[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200227122325.GA7587@ravnborg.org>
Date: Thu, 27 Feb 2020 13:23:25 +0100
From: Sam Ravnborg <sam@...nborg.org>
To: "H. Nikolaus Schaller" <hns@...delico.com>
Cc: Paul Cercueil <paul@...pouillou.net>,
Paul Boddie <paul@...die.org.uk>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ralf Baechle <ralf@...ux-mips.org>,
Paul Burton <paulburton@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Andi Kleen <ak@...ux.intel.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
"Eric W. Biederman" <ebiederm@...ssion.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linux-mips@...r.kernel.org,
linux-gpio@...r.kernel.org, kernel@...a-handheld.com,
letux-kernel@...nphoenux.org
Subject: Re: [RFC 0/8] MIPS: CI20: add HDMI out support
Hi Nikolaus.
On Wed, Feb 26, 2020 at 08:12:52PM +0100, H. Nikolaus Schaller wrote:
> This patch series adds HDMI output to the jz4780/CI20 board.
>
> It is based on taking the old 3.18 vendor kernel and trying
> to achieve the same with modern DTS setup and new/modified
> drivers.
>
> Unfortunately, in this first RFC, only EDID and creation of
> /dev/fb0 are working. Also, HDMI hot plugging is detected.
>
> But there is no HDMI output signal. So some tiny piece seems
> to be missing to enable/configure the Synposys HDMI controller.
>
> We need help from the community to fix this.
>
> Note: device tree bindings are from 2015 and still seem to
> fit - except they are not in yaml format.
>
> Original authors of most patches are
> * Paul Boddie <paul@...die.org.uk>
> * Zubair Lutfullah Kakakhel <Zubair.Kakakhel@...tec.com>
>
>
> H. Nikolaus Schaller (2):
> drm: ingenic-drm: add MODULE_DEVICE_TABLE
> MIPS: CI20: defconfig: configure for DRM_DW_HDMI_JZ4780
>
> Paul Boddie (4):
> drm: ingenic: add jz4780 Synopsys HDMI driver.
> pinctrl: ingenic: add hdmi-ddc pin control group
> MIPS: DTS: jz4780: account for Synopsys HDMI driver and LCD controller
> MIPS: DTS: CI20: add HDMI setup
>
> Zubair Lutfullah Kakakhel (2):
> dt-bindings: video: Add jz4780-lcd binding
> dt-bindings: video: Add jz4780-hdmi binding
>
> .../bindings/display/ingenic-jz4780-hdmi.txt | 41 ++++++
> .../bindings/display/ingenic-jz4780-lcd.txt | 39 ++++++
New bindings in DT Schema format please...
We want to have then in a formal launguage so we can use these
to verify the DT files.
Sam
Powered by blists - more mailing lists