linux-kernel - [RFC v2 0/8] MIPS: CI20: add HDMI out support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 28 Feb 2020 19:19:25 +0100
From:   "H. Nikolaus Schaller" <hns@...delico.com>
To:     Paul Cercueil <paul@...pouillou.net>,
        Paul Boddie <paul@...die.org.uk>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Ralf Baechle <ralf@...ux-mips.org>,
        Paul Burton <paulburton@...nel.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Andi Kleen <ak@...ux.intel.com>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        "Eric W. Biederman" <ebiederm@...ssion.com>,
        "H. Nikolaus Schaller" <hns@...delico.com>,
        Miquel Raynal <miquel.raynal@...tlin.com>
Cc:     dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-mips@...r.kernel.org,
        linux-gpio@...r.kernel.org, letux-kernel@...nphoenux.org,
        kernel@...a-handheld.com
Subject: [RFC v2 0/8] MIPS: CI20: add HDMI out support 

* Converted .txt bindings to .yaml (by Sam Ravnborg <sam@...nborg.org> - big THANKS)

RFC V1 2020-02-26 20:13:06:
This patch series adds HDMI output to the jz4780/CI20 board.

It is based on taking the old 3.18 vendor kernel and trying
to achieve the same with modern DTS setup and new/modified
drivers.

Unfortunately, in this first RFC, only EDID and creation of
/dev/fb0 are working. Also, HDMI hot plugging is detected.

But there is no HDMI output signal. So some tiny piece seems
to be missing to enable/configure the Synposys HDMI controller.

We need help from the community to fix this.

Original authors of most patches are
* Paul Boddie <paul@...die.org.uk>
* Zubair Lutfullah Kakakhel <Zubair.Kakakhel@...tec.com>


H. Nikolaus Schaller (2):
  drm: ingenic-drm: add MODULE_DEVICE_TABLE
  MIPS: CI20: defconfig: configure for DRM_DW_HDMI_JZ4780

Paul Boddie (4):
  drm: ingenic: add jz4780 Synopsys HDMI driver.
  pinctrl: ingenic: add hdmi-ddc pin control group
  MIPS: DTS: jz4780: account for Synopsys HDMI driver and LCD controller
  MIPS: DTS: CI20: add HDMI setup

Sam Ravnborg (2):
  dt-bindings: display: add ingenic-jz4780-lcd DT Schema
  dt-bindings: display: add ingenic-jz4780-hdmi DT Schema

 .../bindings/display/ingenic-jz4780-hdmi.yaml |  83 ++++++++++++
 .../bindings/display/ingenic-jz4780-lcd.yaml  |  78 ++++++++++++
 arch/mips/boot/dts/ingenic/ci20.dts           |  64 ++++++++++
 arch/mips/boot/dts/ingenic/jz4780.dtsi        |  32 +++++
 arch/mips/configs/ci20_defconfig              |   3 +
 drivers/gpu/drm/ingenic/Kconfig               |   8 ++
 drivers/gpu/drm/ingenic/Makefile              |   1 +
 drivers/gpu/drm/ingenic/dw_hdmi-jz4780.c      | 120 ++++++++++++++++++
 drivers/gpu/drm/ingenic/ingenic-drm.c         |   2 +
 drivers/pinctrl/pinctrl-ingenic.c             |   7 +
 10 files changed, 398 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
 create mode 100644 Documentation/devicetree/bindings/display/ingenic-jz4780-lcd.yaml
 create mode 100644 drivers/gpu/drm/ingenic/dw_hdmi-jz4780.c

-- 
2.23.0