| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <10e65e28-197f-b094-5901-917b07f09adf@linux.intel.com>
Date: Fri, 28 Feb 2020 11:01:48 +0800
From: "Ramuthevar, Vadivel MuruganX"
<vadivel.muruganx.ramuthevar@...ux.intel.com>
To: Rob Herring <robh+dt@...nel.org>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
linux-spi <linux-spi@...r.kernel.org>,
Mark Brown <broonie@...nel.org>, Vignesh R <vigneshr@...com>,
devicetree@...r.kernel.org, simon.k.r.goldschmidt@...il.com,
Dinh Nguyen <dinguyen@...nel.org>, tien.fong.chee@...el.com,
Marek Vašut <marex@...x.de>,
Mark Rutland <mark.rutland@....com>,
MTD Maling List <linux-mtd@...ts.infradead.org>,
David Woodhouse <dwmw2@...radead.org>,
Richard Weinberger <richard@....at>,
Brian Norris <computersforpeace@...il.com>,
Boris BREZILLON <boris.brezillon@...e-electrons.com>,
Cyrille Pitchen <cyrille.pitchen@...el.com>,
david.oberhollenzer@...ma-star.at,
Miquèl Raynal <miquel.raynal@...tlin.com>,
tudor.ambarus@...il.com, cheol.yong.kim@...el.com,
qi-ming.wu@...el.com
Subject: Re: [PATCH v11 1/2] dt-bindings: spi: Add schema for Cadence QSPI
Controller driver
Hi Rob,
Thank you so much for the review comments...
On 28/2/2020 1:07 AM, Rob Herring wrote:
> On Thu, Feb 27, 2020 at 12:27 AM Ramuthevar,Vadivel MuruganX
> <vadivel.muruganx.ramuthevar@...ux.intel.com> wrote:
>> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@...ux.intel.com>
>>
>> Add dt-bindings documentation for Cadence-QSPI controller to support
>> spi based flash memories.
> You need to run 'make dt_binding_check' because this doesn't pass.
Sure, run and fix it.
>> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@...ux.intel.com>
>> ---
>> .../devicetree/bindings/mtd/cadence-quadspi.txt | 67 ----------
>> .../devicetree/bindings/spi/cdns,qspi-nor.yaml | 142 +++++++++++++++++++++
>> 2 files changed, 142 insertions(+), 67 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
>> create mode 100644 Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>
>> diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>> new file mode 100644
>> index 000000000000..3ad2850c412e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>> @@ -0,0 +1,142 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/spi/cdns,qspi-nor.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Cadence QSPI Flash Controller support
>> +
>> +maintainers:
>> + - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@...ux.intel.com>
>> +
>> +allOf:
>> + - $ref: "spi-controller.yaml#"
>> +
>> +description: |
>> + Binding Documentation for Cadence QSPI controller,This controller is
>> + present in the Intel LGM, Altera SoCFPGA and TI SoCs and this driver
>> + has been tested On Intel's LGM SoC.
>> +
>> + - compatible : should be one of the following:
>> + Generic default - "cdns,qspi-nor".
>> + For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
>> + For TI AM654 SoC - "ti,am654-ospi", "cdns,qspi-nor".
>> + For Intel LGM SoC - "intel,lgm-qspi", "cdns,qspi-nor".
> The schema below says all this, so drop this part.
>
>> +
>> +properties:
>> + compatible:
>> + oneOf:
>> + - items:
>> + - enum:
>> + - ti,k2g-qspi
>> + - const: cdns,qspi-nor
>> +
>> + - items:
>> + - enum:
>> + - ti,am654-ospi
>> + - const: cdns,qspi-nor
>> +
>> + - items:
>> + - enum:
>> + - intel,lgm-qspi
>> + - const: cdns,qspi-nor
> These 3 items can be 1 entry (combine the enums).
Noted, will fix it.
>
>> +
>> + - items:
>> + - const: cdns,qspi-nor
>> +
>> + reg:
>> + maxItems: 2
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + clocks:
>> + maxItems: 1
>> +
>> + cdns,fifo-depth:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + 128 or 256 bytes size of the data FIFO in words.
> Sounds like constraints. Make them a schema.
Sure, will make as schema.
>> +
>> + cdns,fifo-width:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + 4 byte bus width of the data FIFO in bytes.
> That's not very clear. It should be schema constraints anyways:
>
> enum: [ 4, 8, 12, 16, ...??? ]
>
> or:
>
> multipleOf: 4
> minimum: 4
> maximum: ?
Noted, will fix it.
>> +
>> + cdns,trigger-address:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + 32-bit indirect AHB trigger address.
>> +
>> + cdns,rclk-en:
>> + $ref: /schemas/types.yaml#/definitions/uint32
> Wrong type if this is a 'flag' aka boolean.
Yes , you are correct.
>> + description: |
>> + Flag to indicate that QSPI return clock is used to latch the read data
>> + rather than the QSPI clock. Make sure that QSPI return clock is populated
>> + on the board before using this property.
>> +
>> +# subnode's properties
>> +patternProperties:
>> + "^.*@[0-9a-fA-F]+$":
>> + type: object
>> + description:
>> + flash device uses the subnodes below defined properties.
>> +
>> + cdns,read-delay:
>> + description:
>> + Delay in 4 microseconds, read capture logic, in clock cycles.
> Huh? Is it in time or clocks?
>
> No unit suffix here, so this needs a type ref. That's what 'make
> dt_binding_check' fails on.
it's clock cycles to adjustable delay, read data delay between the
Flash Device data outputs and the controller data inputs
>> +
>> + cdns,tshsl-ns:
>> + description: |
>> + Delay in 50 nanoseconds, for the length that the master mode chip select
>> + outputs are de-asserted between transactions.
> multipleOf: 50
>
> And so on for the rest.
Okay , Noted.
Regards
Vadivel
>> +
>> + cdns,tsd2d-ns:
>> + description: |
>> + Delay in 50 nanoseconds, between one chip select being de-activated
>> + and the activation of another.
>> +
>> + cdns,tchsh-ns:
>> + description: |
>> + Delay in 4 nanoseconds, between last bit of current transaction and
>> + deasserting the device chip select (qspi_n_ss_out).
>> +
>> + cdns,tslch-ns:
>> + description: |
>> + Delay in 4 nanoseconds, between setting qspi_n_ss_out low and
>> + first bit transfer.
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - interrupts
>> + - clocks
>> + - cdns,fifo-depth
>> + - cdns,fifo-width
>> + - cdns,trigger-address
>> +
>> +examples:
>> + - |
>> + qspi: spi@...05000 {
>> + compatible = "cdns,qspi-nor";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0xff705000 0x1000>,
>> + <0xffa00000 0x1000>;
>> + interrupts = <0 151 4>;
>> + clocks = <&qspi_clk>;
>> + cdns,fifo-depth = <128>;
>> + cdns,fifo-width = <4>;
>> + cdns,trigger-address = <0x00000000>;
>> +
>> + flash0: n25q00@0 {
>> + compatible = "jedec,spi-nor";
>> + reg = <0x0>;
>> + cdns,read-delay = <4>;
>> + cdns,tshsl-ns = <50>;
>> + cdns,tsd2d-ns = <50>;
>> + cdns,tchsh-ns = <4>;
>> + cdns,tslch-ns = <4>;
>> + };
>> + };
>> +
>> --
>> 2.11.0
>>
Powered by blists - more mailing lists