +       layer->dst_w = state->crtc_w;
> +       layer->dst_h = state->crtc_h;
> +       layer->alpha = state->alpha;
> +       layer->blending = state->pixel_blend_mode;
> +       layer->rotation = state->rotation;
> +       layer->planes = fb->format->num_planes;
> +       layer->format = fb->format->format;
> +
> +       DRM_DEBUG("%s() alpha = %u, blending = %u, rotation = %u\n",
> +                 __func__, layer->alpha, layer->blending, layer->rotation);
> +
> +       for (i = 0; i < layer->planes; i++) {
> +               cma_obj = drm_fb_cma_get_gem_obj(fb, i);
> +               layer->addr[i] = cma_obj->paddr + fb->offsets[i];
> +               layer->pitch[i] = fb->pitches[i];
> +       }
> +
> +       dpu->pending_planes++;
> +}
> +
> +static void sprd_plane_atomic_disable(struct drm_plane *plane,
> +                                    struct drm_plane_state *old_state)
> +{
> +       struct sprd_plane *p = to_sprd_plane(plane);
> +
> +       /*
> +        * NOTE:
> +        * The dpu->core->flip() will disable all the planes each time.
> +        * So there is no need to impliment the atomic_disable() function.
> +        * But this function can not be removed, because it will change
> +        * to call atomic_update() callback instead. Which will cause
> +        * kernel panic in sprd_plane_atomic_update().
> +        *
> +        * We do nothing here but just print a debug log.
> +        */
> +       DRM_DEBUG("%s() layer_id = %u\n", __func__, p->index);
> +}
> +
> +static int sprd_plane_create_properties(struct sprd_plane *p, int index)
> +{
> +       unsigned int supported_modes = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
> +                                      BIT(DRM_MODE_BLEND_PREMULTI) |
> +                                      BIT(DRM_MODE_BLEND_COVERAGE);
> +
> +       /* create rotation property */
> +       drm_plane_create_rotation_property(&p->plane,
> +                                          DRM_MODE_ROTATE_0,
> +                                          DRM_MODE_ROTATE_MASK |
> +                                          DRM_MODE_REFLECT_MASK);
> +
> +       /* create alpha property */
> +       drm_plane_create_alpha_property(&p->plane);
> +
> +       /* create blend mode property */
> +       drm_plane_create_blend_mode_property(&p->plane, supported_modes);
> +
> +       /* create zpos property */
> +       drm_plane_create_zpos_immutable_property(&p->plane, index);
> +
> +       return 0;
> +}
> +
> +static const struct drm_plane_helper_funcs sprd_plane_helper_funcs = {
> +       .atomic_check = sprd_plane_atomic_check,
> +       .atomic_update = sprd_plane_atomic_update,
> +       .atomic_disable = sprd_plane_atomic_disable,
> +};
> +
> +static const struct drm_plane_funcs sprd_plane_funcs = {
> +       .update_plane = drm_atomic_helper_update_plane,
> +       .disable_plane  = drm_atomic_helper_disable_plane,
> +       .destroy = drm_plane_cleanup,
> +       .reset = drm_atomic_helper_plane_reset,
> +       .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> +       .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> +};
> +
> +static struct drm_plane *sprd_plane_init(struct drm_device *drm,
> +                                       struct sprd_dpu *dpu)
> +{
> +       struct drm_plane *primary = NULL;
> +       struct sprd_plane *p = NULL;
> +       struct dpu_capability cap = {};
> +       int err, i;
> +
> +       if (dpu->core && dpu->core->capability)
> +               dpu->core->capability(&dpu->ctx, &cap);
> +
> +       dpu->layers = devm_kcalloc(drm->dev, cap.max_layers,
> +                                 sizeof(struct sprd_dpu_layer), GFP_KERNEL);
> +       if (!dpu->layers)
> +               return ERR_PTR(-ENOMEM);
> +
> +       for (i = 0; i < cap.max_layers; i++) {
> +
> +               p = devm_kzalloc(drm->dev, sizeof(*p), GFP_KERNEL);
> +               if (!p)
> +                       return ERR_PTR(-ENOMEM);
> +
> +               err = drm_universal_plane_init(drm, &p->plane, 1,
> +                                              &sprd_plane_funcs, cap.fmts_ptr,
> +                                              cap.fmts_cnt, NULL,
> +                                              DRM_PLANE_TYPE_PRIMARY, NULL);
> +               if (err) {
> +                       DRM_ERROR("fail to init primary plane\n");
> +                       return ERR_PTR(err);
> +               }
> +
> +               drm_plane_helper_add(&p->plane, &sprd_plane_helper_funcs);
> +
> +               sprd_plane_create_properties(p, i);
> +
> +               p->index = i;
> +               if (i == 0)
> +                       primary = &p->plane;
> +       }
> +
> +       if (p)
> +               DRM_INFO("dpu plane init ok\n");
> +
> +       return primary;
> +}
> +
> +static void sprd_crtc_mode_set_nofb(struct drm_crtc *crtc)
> +{
> +       struct sprd_dpu *dpu = crtc_to_dpu(crtc);
> +
> +       if ((dpu->mode->hdisplay == dpu->mode->htotal) ||
> +           (dpu->mode->vdisplay == dpu->mode->vtotal))
> +               dpu->ctx.if_type = SPRD_DISPC_IF_EDPI;
> +       else
> +               dpu->ctx.if_type = SPRD_DISPC_IF_DPI;
> +}
> +
> +static enum drm_mode_status sprd_crtc_mode_valid(struct drm_crtc *crtc,
> +                                       const struct drm_display_mode *mode)
> +{
> +       struct sprd_dpu *dpu = crtc_to_dpu(crtc);
> +
> +       DRM_INFO("%s() mode: "DRM_MODE_FMT"\n", __func__, DRM_MODE_ARG(mode));
> +
> +       if (mode->type & DRM_MODE_TYPE_DEFAULT)
> +               dpu->mode = (struct drm_display_mode *)mode;
> +
> +       if (mode->type & DRM_MODE_TYPE_PREFERRED) {
> +               dpu->mode = (struct drm_display_mode *)mode;
> +               drm_display_mode_to_videomode(dpu->mode, &dpu->ctx.vm);
> +       }
> +
> +       return MODE_OK;
> +}
> +
> +static void sprd_crtc_atomic_enable(struct drm_crtc *crtc,
> +                                  struct drm_crtc_state *old_state)
> +{
> +       struct sprd_dpu *dpu = crtc_to_dpu(crtc);
> +
> +       DRM_INFO("%s()\n", __func__);
> +
> +       sprd_dpu_init(dpu);
> +
> +       enable_irq(dpu->ctx.irq);
> +
> +       drm_crtc_vblank_on(crtc);
> +}
> +
> +static void sprd_crtc_atomic_disable(struct drm_crtc *crtc,
> +                                   struct drm_crtc_state *old_state)
> +{
> +       struct sprd_dpu *dpu = crtc_to_dpu(crtc);
> +       struct drm_device *drm = dpu->crtc.dev;
> +
> +       DRM_INFO("%s()\n", __func__);
> +
> +       drm_crtc_vblank_off(crtc);
> +
> +       disable_irq(dpu->ctx.irq);
> +
> +       sprd_dpu_fini(dpu);
> +
> +       spin_lock_irq(&drm->event_lock);
> +       if (crtc->state->event) {
> +               drm_crtc_send_vblank_event(crtc, crtc->state->event);
> +               crtc->state->event = NULL;
> +       }
> +       spin_unlock_irq(&drm->event_lock);
> +}
> +
> +static int sprd_crtc_atomic_check(struct drm_crtc *crtc,
> +                                struct drm_crtc_state *state)
> +{
> +       DRM_DEBUG("%s()\n", __func__);
> +
> +       return 0;
> +}
> +
> +static void sprd_crtc_atomic_begin(struct drm_crtc *crtc,
> +                                 struct drm_crtc_state *old_state)
> +{
> +       struct sprd_dpu *dpu = crtc_to_dpu(crtc);
> +
> +       DRM_DEBUG("%s()\n", __func__);
> +
> +       memset(dpu->layers, 0, sizeof(*dpu->layers) * dpu->pending_planes);
> +
> +       dpu->pending_planes = 0;
> +}
> +
> +static void sprd_crtc_atomic_flush(struct drm_crtc *crtc,
> +                                 struct drm_crtc_state *old_state)
> +
> +{
> +       struct sprd_dpu *dpu = crtc_to_dpu(crtc);
> +       struct drm_device *drm = dpu->crtc.dev;
> +
> +       DRM_DEBUG("%s()\n", __func__);
> +
> +       if (dpu->core && dpu->core->flip && dpu->pending_planes)
> +               dpu->core->flip(&dpu->ctx, dpu->layers, dpu->pending_planes);
> +
> +       spin_lock_irq(&drm->event_lock);
> +       if (crtc->state->event) {
> +               drm_crtc_send_vblank_event(crtc, crtc->state->event);
> +               crtc->state->event = NULL;
> +       }
> +       spin_unlock_irq(&drm->event_lock);
> +}
> +
> +static int sprd_crtc_enable_vblank(struct drm_crtc *crtc)
> +{
> +       struct sprd_dpu *dpu = crtc_to_dpu(crtc);
> +
> +       DRM_DEBUG("%s()\n", __func__);
> +
> +       if (dpu->core && dpu->core->enable_vsync)
> +               dpu->core->enable_vsync(&dpu->ctx);
> +
> +       return 0;
> +}
> +
> +static void sprd_crtc_disable_vblank(struct drm_crtc *crtc)
> +{
> +       struct sprd_dpu *dpu = crtc_to_dpu(crtc);
> +
> +       DRM_DEBUG("%s()\n", __func__);
> +
> +       if (dpu->core && dpu->core->disable_vsync)
> +               dpu->core->disable_vsync(&dpu->ctx);
> +}
> +
> +static int sprd_crtc_create_properties(struct drm_crtc *crtc)
> +{
> +       struct sprd_dpu *dpu = crtc_to_dpu(crtc);
> +       struct drm_device *drm = dpu->crtc.dev;
> +       struct drm_property *prop;
> +       struct drm_property_blob *blob;
> +       size_t blob_size;
> +
> +       blob_size = strlen(dpu->ctx.version) + 1;
> +
> +       blob = drm_property_create_blob(dpu->crtc.dev, blob_size,
> +                       dpu->ctx.version);
> +       if (IS_ERR(blob)) {
> +               DRM_ERROR("drm_property_create_blob dpu version failed\n");
> +               return PTR_ERR(blob);
> +       }
> +
> +       /* create dpu version property */
> +       prop = drm_property_create(drm,
> +               DRM_MODE_PROP_IMMUTABLE | DRM_MODE_PROP_BLOB,
> +               "dpu version", 0);
> +       if (!prop) {
> +               DRM_ERROR("drm_property_create dpu version failed\n");
> +               return -ENOMEM;
> +       }
> +       drm_object_attach_property(&crtc->base, prop, blob->base.id);
> +
> +       return 0;
> +}
> +
> +static const struct drm_crtc_helper_funcs sprd_crtc_helper_funcs = {
> +       .mode_set_nofb  = sprd_crtc_mode_set_nofb,
> +       .mode_valid     = sprd_crtc_mode_valid,
> +       .atomic_check   = sprd_crtc_atomic_check,
> +       .atomic_begin   = sprd_crtc_atomic_begin,
> +       .atomic_flush   = sprd_crtc_atomic_flush,
> +       .atomic_enable  = sprd_crtc_atomic_enable,
> +       .atomic_disable = sprd_crtc_atomic_disable,
> +};
> +
> +static const struct drm_crtc_funcs sprd_crtc_funcs = {
> +       .destroy        = drm_crtc_cleanup,
> +       .set_config     = drm_atomic_helper_set_config,
> +       .page_flip      = drm_atomic_helper_page_flip,
> +       .reset          = drm_atomic_helper_crtc_reset,
> +       .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> +       .atomic_destroy_state   = drm_atomic_helper_crtc_destroy_state,
> +       .enable_vblank  = sprd_crtc_enable_vblank,
> +       .disable_vblank = sprd_crtc_disable_vblank,
> +};
> +
> +static int sprd_crtc_init(struct drm_device *drm, struct drm_crtc *crtc,
> +                        struct drm_plane *primary)
> +{
> +       struct device_node *port;
> +       int err;
> +
> +       /*
> +        * set crtc port so that drm_of_find_possible_crtcs call works
> +        */
> +       port = of_parse_phandle(drm->dev->of_node, "ports", 0);
> +       if (!port) {
> +               DRM_ERROR("find 'ports' phandle of %s failed\n",
> +                         drm->dev->of_node->full_name);
> +               return -EINVAL;
> +       }
> +       of_node_put(port);
> +       crtc->port = port;
> +
> +       err = drm_crtc_init_with_planes(drm, crtc, primary, NULL,
> +                                       &sprd_crtc_funcs, NULL);
> +       if (err) {
> +               DRM_ERROR("failed to init crtc.\n");
> +               return err;
> +       }
> +
> +       drm_mode_crtc_set_gamma_size(crtc, 256);
> +
> +       drm_crtc_helper_add(crtc, &sprd_crtc_helper_funcs);
> +
> +       sprd_crtc_create_properties(crtc);
> +
> +       DRM_INFO("%s() ok\n", __func__);
> +       return 0;
> +}
> +
> +static int sprd_dpu_init(struct sprd_dpu *dpu)
> +{
> +       struct dpu_context *ctx = &dpu->ctx;
> +
> +       if (dpu->core && dpu->core->init)
> +               dpu->core->init(ctx);
> +       if (dpu->core && dpu->core->ifconfig)
> +               dpu->core->ifconfig(ctx);
> +
> +       return 0;
> +}
> +
> +static int sprd_dpu_fini(struct sprd_dpu *dpu)
> +{
> +       struct dpu_context *ctx = &dpu->ctx;
> +
> +       if (dpu->core && dpu->core->fini)
> +               dpu->core->fini(ctx);
> +
> +       return 0;
> +}
> +
> +static irqreturn_t sprd_dpu_isr(int irq, void *data)
> +{
> +       struct sprd_dpu *dpu = data;
> +       struct dpu_context *ctx = &dpu->ctx;
> +       u32 int_mask = 0;
> +
> +       if (dpu->core && dpu->core->isr)
> +               int_mask = dpu->core->isr(ctx);
> +
> +       if (int_mask & DISPC_INT_ERR_MASK)
> +               DRM_WARN("Warning: dpu underflow!\n");
> +
> +       if ((int_mask & DISPC_INT_DPI_VSYNC_MASK))
> +               drm_crtc_handle_vblank(&dpu->crtc);
> +
> +       return IRQ_HANDLED;
> +}
> +
> +static int sprd_dpu_irq_request(struct sprd_dpu *dpu)
> +{
> +       int err;
> +       int irq_num;
> +
> +       irq_num = irq_of_parse_and_map(dpu->dev.of_node, 0);

Use platform_get_irq instead.

> +       if (!irq_num) {
> +               DRM_ERROR("error: dpu parse irq num failed\n");
> +               return -EINVAL;
> +       }
> +       DRM_INFO("dpu irq_num = %d\n", irq_num);
> +
> +       irq_set_status_flags(irq_num, IRQ_NOAUTOEN);

I think you shouldn't need this. Make sure you've disabled interrupts
in the h/w first or that the handler can handle it if you haven't.

> +       err = devm_request_irq(&dpu->dev, irq_num, sprd_dpu_isr,
> +                                       0, "DISPC", dpu);
> +       if (err) {
> +               DRM_ERROR("error: dpu request irq failed\n");
> +               return -EINVAL;
> +       }
> +       dpu->ctx.irq = irq_num;
> +
> +       return 0;
> +}
> +
> +static int sprd_dpu_bind(struct device *dev, struct device *master, void *data)
> +{
> +       struct drm_device *drm = data;
> +       struct sprd_dpu *dpu = dev_get_drvdata(dev);
> +       struct drm_plane *plane;
> +       int err;
> +
> +       DRM_INFO("%s()\n", __func__);
> +
> +       plane = sprd_plane_init(drm, dpu);
> +       if (IS_ERR_OR_NULL(plane)) {
> +               err = PTR_ERR(plane);
> +               return err;
> +       }
> +
> +       err = sprd_crtc_init(drm, &dpu->crtc, plane);
> +       if (err)
> +               return err;
> +
> +       sprd_dpu_irq_request(dpu);
> +
> +       return 0;
> +}
> +
> +static void sprd_dpu_unbind(struct device *dev, struct device *master,
> +       void *data)
> +{
> +       struct sprd_dpu *dpu = dev_get_drvdata(dev);
> +
> +       DRM_INFO("%s()\n", __func__);
> +
> +       drm_crtc_cleanup(&dpu->crtc);
> +}
> +
> +static const struct component_ops dpu_component_ops = {
> +       .bind = sprd_dpu_bind,
> +       .unbind = sprd_dpu_unbind,
> +};
> +
> +static int sprd_dpu_context_init(struct sprd_dpu *dpu,
> +                               struct device_node *np)
> +{
> +       struct resource r;
> +       struct dpu_context *ctx = &dpu->ctx;
> +
> +       if (of_address_to_resource(np, 0, &r)) {
> +               DRM_ERROR("parse dt base address failed\n");
> +               return -ENODEV;
> +       }
> +       ctx->base = (unsigned long)ioremap(r.start,
> +                                       resource_size(&r));
> +       if (ctx->base == 0) {
> +               DRM_ERROR("ioremap base address failed\n");
> +               return -EFAULT;
> +       }
> +
> +       return 0;
> +}
> +
> +static const struct sprd_dpu_ops sharkl3_dpu = {
> +       .core = &sharkl3_dpu_core_ops,
> +};
> +
> +static const struct of_device_id dpu_match_table[] = {
> +       { .compatible = "sprd,sharkl3-dpu",
> +         .data = &sharkl3_dpu },
> +       { /* sentinel */ },
> +};
> +
> +static int sprd_dpu_probe(struct platform_device *pdev)
> +{
> +       struct device_node *np = pdev->dev.of_node;
> +       const struct of_device_id *of_id =
> +               of_match_node(dpu_match_table, np);

Don't need this.

> +       const struct sprd_dpu_ops *pdata;
> +       struct sprd_dpu *dpu;
> +       int ret;
> +
> +       dpu = devm_kzalloc(&pdev->dev, sizeof(*dpu), GFP_KERNEL);
> +       if (!dpu)
> +               return -ENOMEM;
> +
> +       pdata = of_device_get_match_data(&pdev->dev);
> +       if (pdata) {
> +               dpu->core = pdata->core;
> +               dpu->ctx.version = "dpu-r2p0";
> +       } else {
> +               DRM_ERROR("Can't get %s ops data\n", of_id->name);
> +               return -EINVAL;
> +       }
> +
> +       ret = sprd_dpu_context_init(dpu, np);
> +       if (ret)
> +               return ret;
> +
> +       platform_set_drvdata(pdev, dpu);
> +
> +       return component_add(&pdev->dev, &dpu_component_ops);
> +}
> +
> +static int sprd_dpu_remove(struct platform_device *pdev)
> +{
> +       component_del(&pdev->dev, &dpu_component_ops);
> +       return 0;
> +}
> +
> +struct platform_driver sprd_dpu_driver = {
> +       .probe = sprd_dpu_probe,
> +       .remove = sprd_dpu_remove,
> +       .driver = {
> +               .name = "sprd-dpu-drv",
> +               .of_match_table = dpu_match_table,
> +       },
> +};
> +
> +MODULE_AUTHOR("Leon He <leon.he@...soc.com>");
> +MODULE_AUTHOR("Kevin Tang <kevin.tang@...soc.com>");
> +MODULE_DESCRIPTION("Unisoc Display Controller Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/gpu/drm/sprd/sprd_dpu.h b/drivers/gpu/drm/sprd/sprd_dpu.h
> new file mode 100644
> index 0000000..3e7f91f
> --- /dev/null
> +++ b/drivers/gpu/drm/sprd/sprd_dpu.h
> @@ -0,0 +1,127 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2020 Unisoc Inc.
> + */
> +
> +#ifndef __SPRD_DPU_H__
> +#define __SPRD_DPU_H__
> +
> +#include <linux/bug.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/string.h>
> +#include <video/videomode.h>
> +
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_fourcc.h>
> +#include <drm/drm_print.h>
> +#include <drm/drm_vblank.h>
> +#include <uapi/drm/drm_mode.h>
> +#include "disp_lib.h"
> +
> +#define DISPC_INT_DONE_MASK            BIT(0)
> +#define DISPC_INT_TE_MASK              BIT(1)
> +#define DISPC_INT_ERR_MASK             BIT(2)
> +#define DISPC_INT_EDPI_TE_MASK         BIT(3)
> +#define DISPC_INT_UPDATE_DONE_MASK     BIT(4)
> +#define DISPC_INT_DPI_VSYNC_MASK       BIT(5)
> +#define DISPC_INT_WB_DONE_MASK         BIT(6)
> +#define DISPC_INT_WB_FAIL_MASK         BIT(7)
> +
> +/* NOTE: this mask is not a realy dpu interrupt mask */
> +#define DISPC_INT_FENCE_SIGNAL_REQUEST BIT(31)
> +
> +enum {
> +       SPRD_DISPC_IF_DBI = 0,
> +       SPRD_DISPC_IF_DPI,
> +       SPRD_DISPC_IF_EDPI,
> +       SPRD_DISPC_IF_LIMIT
> +};
> +
> +enum {
> +       SPRD_IMG_DATA_ENDIAN_B0B1B2B3 = 0,
> +       SPRD_IMG_DATA_ENDIAN_B3B2B1B0,
> +       SPRD_IMG_DATA_ENDIAN_B2B3B0B1,
> +       SPRD_IMG_DATA_ENDIAN_B1B0B3B2,
> +       SPRD_IMG_DATA_ENDIAN_LIMIT
> +};
> +
> +struct sprd_dpu_layer {
> +       u8 index;
> +       u8 planes;
> +       u32 addr[4];
> +       u32 pitch[4];
> +       s16 src_x;
> +       s16 src_y;
> +       s16 src_w;
> +       s16 src_h;
> +       s16 dst_x;
> +       s16 dst_y;
> +       u16 dst_w;
> +       u16 dst_h;
> +       u32 format;
> +       u32 alpha;
> +       u32 blending;
> +       u32 rotation;
> +};
> +
> +struct dpu_capability {
> +       u32 max_layers;
> +       const u32 *fmts_ptr;
> +       u32 fmts_cnt;
> +};
> +
> +struct dpu_context;
> +
> +struct dpu_core_ops {
> +       int (*init)(struct dpu_context *ctx);
> +       void (*fini)(struct dpu_context *ctx);
> +       void (*run)(struct dpu_context *ctx);
> +       void (*stop)(struct dpu_context *ctx);
> +       void (*disable_vsync)(struct dpu_context *ctx);
> +       void (*enable_vsync)(struct dpu_context *ctx);
> +       u32 (*isr)(struct dpu_context *ctx);
> +       void (*ifconfig)(struct dpu_context *ctx);
> +       void (*flip)(struct dpu_context *ctx,
> +                    struct sprd_dpu_layer layers[], u8 count);
> +       int (*capability)(struct dpu_context *ctx,
> +                       struct dpu_capability *cap);
> +       void (*bg_color)(struct dpu_context *ctx, u32 color);
> +};
> +
> +struct sprd_dpu_ops {
> +       const struct dpu_core_ops *core;
> +};
> +
> +struct dpu_context {
> +       unsigned long base;
> +       const char *version;
> +       int irq;
> +       u8 if_type;
> +       struct videomode vm;
> +       bool stopped;
> +       wait_queue_head_t wait_queue;
> +       bool evt_update;
> +       bool evt_stop;
> +};
> +
> +struct sprd_dpu {
> +       struct device dev;
> +       struct drm_crtc crtc;
> +       struct dpu_context ctx;
> +       const struct dpu_core_ops *core;
> +       struct drm_display_mode *mode;
> +       struct sprd_dpu_layer *layers;
> +       u8 pending_planes;
> +};
> +
> +static inline struct sprd_dpu *crtc_to_dpu(struct drm_crtc *crtc)
> +{
> +       return crtc ? container_of(crtc, struct sprd_dpu, crtc) : NULL;
> +}
> +
> +extern const struct dpu_core_ops sharkl3_dpu_core_ops;
> +
> +#endif
> diff --git a/drivers/gpu/drm/sprd/sprd_drm.c b/drivers/gpu/drm/sprd/sprd_drm.c
> index 4706185..200020f 100644
> --- a/drivers/gpu/drm/sprd/sprd_drm.c
> +++ b/drivers/gpu/drm/sprd/sprd_drm.c
> @@ -200,6 +200,7 @@ static struct platform_driver sprd_drm_driver = {
>
>  static struct platform_driver *sprd_drm_drivers[]  = {
>         &sprd_drm_driver,
> +       &sprd_dpu_driver,
>  };
>
>  static int __init sprd_drm_init(void)
> diff --git a/drivers/gpu/drm/sprd/sprd_drm.h b/drivers/gpu/drm/sprd/sprd_drm.h
> index edf0881..3c32f3a 100644
> --- a/drivers/gpu/drm/sprd/sprd_drm.h
> +++ b/drivers/gpu/drm/sprd/sprd_drm.h
> @@ -13,4 +13,6 @@ struct sprd_drm {
>         struct drm_device *drm;
>  };
>
> +extern struct platform_driver sprd_dpu_driver;
> +
>  #endif /* _SPRD_DRM_H_ */
> --
> 2.7.4
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ