| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1582901323.3.4@crapouillou.net>
Date: Fri, 28 Feb 2020 11:48:43 -0300
From: Paul Cercueil <paul@...pouillou.net>
To: "H. Nikolaus Schaller" <hns@...delico.com>
Cc: PrasannaKumar Muralidharan <prasannatsmkumar@...il.com>,
Andreas Kemnade <andreas@...nade.info>,
Mathieu Malaterre <malat@...ian.org>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ralf Baechle <ralf@...ux-mips.org>,
Paul Burton <paulburton@...nel.org>,
Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Kees Cook <keescook@...omium.org>,
Andi Kleen <ak@...ux.intel.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-mips@...r.kernel.org, letux-kernel@...nphoenux.org,
kernel@...a-handheld.com
Subject: Re: [PATCH v7 2/7] nvmem: add driver for JZ4780 efuse
Hi Nikolaus,
Le ven., févr. 28, 2020 at 14:58, H. Nikolaus Schaller
<hns@...delico.com> a écrit :
> From: PrasannaKumar Muralidharan <prasannatsmkumar@...il.com>
>
> This patch brings support for the JZ4780 efuse. Currently it only
> exposes
> a read only access to the entire 8K bits efuse memory and nvmem cells.
>
> To fetch for example the MAC address:
>
> dd if=/sys/devices/platform/134100d0.efuse/jz4780-efuse0/nvmem bs=1
> skip=34 count=6 status=none | xxd
>
> Tested-by: Mathieu Malaterre <malat@...ian.org>
> Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@...il.com>
> Signed-off-by: Mathieu Malaterre <malat@...ian.org>
> Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
> Signed-off-by: Paul Cercueil <paul@...pouillou.net>
> ---
> drivers/nvmem/Kconfig | 12 ++
> drivers/nvmem/Makefile | 2 +
> drivers/nvmem/jz4780-efuse.c | 234
> +++++++++++++++++++++++++++++++++++
> 3 files changed, 248 insertions(+)
> create mode 100644 drivers/nvmem/jz4780-efuse.c
>
> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
> index 35efab1ba8d9..d7b7f6d688e7 100644
> --- a/drivers/nvmem/Kconfig
> +++ b/drivers/nvmem/Kconfig
> @@ -55,6 +55,18 @@ config NVMEM_IMX_OCOTP_SCU
> This is a driver for the SCU On-Chip OTP Controller (OCOTP)
> available on i.MX8 SoCs.
>
> +config JZ4780_EFUSE
> + tristate "JZ4780 EFUSE Memory Support"
> + depends on MACH_INGENIC || COMPILE_TEST
> + depends on HAS_IOMEM
> + depends on OF
> + select REGMAP_MMIO
> + help
> + Say Y here to include support for JZ4780 efuse memory found on
> + all JZ4780 SoC based devices.
> + To compile this driver as a module, choose M here: the module
> + will be called nvmem_jz4780_efuse.
> +
> config NVMEM_LPC18XX_EEPROM
> tristate "NXP LPC18XX EEPROM Memory Support"
> depends on ARCH_LPC18XX || COMPILE_TEST
> diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
> index 6b466cd1427b..65a268d17807 100644
> --- a/drivers/nvmem/Makefile
> +++ b/drivers/nvmem/Makefile
> @@ -18,6 +18,8 @@ obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o
> nvmem-imx-ocotp-y := imx-ocotp.o
> obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o
> nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o
> +obj-$(CONFIG_JZ4780_EFUSE) += nvmem_jz4780_efuse.o
> +nvmem_jz4780_efuse-y := jz4780-efuse.o
> obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += nvmem_lpc18xx_eeprom.o
> nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o
> obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o
> diff --git a/drivers/nvmem/jz4780-efuse.c
> b/drivers/nvmem/jz4780-efuse.c
> new file mode 100644
> index 000000000000..4e9dd340e33a
> --- /dev/null
> +++ b/drivers/nvmem/jz4780-efuse.c
> @@ -0,0 +1,234 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * JZ4780 EFUSE Memory Support driver
> + *
> + * Copyright (c) 2017 PrasannaKumar Muralidharan
> <prasannatsmkumar@...il.com>
> + * Copyright (c) 2020 H. Nikolaus Schaller <hns@...delico.com>
> + */
> +
> +/*
> + * Currently supports JZ4780 efuse which has 8K programmable bit.
> + * Efuse is separated into seven segments as below:
> + *
> + *
> -----------------------------------------------------------------------
> + * | 64 bit | 128 bit | 128 bit | 3520 bit | 8 bit | 2296 bit | 2048
> bit |
> + *
> -----------------------------------------------------------------------
> + *
> + * The rom itself is accessed using a 9 bit address line and an 8
> word wide bus
> + * which reads/writes based on strobes. The strobe is configured in
> the config
> + * register and is based on number of cycles of the bus clock.
> + *
> + * Driver supports read only as the writes are done in the Factory.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/nvmem-provider.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/timer.h>
> +
> +#define JZ_EFUCTRL (0x0) /* Control Register */
> +#define JZ_EFUCFG (0x4) /* Configure Register*/
> +#define JZ_EFUSTATE (0x8) /* Status Register */
> +#define JZ_EFUDATA(n) (0xC + (n) * 4)
> +
> +/* We read 32 byte chunks to avoid complexity in the driver. */
> +#define JZ_EFU_READ_SIZE 32
> +
> +#define EFUCTRL_ADDR_MASK 0x3FF
> +#define EFUCTRL_ADDR_SHIFT 21
> +#define EFUCTRL_LEN_MASK 0x1F
> +#define EFUCTRL_LEN_SHIFT 16
> +#define EFUCTRL_PG_EN BIT(15)
> +#define EFUCTRL_WR_EN BIT(1)
> +#define EFUCTRL_RD_EN BIT(0)
> +
> +#define EFUCFG_INT_EN BIT(31)
> +#define EFUCFG_RD_ADJ_MASK 0xF
> +#define EFUCFG_RD_ADJ_SHIFT 20
> +#define EFUCFG_RD_STR_MASK 0xF
> +#define EFUCFG_RD_STR_SHIFT 16
> +#define EFUCFG_WR_ADJ_MASK 0xF
> +#define EFUCFG_WR_ADJ_SHIFT 12
> +#define EFUCFG_WR_STR_MASK 0xFFF
> +#define EFUCFG_WR_STR_SHIFT 0
> +
> +#define EFUSTATE_WR_DONE BIT(1)
> +#define EFUSTATE_RD_DONE BIT(0)
> +
> +struct jz4780_efuse {
> + struct device *dev;
> + struct regmap *map;
> + struct clk *clk;
> +};
> +
> +/* main entry point */
> +static int jz4780_efuse_read(void *context, unsigned int offset,
> + void *val, size_t bytes)
> +{
> + struct jz4780_efuse *efuse = context;
> +
> + while (bytes > 0) {
> + unsigned int start = offset & ~(JZ_EFU_READ_SIZE - 1);
> + unsigned int chunk = min(bytes, (start + JZ_EFU_READ_SIZE)
> + - offset);
> + char buf[JZ_EFU_READ_SIZE];
> + unsigned int tmp;
> + u32 ctrl;
> + int ret;
> +
> + ctrl = (start << EFUCTRL_ADDR_SHIFT)
> + | ((JZ_EFU_READ_SIZE - 1) << EFUCTRL_LEN_SHIFT)
> + | EFUCTRL_RD_EN;
> +
> + regmap_update_bits(efuse->map, JZ_EFUCTRL,
> + (EFUCTRL_ADDR_MASK << EFUCTRL_ADDR_SHIFT) |
> + (EFUCTRL_LEN_MASK << EFUCTRL_LEN_SHIFT) |
> + EFUCTRL_PG_EN | EFUCTRL_WR_EN |
> + EFUCTRL_RD_EN,
> + ctrl);
> +
> + ret = regmap_read_poll_timeout(efuse->map, JZ_EFUSTATE,
> + tmp, tmp & EFUSTATE_RD_DONE,
> + 1 * MSEC_PER_SEC,
> + 50 * MSEC_PER_SEC);
> + if (ret < 0) {
> + dev_err(efuse->dev, "Time out while reading efuse data");
> + return ret;
> + }
> +
> + ret = regmap_bulk_read(efuse->map, JZ_EFUDATA(0),
> + buf, JZ_EFU_READ_SIZE / sizeof(u32));
> + if (ret < 0)
> + return ret;
> +
> + memcpy(val, &buf[offset - start], chunk);
> +
> + val += chunk;
> + offset += chunk;
> + bytes -= chunk;
> + }
> +
> + return 0;
> +}
> +
> +static struct nvmem_config jz4780_efuse_nvmem_config = {
> + .name = "jz4780-efuse",
> + .size = 1024,
> + .word_size = 1,
> + .stride = 1,
> + .owner = THIS_MODULE,
> + .reg_read = jz4780_efuse_read,
> +};
> +
> +static const struct regmap_config jz4780_efuse_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .max_register = JZ_EFUDATA(7),
> +};
> +
> +static int jz4780_efuse_probe(struct platform_device *pdev)
> +{
> + struct nvmem_device *nvmem;
> + struct jz4780_efuse *efuse;
> + struct nvmem_config cfg;
> + unsigned long clk_rate;
> + unsigned long rd_adj;
> + unsigned long rd_strobe;
> + struct device *dev = &pdev->dev;
> + void __iomem *regs;
> + int ret;
> +
> + efuse = devm_kzalloc(dev, sizeof(*efuse), GFP_KERNEL);
> + if (!efuse)
> + return -ENOMEM;
> +
> + regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(regs))
> + return PTR_ERR(regs);
> +
> + efuse->map = devm_regmap_init_mmio(dev, regs,
> + &jz4780_efuse_regmap_config);
> + if (IS_ERR(efuse->map))
> + return PTR_ERR(efuse->map);
> +
> + efuse->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(efuse->clk))
> + return PTR_ERR(efuse->clk);
> +
> + ret = clk_prepare_enable(efuse->clk);
> + if (ret < 0)
> + return ret;
> +
> + ret = devm_add_action_or_reset(&pdev->dev,
> + &clk_disable_unprepare,
> + efuse->clk);
That's what I thought, this does not build:
CC drivers/nvmem/jz4780-efuse.o
drivers/nvmem/jz4780-efuse.c: In function 'jz4780_efuse_probe':
drivers/nvmem/jz4780-efuse.c:168:12: error: passing argument 2 of
'devm_add_action_or_reset' from incompatible pointer type
[-Werror=incompatible-pointer-types]
168 | &clk_disable_unprepare,
| ^~~~~~~~~~~~~~~~~~~~~~
| |
| void (*)(struct clk *)
In file included from ./include/linux/platform_device.h:13,
from drivers/nvmem/jz4780-efuse.c:29:
./include/linux/device.h:256:16: note: expected 'void (*)(void *)' but
argument is of type 'void (*)(struct clk *)'
256 | void (*action)(void *), void *data)
| ~~~~~~~^~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make[2]: *** [scripts/Makefile.build:268: drivers/nvmem/jz4780-efuse.o]
Error 1
make[1]: *** [scripts/Makefile.build:505: drivers/nvmem] Error 2
make: *** [Makefile:1681: drivers] Error 2
You need a local function of type 'void foo(void *data)' that just
calls clk_disable_unprepare(data) and the compiler will be happy.
(btw - no need to deference functions pointers, since they are already
pointers)
With that said, I expect you to at least compile-test the patchset
before sending it upstream...
The rest of the patch looks good, so just fix that, and it'll be good
to go.
Cheers,
-Paul
> + if (ret < 0)
> + return ret;
> +
> + clk_rate = clk_get_rate(efuse->clk);
> +
> + efuse->dev = dev;
> +
> + /*
> + * rd_adj and rd_strobe are 4 bit values
> + * conditions:
> + * bus clk_period * (rd_adj + 1) > 6.5ns
> + * bus clk_period * (rd_adj + 5 + rd_strobe) > 35ns
> + * i.e. rd_adj >= 6.5ns / clk_period
> + * i.e. rd_strobe >= 35 ns / clk_period - 5 - rd_adj + 1
> + * constants:
> + * 1 / 6.5ns == 153846154 Hz
> + * 1 / 35ns == 28571429 Hz
> + */
> +
> + rd_adj = clk_rate / 153846154;
> + rd_strobe = clk_rate / 28571429 - 5 - rd_adj + 1;
> +
> + if (rd_adj > EFUCFG_RD_ADJ_MASK ||
> + rd_strobe > EFUCFG_RD_STR_MASK) {
> + dev_err(&pdev->dev, "Cannot set clock configuration\n");
> + return -EINVAL;
> + }
> +
> + regmap_update_bits(efuse->map, JZ_EFUCFG,
> + (EFUCFG_RD_ADJ_MASK << EFUCFG_RD_ADJ_SHIFT) |
> + (EFUCFG_RD_STR_MASK << EFUCFG_RD_STR_SHIFT),
> + (rd_adj << EFUCFG_RD_ADJ_SHIFT) |
> + (rd_strobe << EFUCFG_RD_STR_SHIFT));
> +
> + cfg = jz4780_efuse_nvmem_config;
> + cfg.dev = &pdev->dev;
> + cfg.priv = efuse;
> +
> + nvmem = devm_nvmem_register(dev, &cfg);
> + if (IS_ERR(nvmem))
> + return PTR_ERR(nvmem);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id jz4780_efuse_match[] = {
> + { .compatible = "ingenic,jz4780-efuse" },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, jz4780_efuse_match);
> +
> +static struct platform_driver jz4780_efuse_driver = {
> + .probe = jz4780_efuse_probe,
> + .driver = {
> + .name = "jz4780-efuse",
> + .of_match_table = jz4780_efuse_match,
> + },
> +};
> +module_platform_driver(jz4780_efuse_driver);
> +
> +MODULE_AUTHOR("PrasannaKumar Muralidharan
> <prasannatsmkumar@...il.com>");
> +MODULE_AUTHOR("H. Nikolaus Schaller <hns@...delico.com>");
> +MODULE_AUTHOR("Paul Cercueil <paul@...pouillou.net>");
> +MODULE_DESCRIPTION("Ingenic JZ4780 efuse driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.23.0
>
Powered by blists - more mailing lists