| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200228224204.17746-12-elder@linaro.org>
Date: Fri, 28 Feb 2020 16:41:58 -0600
From: Alex Elder <elder@...aro.org>
To: Arnd Bergmann <arnd@...db.de>, David Miller <davem@...emloft.net>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>,
Andy Gross <agross@...nel.org>,
Johannes Berg <johannes@...solutions.net>,
Dan Williams <dcbw@...hat.com>,
Evan Green <evgreen@...gle.com>,
Eric Caruso <ejcaruso@...gle.com>,
Susheel Yadav Yadagiri <syadagir@...eaurora.org>,
Chaitanya Pratapa <cpratapa@...eaurora.org>,
Subash Abhinov Kasiviswanathan <subashab@...eaurora.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ohad Ben-Cohen <ohad@...ery.com>,
Siddharth Gupta <sidgup@...eaurora.org>,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 11/17] soc: qcom: ipa: filter and routing tables
This patch contains code implementing filter and routing tables for
the IPA. A filter table allows rules to be used for filtering
packets that depart the AP at an endpoint. A filter table entry
contains the address of a set of rules to apply for each endpoint
that supports filtering.
A routing table allows packets to be routed to an endpoint based
on packet metadata. It is also a table whose entries each contain
the address of a set of routing rules to apply.
Neither filtering nor routing is supported by the current driver.
All table entries refer to rules that mean "no filtering" and "no
routing."
Signed-off-by: Alex Elder <elder@...aro.org>
---
drivers/net/ipa/ipa_table.c | 700 ++++++++++++++++++++++++++++++++++++
drivers/net/ipa/ipa_table.h | 103 ++++++
2 files changed, 803 insertions(+)
create mode 100644 drivers/net/ipa/ipa_table.c
create mode 100644 drivers/net/ipa/ipa_table.h
diff --git a/drivers/net/ipa/ipa_table.c b/drivers/net/ipa/ipa_table.c
new file mode 100644
index 000000000000..9df2a3e78c98
--- /dev/null
+++ b/drivers/net/ipa/ipa_table.c
@@ -0,0 +1,700 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2018-2020 Linaro Ltd.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/bits.h>
+#include <linux/bitops.h>
+#include <linux/bitfield.h>
+#include <linux/io.h>
+#include <linux/build_bug.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include "ipa.h"
+#include "ipa_version.h"
+#include "ipa_endpoint.h"
+#include "ipa_table.h"
+#include "ipa_reg.h"
+#include "ipa_mem.h"
+#include "ipa_cmd.h"
+#include "gsi.h"
+#include "gsi_trans.h"
+
+/**
+ * DOC: IPA Filter and Route Tables
+ *
+ * The IPA has tables defined in its local shared memory that define filter
+ * and routing rules. Each entry in these tables contains a 64-bit DMA
+ * address that refers to DRAM (system memory) containing a rule definition.
+ * A rule consists of a contiguous block of 32-bit values terminated with
+ * 32 zero bits. A special "zero entry" rule consisting of 64 zero bits
+ * represents "no filtering" or "no routing," and is the reset value for
+ * filter or route table rules. Separate tables (both filter and route)
+ * used for IPv4 and IPv6. Additionally, there can be hashed filter or
+ * route tables, which are used when a hash of message metadata matches.
+ * Hashed operation is not supported by all IPA hardware.
+ *
+ * Each filter rule is associated with an AP or modem TX endpoint, though
+ * not all TX endpoints support filtering. The first 64-bit entry in a
+ * filter table is a bitmap indicating which endpoints have entries in
+ * the table. The low-order bit (bit 0) in this bitmap represents a
+ * special global filter, which applies to all traffic. This is not
+ * used in the current code. Bit 1, if set, indicates that there is an
+ * entry (i.e. a DMA address referring to a rule) for endpoint 0 in the
+ * table. Bit 2, if set, indicates there is an entry for endpoint 1,
+ * and so on. Space is set aside in IPA local memory to hold as many
+ * filter table entries as might be required, but typically they are not
+ * all used.
+ *
+ * The AP initializes all entries in a filter table to refer to a "zero"
+ * entry. Once initialized the modem and AP update the entries for
+ * endpoints they "own" directly. Currently the AP does not use the
+ * IPA filtering functionality.
+ *
+ * IPA Filter Table
+ * ----------------------
+ * endpoint bitmap | 0x0000000000000048 | Bits 3 and 6 set (endpoints 2 and 5)
+ * |--------------------|
+ * 1st endpoint | 0x000123456789abc0 | DMA address for modem endpoint 2 rule
+ * |--------------------|
+ * 2nd endpoint | 0x000123456789abf0 | DMA address for AP endpoint 5 rule
+ * |--------------------|
+ * (unused) | | (Unused space in filter table)
+ * |--------------------|
+ * . . .
+ * |--------------------|
+ * (unused) | | (Unused space in filter table)
+ * ----------------------
+ *
+ * The set of available route rules is divided about equally between the AP
+ * and modem. The AP initializes all entries in a route table to refer to
+ * a "zero entry". Once initialized, the modem and AP are responsible for
+ * updating their own entries. All entries in a route table are usable,
+ * though the AP currently does not use the IPA routing functionality.
+ *
+ * IPA Route Table
+ * ----------------------
+ * 1st modem route | 0x0001234500001100 | DMA address for first route rule
+ * |--------------------|
+ * 2nd modem route | 0x0001234500001140 | DMA address for second route rule
+ * |--------------------|
+ * . . .
+ * |--------------------|
+ * Last modem route| 0x0001234500002280 | DMA address for Nth route rule
+ * |--------------------|
+ * 1st AP route | 0x0001234500001100 | DMA address for route rule (N+1)
+ * |--------------------|
+ * 2nd AP route | 0x0001234500001140 | DMA address for next route rule
+ * |--------------------|
+ * . . .
+ * |--------------------|
+ * Last AP route | 0x0001234500002280 | DMA address for last route rule
+ * ----------------------
+ */
+
+/* IPA hardware constrains filter and route tables alignment */
+#define IPA_TABLE_ALIGN 128 /* Minimum table alignment */
+
+/* Assignment of route table entries to the modem and AP */
+#define IPA_ROUTE_MODEM_MIN 0
+#define IPA_ROUTE_MODEM_COUNT 8
+
+#define IPA_ROUTE_AP_MIN IPA_ROUTE_MODEM_COUNT
+#define IPA_ROUTE_AP_COUNT \
+ (IPA_ROUTE_COUNT_MAX - IPA_ROUTE_MODEM_COUNT)
+
+/* Filter or route rules consist of a set of 32-bit values followed by a
+ * 32-bit all-zero rule list terminator. The "zero rule" is simply an
+ * all-zero rule followed by the list terminator.
+ */
+#define IPA_ZERO_RULE_SIZE (2 * sizeof(__le32))
+
+#ifdef IPA_VALIDATE
+
+/* Check things that can be validated at build time. */
+static void ipa_table_validate_build(void)
+{
+ /* IPA hardware accesses memory 128 bytes at a time. Addresses
+ * referred to by entries in filter and route tables must be
+ * aligned on 128-byte byte boundaries. The only rule address
+ * ever use is the "zero rule", and it's aligned at the base
+ * of a coherent DMA allocation.
+ */
+ BUILD_BUG_ON(ARCH_DMA_MINALIGN % IPA_TABLE_ALIGN);
+
+ /* Filter and route tables contain DMA addresses that refer to
+ * filter or route rules. We use a fixed constant to represent
+ * the size of either type of table entry. Code in ipa_table_init()
+ * uses a pointer to __le64 to initialize table entriews.
+ */
+ BUILD_BUG_ON(IPA_TABLE_ENTRY_SIZE != sizeof(dma_addr_t));
+ BUILD_BUG_ON(sizeof(dma_addr_t) != sizeof(__le64));
+
+ /* A "zero rule" is used to represent no filtering or no routing.
+ * It is a 64-bit block of zeroed memory. Code in ipa_table_init()
+ * assumes that it can be written using a pointer to __le64.
+ */
+ BUILD_BUG_ON(IPA_ZERO_RULE_SIZE != sizeof(__le64));
+
+ /* Impose a practical limit on the number of routes */
+ BUILD_BUG_ON(IPA_ROUTE_COUNT_MAX > 32);
+ /* The modem must be allotted at least one route table entry */
+ BUILD_BUG_ON(!IPA_ROUTE_MODEM_COUNT);
+ /* But it can't have more than what is available */
+ BUILD_BUG_ON(IPA_ROUTE_MODEM_COUNT > IPA_ROUTE_COUNT_MAX);
+
+}
+
+static bool
+ipa_table_valid_one(struct ipa *ipa, bool route, bool ipv6, bool hashed)
+{
+ struct device *dev = &ipa->pdev->dev;
+ const struct ipa_mem *mem;
+ u32 size;
+
+ if (route) {
+ if (ipv6)
+ mem = hashed ? &ipa->mem[IPA_MEM_V6_ROUTE_HASHED]
+ : &ipa->mem[IPA_MEM_V6_ROUTE];
+ else
+ mem = hashed ? &ipa->mem[IPA_MEM_V4_ROUTE_HASHED]
+ : &ipa->mem[IPA_MEM_V4_ROUTE];
+ size = IPA_ROUTE_COUNT_MAX * IPA_TABLE_ENTRY_SIZE;
+ } else {
+ if (ipv6)
+ mem = hashed ? &ipa->mem[IPA_MEM_V6_FILTER_HASHED]
+ : &ipa->mem[IPA_MEM_V6_FILTER];
+ else
+ mem = hashed ? &ipa->mem[IPA_MEM_V4_FILTER_HASHED]
+ : &ipa->mem[IPA_MEM_V4_FILTER];
+ size = (1 + IPA_FILTER_COUNT_MAX) * IPA_TABLE_ENTRY_SIZE;
+ }
+
+ if (!ipa_cmd_table_valid(ipa, mem, route, ipv6, hashed))
+ return false;
+
+ /* mem->size >= size is sufficient, but we'll demand more */
+ if (mem->size == size)
+ return true;
+
+ /* Hashed table regions can be zero size if hashing is not supported */
+ if (hashed && !mem->size)
+ return true;
+
+ dev_err(dev, "IPv%c %s%s table region size 0x%02x, expected 0x%02x\n",
+ ipv6 ? '6' : '4', hashed ? "hashed " : "",
+ route ? "route" : "filter", mem->size, size);
+
+ return false;
+}
+
+/* Verify the filter and route table memory regions are the expected size */
+bool ipa_table_valid(struct ipa *ipa)
+{
+ bool valid = true;
+
+ valid = valid && ipa_table_valid_one(ipa, false, false, false);
+ valid = valid && ipa_table_valid_one(ipa, false, false, true);
+ valid = valid && ipa_table_valid_one(ipa, false, true, false);
+ valid = valid && ipa_table_valid_one(ipa, false, true, true);
+ valid = valid && ipa_table_valid_one(ipa, true, false, false);
+ valid = valid && ipa_table_valid_one(ipa, true, false, true);
+ valid = valid && ipa_table_valid_one(ipa, true, true, false);
+ valid = valid && ipa_table_valid_one(ipa, true, true, true);
+
+ return valid;
+}
+
+bool ipa_filter_map_valid(struct ipa *ipa, u32 filter_map)
+{
+ struct device *dev = &ipa->pdev->dev;
+ u32 count;
+
+ if (!filter_map) {
+ dev_err(dev, "at least one filtering endpoint is required\n");
+
+ return false;
+ }
+
+ count = hweight32(filter_map);
+ if (count > IPA_FILTER_COUNT_MAX) {
+ dev_err(dev, "too many filtering endpoints (%u, max %u)\n",
+ count, IPA_FILTER_COUNT_MAX);
+
+ return false;
+ }
+
+ return true;
+}
+
+#else /* !IPA_VALIDATE */
+static void ipa_table_validate_build(void)
+
+{
+}
+
+#endif /* !IPA_VALIDATE */
+
+/* Zero entry count means no table, so just return a 0 address */
+static dma_addr_t ipa_table_addr(struct ipa *ipa, bool filter_mask, u16 count)
+{
+ u32 skip;
+
+ if (!count)
+ return 0;
+
+/* assert(count <= max_t(u32, IPA_FILTER_COUNT_MAX, IPA_ROUTE_COUNT_MAX)); */
+
+ /* Skip over the zero rule and possibly the filter mask */
+ skip = filter_mask ? 1 : 2;
+
+ return ipa->table_addr + skip * sizeof(*ipa->table_virt);
+}
+
+static void ipa_table_reset_add(struct gsi_trans *trans, bool filter,
+ u16 first, u16 count, const struct ipa_mem *mem)
+{
+ struct ipa *ipa = container_of(trans->gsi, struct ipa, gsi);
+ dma_addr_t addr;
+ u32 offset;
+ u16 size;
+
+ /* Nothing to do if the table memory regions is empty */
+ if (!mem->size)
+ return;
+
+ if (filter)
+ first++; /* skip over bitmap */
+
+ offset = mem->offset + first * IPA_TABLE_ENTRY_SIZE;
+ size = count * IPA_TABLE_ENTRY_SIZE;
+ addr = ipa_table_addr(ipa, false, count);
+
+ ipa_cmd_dma_shared_mem_add(trans, offset, size, addr, true);
+}
+
+/* Reset entries in a single filter table belonging to either the AP or
+ * modem to refer to the zero entry. The memory region supplied will be
+ * for the IPv4 and IPv6 non-hashed and hashed filter tables.
+ */
+static int
+ipa_filter_reset_table(struct ipa *ipa, const struct ipa_mem *mem, bool modem)
+{
+ u32 ep_mask = ipa->filter_map;
+ u32 count = hweight32(ep_mask);
+ struct gsi_trans *trans;
+ enum gsi_ee_id ee_id;
+
+ if (!mem->size)
+ return 0;
+
+ trans = ipa_cmd_trans_alloc(ipa, count);
+ if (!trans) {
+ dev_err(&ipa->pdev->dev,
+ "no transaction for %s filter reset\n",
+ modem ? "modem" : "AP");
+ return -EBUSY;
+ }
+
+ ee_id = modem ? GSI_EE_MODEM : GSI_EE_AP;
+ while (ep_mask) {
+ u32 endpoint_id = __ffs(ep_mask);
+ struct ipa_endpoint *endpoint;
+
+ ep_mask ^= BIT(endpoint_id);
+
+ endpoint = &ipa->endpoint[endpoint_id];
+ if (endpoint->ee_id != ee_id)
+ continue;
+
+ ipa_table_reset_add(trans, true, endpoint_id, 1, mem);
+ }
+
+ gsi_trans_commit_wait(trans);
+
+ return 0;
+}
+
+/* Theoretically, each filter table could have more filter slots to
+ * update than the maximum number of commands in a transaction. So
+ * we do each table separately.
+ */
+static int ipa_filter_reset(struct ipa *ipa, bool modem)
+{
+ int ret;
+
+ ret = ipa_filter_reset_table(ipa, &ipa->mem[IPA_MEM_V4_FILTER], modem);
+ if (ret)
+ return ret;
+
+ ret = ipa_filter_reset_table(ipa, &ipa->mem[IPA_MEM_V4_FILTER_HASHED],
+ modem);
+ if (ret)
+ return ret;
+
+ ret = ipa_filter_reset_table(ipa, &ipa->mem[IPA_MEM_V6_FILTER], modem);
+ if (ret)
+ return ret;
+ ret = ipa_filter_reset_table(ipa, &ipa->mem[IPA_MEM_V6_FILTER_HASHED],
+ modem);
+
+ return ret;
+}
+
+/* The AP routes and modem routes are each contiguous within the
+ * table. We can update each table with a single command, and we
+ * won't exceed the per-transaction command limit.
+ * */
+static int ipa_route_reset(struct ipa *ipa, bool modem)
+{
+ struct gsi_trans *trans;
+ u16 first;
+ u16 count;
+
+ trans = ipa_cmd_trans_alloc(ipa, 4);
+ if (!trans) {
+ dev_err(&ipa->pdev->dev,
+ "no transaction for %s route reset\n",
+ modem ? "modem" : "AP");
+ return -EBUSY;
+ }
+
+ if (modem) {
+ first = IPA_ROUTE_MODEM_MIN;
+ count = IPA_ROUTE_MODEM_COUNT;
+ } else {
+ first = IPA_ROUTE_AP_MIN;
+ count = IPA_ROUTE_AP_COUNT;
+ }
+
+ ipa_table_reset_add(trans, false, first, count,
+ &ipa->mem[IPA_MEM_V4_ROUTE]);
+ ipa_table_reset_add(trans, false, first, count,
+ &ipa->mem[IPA_MEM_V4_ROUTE_HASHED]);
+
+ ipa_table_reset_add(trans, false, first, count,
+ &ipa->mem[IPA_MEM_V6_ROUTE]);
+ ipa_table_reset_add(trans, false, first, count,
+ &ipa->mem[IPA_MEM_V6_ROUTE_HASHED]);
+
+ gsi_trans_commit_wait(trans);
+
+ return 0;
+}
+
+void ipa_table_reset(struct ipa *ipa, bool modem)
+{
+ struct device *dev = &ipa->pdev->dev;
+ const char *ee_name;
+ int ret;
+
+ ee_name = modem ? "modem" : "AP";
+
+ /* Report errors, but reset filter and route tables */
+ ret = ipa_filter_reset(ipa, modem);
+ if (ret)
+ dev_err(dev, "error %d resetting filter table for %s\n",
+ ret, ee_name);
+
+ ret = ipa_route_reset(ipa, modem);
+ if (ret)
+ dev_err(dev, "error %d resetting route table for %s\n",
+ ret, ee_name);
+}
+
+int ipa_table_hash_flush(struct ipa *ipa)
+{
+ u32 offset = ipa_reg_filt_rout_hash_flush_offset(ipa->version);
+ struct gsi_trans *trans;
+ u32 val;
+
+ /* IPA version 4.2 does not support hashed tables */
+ if (ipa->version == IPA_VERSION_4_2)
+ return 0;
+
+ trans = ipa_cmd_trans_alloc(ipa, 1);
+ if (!trans) {
+ dev_err(&ipa->pdev->dev, "no transaction for hash flush\n");
+ return -EBUSY;
+ }
+
+ val = IPV4_FILTER_HASH_FLUSH | IPV6_FILTER_HASH_FLUSH;
+ val |= IPV6_ROUTER_HASH_FLUSH | IPV4_ROUTER_HASH_FLUSH;
+
+ ipa_cmd_register_write_add(trans, offset, val, val, false);
+
+ gsi_trans_commit_wait(trans);
+
+ return 0;
+}
+
+static void ipa_table_init_add(struct gsi_trans *trans, bool filter,
+ enum ipa_cmd_opcode opcode,
+ const struct ipa_mem *mem,
+ const struct ipa_mem *hash_mem)
+{
+ struct ipa *ipa = container_of(trans->gsi, struct ipa, gsi);
+ dma_addr_t hash_addr;
+ dma_addr_t addr;
+ u16 hash_count;
+ u16 hash_size;
+ u16 count;
+ u16 size;
+
+ /* The number of filtering endpoints determines number of entries
+ * in the filter table. The hashed and non-hashed filter table
+ * will have the same number of entries. The size of the route
+ * table region determines the number of entries it has.
+ */
+ if (filter) {
+ count = hweight32(ipa->filter_map);
+ hash_count = hash_mem->size ? count : 0;
+ } else {
+ count = mem->size / IPA_TABLE_ENTRY_SIZE;
+ hash_count = hash_mem->size / IPA_TABLE_ENTRY_SIZE;
+ }
+ size = count * IPA_TABLE_ENTRY_SIZE;
+ hash_size = hash_count * IPA_TABLE_ENTRY_SIZE;
+
+ addr = ipa_table_addr(ipa, filter, count);
+ hash_addr = ipa_table_addr(ipa, filter, hash_count);
+
+ ipa_cmd_table_init_add(trans, opcode, size, mem->offset, addr,
+ hash_size, hash_mem->offset, hash_addr);
+}
+
+int ipa_table_setup(struct ipa *ipa)
+{
+ struct gsi_trans *trans;
+
+ trans = ipa_cmd_trans_alloc(ipa, 4);
+ if (!trans) {
+ dev_err(&ipa->pdev->dev, "no transaction for table setup\n");
+ return -EBUSY;
+ }
+
+ ipa_table_init_add(trans, false, IPA_CMD_IP_V4_ROUTING_INIT,
+ &ipa->mem[IPA_MEM_V4_ROUTE],
+ &ipa->mem[IPA_MEM_V4_ROUTE_HASHED]);
+
+ ipa_table_init_add(trans, false, IPA_CMD_IP_V6_ROUTING_INIT,
+ &ipa->mem[IPA_MEM_V6_ROUTE],
+ &ipa->mem[IPA_MEM_V6_ROUTE_HASHED]);
+
+ ipa_table_init_add(trans, true, IPA_CMD_IP_V4_FILTER_INIT,
+ &ipa->mem[IPA_MEM_V4_FILTER],
+ &ipa->mem[IPA_MEM_V4_FILTER_HASHED]);
+
+ ipa_table_init_add(trans, true, IPA_CMD_IP_V6_FILTER_INIT,
+ &ipa->mem[IPA_MEM_V6_FILTER],
+ &ipa->mem[IPA_MEM_V6_FILTER_HASHED]);
+
+ gsi_trans_commit_wait(trans);
+
+ return 0;
+}
+
+void ipa_table_teardown(struct ipa *ipa)
+{
+ /* Nothing to do */ /* XXX Maybe reset the tables? */
+}
+
+/**
+ * ipa_filter_tuple_zero() - Zero an endpoint's hashed filter tuple
+ * @endpoint_id: Endpoint whose filter hash tuple should be zeroed
+ *
+ * Endpoint must be for the AP (not modem) and support filtering. Updates
+ * the filter hash values without changing route ones.
+ */
+static void ipa_filter_tuple_zero(struct ipa_endpoint *endpoint)
+{
+ u32 endpoint_id = endpoint->endpoint_id;
+ u32 offset;
+ u32 val;
+
+ offset = IPA_REG_ENDP_FILTER_ROUTER_HSH_CFG_N_OFFSET(endpoint_id);
+
+ val = ioread32(endpoint->ipa->reg_virt + offset);
+
+ /* Zero all filter-related fields, preserving the rest */
+ u32_replace_bits(val, 0, IPA_REG_ENDP_FILTER_HASH_MSK_ALL);
+
+ iowrite32(val, endpoint->ipa->reg_virt + offset);
+}
+
+static void ipa_filter_config(struct ipa *ipa, bool modem)
+{
+ enum gsi_ee_id ee_id = modem ? GSI_EE_MODEM : GSI_EE_AP;
+ u32 ep_mask = ipa->filter_map;
+
+ /* IPA version 4.2 has no hashed route tables */
+ if (ipa->version == IPA_VERSION_4_2)
+ return;
+
+ while (ep_mask) {
+ u32 endpoint_id = __ffs(ep_mask);
+ struct ipa_endpoint *endpoint;
+
+ ep_mask ^= BIT(endpoint_id);
+
+ endpoint = &ipa->endpoint[endpoint_id];
+ if (endpoint->ee_id == ee_id)
+ ipa_filter_tuple_zero(endpoint);
+ }
+}
+
+static void ipa_filter_deconfig(struct ipa *ipa, bool modem)
+{
+ /* Nothing to do */
+}
+
+static bool ipa_route_id_modem(u32 route_id)
+{
+ return route_id >= IPA_ROUTE_MODEM_MIN &&
+ route_id <= IPA_ROUTE_MODEM_MIN + IPA_ROUTE_MODEM_COUNT - 1;
+}
+
+/**
+ * ipa_route_tuple_zero() - Zero a hashed route table entry tuple
+ * @route_id: Route table entry whose hash tuple should be zeroed
+ *
+ * Updates the route hash values without changing filter ones.
+ */
+static void ipa_route_tuple_zero(struct ipa *ipa, u32 route_id)
+{
+ u32 offset = IPA_REG_ENDP_FILTER_ROUTER_HSH_CFG_N_OFFSET(route_id);
+ u32 val;
+
+ val = ioread32(ipa->reg_virt + offset);
+
+ /* Zero all route-related fields, preserving the rest */
+ u32_replace_bits(val, 0, IPA_REG_ENDP_ROUTER_HASH_MSK_ALL);
+
+ iowrite32(val, ipa->reg_virt + offset);
+}
+
+static void ipa_route_config(struct ipa *ipa, bool modem)
+{
+ u32 route_id;
+
+ /* IPA version 4.2 has no hashed route tables */
+ if (ipa->version == IPA_VERSION_4_2)
+ return;
+
+ for (route_id = 0; route_id < IPA_ROUTE_COUNT_MAX; route_id++)
+ if (ipa_route_id_modem(route_id) == modem)
+ ipa_route_tuple_zero(ipa, route_id);
+}
+
+static void ipa_route_deconfig(struct ipa *ipa, bool modem)
+{
+ /* Nothing to do */
+}
+
+void ipa_table_config(struct ipa *ipa)
+{
+ ipa_filter_config(ipa, false);
+ ipa_filter_config(ipa, true);
+ ipa_route_config(ipa, false);
+ ipa_route_config(ipa, true);
+}
+
+void ipa_table_deconfig(struct ipa *ipa)
+{
+ ipa_route_deconfig(ipa, true);
+ ipa_route_deconfig(ipa, false);
+ ipa_filter_deconfig(ipa, true);
+ ipa_filter_deconfig(ipa, false);
+}
+
+/*
+ * Initialize a coherent DMA allocation containing initialized filter and
+ * route table data. This is used when initializing or resetting the IPA
+ * filter or route table.
+ *
+ * The first entry in a filter table contains a bitmap indicating which
+ * endpoints contain entries in the table. In addition to that first entry,
+ * there are at most IPA_FILTER_COUNT_MAX entries that follow. Filter table
+ * entries are 64 bits wide, and (other than the bitmap) contain the DMA
+ * address of a filter rule. A "zero rule" indicates no filtering, and
+ * consists of 64 bits of zeroes. When a filter table is initialized (or
+ * reset) its entries are made to refer to the zero rule.
+ *
+ * Each entry in a route table is the DMA address of a routing rule. For
+ * routing there is also a 64-bit "zero rule" that means no routing, and
+ * when a route table is initialized or reset, its entries are made to refer
+ * to the zero rule. The zero rule is shared for route and filter tables.
+ *
+ * Note that the IPA hardware requires a filter or route rule address to be
+ * aligned on a 128 byte boundary. The coherent DMA buffer we allocate here
+ * has a minimum alignment, and we place the zero rule at the base of that
+ * allocated space. In ipa_table_init() we verify the minimum DMA allocation
+ * meets our requirement.
+ *
+ * +-------------------+
+ * --> | zero rule |
+ * / |-------------------|
+ * | | filter mask |
+ * |\ |-------------------|
+ * | ---- zero rule address | \
+ * |\ |-------------------| |
+ * | ---- zero rule address | | IPA_FILTER_COUNT_MAX
+ * | |-------------------| > or IPA_ROUTE_COUNT_MAX,
+ * | ... | whichever is greater
+ * \ |-------------------| |
+ * ---- zero rule address | /
+ * +-------------------+
+ */
+int ipa_table_init(struct ipa *ipa)
+{
+ u32 count = max_t(u32, IPA_FILTER_COUNT_MAX, IPA_ROUTE_COUNT_MAX);
+ struct device *dev = &ipa->pdev->dev;
+ dma_addr_t addr;
+ __le64 le_addr;
+ __le64 *virt;
+ size_t size;
+
+ ipa_table_validate_build();
+
+ size = IPA_ZERO_RULE_SIZE + (1 + count) * IPA_TABLE_ENTRY_SIZE;
+ virt = dma_alloc_coherent(dev, size, &addr, GFP_KERNEL);
+ if (!virt)
+ return -ENOMEM;
+
+ ipa->table_virt = virt;
+ ipa->table_addr = addr;
+
+ /* First slot is the zero rule */
+ *virt++ = 0;
+
+ /* Next is the filter table bitmap. The "soft" bitmap value
+ * must be converted to the hardware representation by shifting
+ * it left one position. (Bit 0 repesents global filtering,
+ * which is possible but not used.)
+ */
+ *virt++ = cpu_to_le64((u64)ipa->filter_map << 1);
+
+ /* All the rest contain the DMA address of the zero rule */
+ le_addr = cpu_to_le64(addr);
+ while (count--)
+ *virt++ = le_addr;
+
+ return 0;
+}
+
+void ipa_table_exit(struct ipa *ipa)
+{
+ u32 count = max_t(u32, 1 + IPA_FILTER_COUNT_MAX, IPA_ROUTE_COUNT_MAX);
+ struct device *dev = &ipa->pdev->dev;
+ size_t size;
+
+ size = IPA_ZERO_RULE_SIZE + (1 + count) * IPA_TABLE_ENTRY_SIZE;
+
+ dma_free_coherent(dev, size, ipa->table_virt, ipa->table_addr);
+ ipa->table_addr = 0;
+ ipa->table_virt = NULL;
+}
diff --git a/drivers/net/ipa/ipa_table.h b/drivers/net/ipa/ipa_table.h
new file mode 100644
index 000000000000..64ea0221441a
--- /dev/null
+++ b/drivers/net/ipa/ipa_table.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2019-2020 Linaro Ltd.
+ */
+#ifndef _IPA_TABLE_H_
+#define _IPA_TABLE_H_
+
+#include <linux/types.h>
+
+struct ipa;
+
+/* The size of a filter or route table entry */
+#define IPA_TABLE_ENTRY_SIZE sizeof(__le64) /* Holds a physical address */
+
+/* The maximum number of filter table entries (IPv4, IPv6; hashed or not) */
+#define IPA_FILTER_COUNT_MAX 14
+
+/* The maximum number of route table entries (IPv4, IPv6; hashed or not) */
+#define IPA_ROUTE_COUNT_MAX 15
+
+#ifdef IPA_VALIDATE
+
+/**
+ * ipa_table_valid() - Validate route and filter table memory regions
+ * @ipa: IPA pointer
+
+ * @Return: true if all regions are valid, false otherwise
+ */
+bool ipa_table_valid(struct ipa *ipa);
+
+/**
+ * ipa_filter_map_valid() - Validate a filter table endpoint bitmap
+ * @ipa: IPA pointer
+ *
+ * @Return: true if all regions are valid, false otherwise
+ */
+bool ipa_filter_map_valid(struct ipa *ipa, u32 filter_mask);
+
+#else /* !IPA_VALIDATE */
+
+static inline bool ipa_table_valid(struct ipa *ipa)
+{
+ return true;
+}
+
+static inline bool ipa_filter_map_valid(struct ipa *ipa, u32 filter_mask)
+{
+ return true;
+}
+
+#endif /* !IPA_VALIDATE */
+
+/**
+ * ipa_table_reset() - Reset filter and route tables entries to "none"
+ * @ipa: IPA pointer
+ * @modem: Whether to reset modem or AP entries
+ */
+void ipa_table_reset(struct ipa *ipa, bool modem);
+
+/**
+ * ipa_table_hash_flush() - Synchronize hashed filter and route updates
+ * @ipa: IPA pointer
+ */
+int ipa_table_hash_flush(struct ipa *ipa);
+
+/**
+ * ipa_table_setup() - Set up filter and route tables
+ * @ipa: IPA pointer
+ */
+int ipa_table_setup(struct ipa *ipa);
+
+/**
+ * ipa_table_teardown() - Inverse of ipa_table_setup()
+ * @ipa: IPA pointer
+ */
+void ipa_table_teardown(struct ipa *ipa);
+
+/**
+ * ipa_table_config() - Configure filter and route tables
+ * @ipa: IPA pointer
+ */
+void ipa_table_config(struct ipa *ipa);
+
+/**
+ * ipa_table_deconfig() - Inverse of ipa_table_config()
+ * @ipa: IPA pointer
+ */
+void ipa_table_deconfig(struct ipa *ipa);
+
+/**
+ * ipa_table_init() - Do early initialization of filter and route tables
+ * @ipa: IPA pointer
+ */
+int ipa_table_init(struct ipa *ipa);
+
+/**
+ * ipa_table_exit() - Inverse of ipa_table_init()
+ * @ipa: IPA pointer
+ */
+void ipa_table_exit(struct ipa *ipa);
+
+#endif /* _IPA_TABLE_H_ */
--
2.20.1
Powered by blists - more mailing lists