| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <46e9873e288134f638cd8726a2c15c9ca63860ce.camel@wdc.com>
Date: Fri, 28 Feb 2020 01:05:48 +0000
From: Atish Patra <Atish.Patra@....com>
To: "ardb@...nel.org" <ardb@...nel.org>
CC: "alexios.zavras@...el.com" <alexios.zavras@...el.com>,
"tglx@...utronix.de" <tglx@...utronix.de>,
"mchehab+samsung@...nel.org" <mchehab+samsung@...nel.org>,
"pbonzini@...hat.com" <pbonzini@...hat.com>,
"linux@...linux.org.uk" <linux@...linux.org.uk>,
"michal.simek@...inx.com" <michal.simek@...inx.com>,
"abner.chang@....com" <abner.chang@....com>,
"linux-riscv@...ts.infradead.org" <linux-riscv@...ts.infradead.org>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"daniel.schaefer@....com" <daniel.schaefer@....com>,
Anup Patel <Anup.Patel@....com>,
"kstewart@...uxfoundation.org" <kstewart@...uxfoundation.org>,
"palmer@...belt.com" <palmer@...belt.com>,
"aou@...s.berkeley.edu" <aou@...s.berkeley.edu>,
"arnd@...db.de" <arnd@...db.de>,
"rppt@...ux.ibm.com" <rppt@...ux.ibm.com>,
"bp@...e.de" <bp@...e.de>,
"linux-efi@...r.kernel.org" <linux-efi@...r.kernel.org>,
"greentime.hu@...ive.com" <greentime.hu@...ive.com>,
"keescook@...omium.org" <keescook@...omium.org>,
"agraf@...raf.de" <agraf@...raf.de>,
"will@...nel.org" <will@...nel.org>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"mingo@...nel.org" <mingo@...nel.org>,
"allison@...utok.net" <allison@...utok.net>,
"han_mao@...ky.com" <han_mao@...ky.com>,
"paul.walmsley@...ive.com" <paul.walmsley@...ive.com>,
"leif@...iainc.com" <leif@...iainc.com>,
"linus.walleij@...aro.org" <linus.walleij@...aro.org>,
"akpm@...ux-foundation.org" <akpm@...ux-foundation.org>
Subject: Re: [RFC PATCH 5/5] RISC-V: Add EFI stub support.
On Thu, 2020-02-27 at 20:59 +0100, Ard Biesheuvel wrote:
> On Thu, 27 Feb 2020 at 20:53, Atish Patra <Atish.Patra@....com>
> wrote:
> > On Wed, 2020-02-26 at 08:28 +0100, Ard Biesheuvel wrote:
> > > On Wed, 26 Feb 2020 at 02:10, Atish Patra <atish.patra@....com>
> > > wrote:
> > > > Add a RISC-V architecture specific stub code that actually
> > > > copies
> > > > the
> > > > actual kernel image to a valid address and jump to it after
> > > > boot
> > > > services
> > > > are terminated. Enable UEFI related kernel configs as well for
> > > > RISC-V.
> > > >
> > > > Signed-off-by: Atish Patra <atish.patra@....com>
> > > > ---
> > > > arch/riscv/Kconfig | 20 ++++
> > > > arch/riscv/Makefile | 1 +
> > > > arch/riscv/configs/defconfig | 1 +
> > > > drivers/firmware/efi/libstub/Makefile | 8 ++
> > > > drivers/firmware/efi/libstub/riscv-stub.c | 135
> > > > ++++++++++++++++++++++
> > > > 5 files changed, 165 insertions(+)
> > > > create mode 100644 drivers/firmware/efi/libstub/riscv-stub.c
> > > >
> > > > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > > > index 42c122170cfd..68b1d565e51d 100644
> > > > --- a/arch/riscv/Kconfig
> > > > +++ b/arch/riscv/Kconfig
> > > > @@ -372,10 +372,30 @@ config CMDLINE_FORCE
> > > >
> > > > endchoice
> > > >
> > > > +config EFI_STUB
> > > > + bool
> > > > +
> > > > +config EFI
> > > > + bool "UEFI runtime support"
> > > > + depends on OF
> > > > + select LIBFDT
> > > > + select UCS2_STRING
> > > > + select EFI_PARAMS_FROM_FDT
> > > > + select EFI_STUB
> > > > + select EFI_GENERIC_ARCH_STUB
> > > > + default y
> > > > + help
> > > > + This option provides support for runtime services
> > > > provided
> > > > + by UEFI firmware (such as non-volatile variables,
> > > > realtime
> > > > + clock, and platform reset). A UEFI stub is also
> > > > provided
> > > > to
> > > > + allow the kernel to be booted as an EFI application.
> > > > This
> > > > + is only useful on systems that have UEFI firmware.
> > > > +
> > > > endmenu
> > > >
> > > > menu "Power management options"
> > > >
> > > > source "kernel/power/Kconfig"
> > > > +source "drivers/firmware/Kconfig"
> > > >
> > > > endmenu
> > > > diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> > > > index b9009a2fbaf5..0afaa89ba9ad 100644
> > > > --- a/arch/riscv/Makefile
> > > > +++ b/arch/riscv/Makefile
> > > > @@ -78,6 +78,7 @@ head-y := arch/riscv/kernel/head.o
> > > > core-y += arch/riscv/
> > > >
> > > > libs-y += arch/riscv/lib/
> > > > +core-$(CONFIG_EFI_STUB) +=
> > > > $(objtree)/drivers/firmware/efi/libstub/lib.a
> > > >
> > > > PHONY += vdso_install
> > > > vdso_install:
> > > > diff --git a/arch/riscv/configs/defconfig
> > > > b/arch/riscv/configs/defconfig
> > > > index e2ff95cb3390..0a5d3578f51e 100644
> > > > --- a/arch/riscv/configs/defconfig
> > > > +++ b/arch/riscv/configs/defconfig
> > > > @@ -125,3 +125,4 @@ CONFIG_DEBUG_BLOCK_EXT_DEVT=y
> > > > # CONFIG_FTRACE is not set
> > > > # CONFIG_RUNTIME_TESTING_MENU is not set
> > > > CONFIG_MEMTEST=y
> > > > +CONFIG_EFI=y
> > > > diff --git a/drivers/firmware/efi/libstub/Makefile
> > > > b/drivers/firmware/efi/libstub/Makefile
> > > > index 2c5b76787126..38facb61745b 100644
> > > > --- a/drivers/firmware/efi/libstub/Makefile
> > > > +++ b/drivers/firmware/efi/libstub/Makefile
> > > > @@ -21,6 +21,8 @@ cflags-$(CONFIG_ARM64) :=
> > > > $(subst
> > > > $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> > > > cflags-$(CONFIG_ARM) := $(subst
> > > > $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> > > > -fno-builtin -fpic \
> > > > $(call cc-option,-mno-
> > > > single-
> > > > pic-base)
> > > > +cflags-$(CONFIG_RISCV) := $(subst
> > > > $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> > > > + -fpic
> > > >
> > > > cflags-$(CONFIG_EFI_GENERIC_ARCH_STUB) +=
> > > > -I$(srctree)/scripts/dtc/libfdt
> > > >
> > > > @@ -55,6 +57,7 @@ lib-
> > > > $(CONFIG_EFI_GENERIC_ARCH_STUB) +=
> > > > efi-stub.o fdt.o string.o \
> > > > lib-$(CONFIG_ARM) += arm32-stub.o
> > > > lib-$(CONFIG_ARM64) += arm64-stub.o
> > > > lib-$(CONFIG_X86) += x86-stub.o
> > > > +lib-$(CONFIG_RISCV) += riscv-stub.o
> > > > CFLAGS_arm32-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
> > > > CFLAGS_arm64-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
> > > >
> > > > @@ -79,6 +82,11 @@ STUBCOPY_FLAGS-$(CONFIG_ARM64) += --
> > > > prefix-alloc-sections=.init \
> > > > --prefix-symbols=__efistub_
> > > > STUBCOPY_RELOC-$(CONFIG_ARM64) := R_AARCH64_ABS
> > > >
> > > > +STUBCOPY_FLAGS-$(CONFIG_RISCV) += --prefix-alloc-
> > > > sections=.init \
> > > > + --prefix-symbols=__efistub_
> > > > +STUBCOPY_RELOC-$(CONFIG_RISCV) := R_RISCV_HI20
> > > > +
> > > > +
> > > > $(obj)/%.stub.o: $(obj)/%.o FORCE
> > > > $(call if_changed,stubcopy)
> > > >
> > > > diff --git a/drivers/firmware/efi/libstub/riscv-stub.c
> > > > b/drivers/firmware/efi/libstub/riscv-stub.c
> > > > new file mode 100644
> > > > index 000000000000..3935b29ea93a
> > > > --- /dev/null
> > > > +++ b/drivers/firmware/efi/libstub/riscv-stub.c
> > > > @@ -0,0 +1,135 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +/*
> > > > + * Copyright (C) 2013, 2014 Linaro Ltd; <roy.franz@...aro.org
> > > > >
> > > > + * Copyright (C) 2020 Western Digital Corporation or its
> > > > affiliates.
> > > > + *
> > > > + * This file implements the EFI boot stub for the RISC-V
> > > > kernel.
> > > > + * Adapted from ARM64 version at
> > > > drivers/firmware/efi/libstub/arm64-stub.c.
> > > > + */
> > > > +
> > > > +#include <linux/efi.h>
> > > > +#include <linux/libfdt.h>
> > > > +#include <linux/libfdt_env.h>
> > > > +#include <asm/efi.h>
> > > > +#include <asm/sections.h>
> > > > +
> > > > +#include "efistub.h"
> > > > +/*
> > > > + * RISCV requires the kernel image to placed TEXT_OFFSET bytes
> > > > beyond a 2 MB
> > > > + * aligned base for 64 bit and 4MB for 32 bit.
> > > > + */
> > > > +#if IS_ENABLED(CONFIG_64BIT)
> > >
> > > You can use #ifdef here
> > >
> >
> > ok.
> >
> > > > +#define MIN_KIMG_ALIGN SZ_2M
> > > > +#else
> > > > +#define MIN_KIMG_ALIGN SZ_4M
> > > > +#endif
> > > > +/*
> > > > + * TEXT_OFFSET ensures that we don't overwrite the firmware
> > > > that
> > > > probably sits
> > > > + * at the beginning of the DRAM.
> > > > + */
> > >
> > > Ugh. Really? On an EFI system, that memory should be reserved in
> > > some
> > > way, we shouldn't be able to stomp on it like that.
> > >
> >
> > Currently, we reserve the initial 128KB for run time firmware(only
> > openSBI for now, EDK2 later) by using PMP (physical memory
> > protection).
> > Any acess to that region from supervisor mode (i.e. U-Boot) will
> > result
> > in a fault.
> >
> > Is it mandatory for UEFI to reserve the beginning of the DRAM ?
> >
>
> It is mandatory to describe which memory is usable and which memory
> is
> reserved. If this memory is not usable, you either describe it as
> reserved, or not describe it at all. Describing it as usable memory,
> allocating it for the kernel but with a hidden agreement that it is
> reserved is highly likely to cause problems down the road.
>
I completely agree with you on this. We have been talking to have a
booting guide and memory map document for RISC-V Linux to document all
the idiosyncries of RISC-V. But that has not happend until now.
Once, the ordered booting patches are merged, I will try to take a stab
at it.
Other than that, do we need to describe it somewhere in U-boot wrt to
UEFI so that it doesn't allocate memory from that region ?
>
>
> > > > +#define TEXT_OFFSET MIN_KIMG_ALIGN
> > > > +
> > > > +typedef __attribute__((noreturn)) void
> > > > (*jump_kernel_func)(unsigned int,
> > > > + unsi
> > > > gned
> > > > long);
> > > > +
> > > > +efi_status_t check_platform_features(void)
> > > > +{
> > > > + return EFI_SUCCESS;
> > > > +}
> > > > +
> > > > +u64 get_boot_hartid_from_fdt(unsigned long fdt)
> > >
> > > static
> > >
> > > > +{
> > > > + int chosen_node, len;
> > > > + const fdt64_t *prop;
> > > > + uint64_t hartid = U64_MAX;
> > > > +
> > > > + chosen_node = fdt_path_offset((void *)fdt, "/chosen");
> > > > + if (chosen_node < 0)
> > > > + return hartid;
> > >
> > > Just return U64_MAX here
> > >
> > > > + prop = fdt_getprop((void *)fdt, chosen_node, "efi-boot-
> > > > hartid", &len);
> > >
> > > Please call this 'boot-hartid' not 'efi-boot-hartid' as the
> > > hartid
> > > value is independent of whether you boot via EFI or not.
> > >
> > > > + if (!prop || len != sizeof(u64))
> > > > + return hartid;
> > > > +
> > >
> > > Return U64_MAX
> > >
> > > > + hartid = fdt64_to_cpu(*prop);
> > > > +
> > >
> > > and just return the swabbed value, so you can get rid of the
> > > local
> > > var.
> > >
> >
> > Fixed all the above issues. I changed it to u32 as u64 won't work
> > on 32
> > bit systems.
> >
>
> If the hart id is only 32 bits max then i guess that will work.
>
> > > > + return hartid;
> > > > +}
> > > > +
> > > > +/*
> > > > + * Jump to real kernel here with following constraints.
> > > > + * 1. MMU should be disabled.
> > > > + * 2. a0 should contain hartid
> > > > + * 3. a1 should DT address
> > > > + */
> > > > +void __noreturn efi_enter_kernel(unsigned long entrypoint,
> > > > unsigned long fdt)
> > >
> > > This prototype has changed, and now includes the size of the fdt
> > > in
> > > param 3.
> > >
> >
> > Ahh yes. Fixed.
> >
> > > > +{
> > > > + unsigned long kernel_entry = entrypoint + _start_kernel
> > > > -
> > > > _start;
> > >
> > > stext_offset ? It has a terrible name though, and I'll probably
> > > propose to change it at some point, for all arches. But you can
> > > still
> > > use it here.
> > >
> >
> > Sure. I updated it with stext_offset.
> >
> > > > + jump_kernel_func jump_kernel = (void (*)(unsigned int,
> > > > unsigned long))kernel_entry;
> > > > + u64 hartid = get_boot_hartid_from_fdt(fdt);
> > > > +
> > > > + if (hartid == U64_MAX)
> > > > + /* We can not use panic or BUG at this point */
> > > > + __asm__ __volatile__ ("ebreak");
> > > > + /* Disable MMU */
> > > > + csr_write(CSR_SATP, 0);
> > > > + jump_kernel(hartid, fdt);
> > > > +}
> > > > +
> > > > +efi_status_t handle_kernel_image(unsigned long *image_addr,
> > > > + unsigned long *image_size,
> > > > + unsigned long *reserve_addr,
> > > > + unsigned long *reserve_size,
> > > > + unsigned long dram_base,
> > > > + efi_loaded_image_t *image)
> > > > +{
> > > > + efi_status_t status;
> > > > + unsigned long kernel_size, kernel_memsize = 0;
> > > > + unsigned long preferred_offset;
> > > > +
> > > > + /*
> > > > + * The preferred offset of the kernel Image is
> > > > TEXT_OFFSET
> > > > bytes beyond
> > > > + * a KIMG_ALIGN aligned base.
> > > > + */
> > > > + preferred_offset = round_up(dram_base, MIN_KIMG_ALIGN)
> > > > +
> > > > TEXT_OFFSET;
> > > > +
> > > > + kernel_size = _edata - _start;
> > > > + kernel_memsize = kernel_size + (_end - _edata);
> > > > +
> > > > + /*
> > > > + * Try a straight allocation at the preferred offset.
> > > > + * This will work around the issue where, if dram_base
> > > > ==
> > > > 0x0,
> > > > + * efi_low_alloc() refuses to allocate at 0x0 (to
> > > > prevent
> > > > the
> > > > + * address of the allocation to be mistaken for a FAIL
> > > > return
> > > > + * value or a NULL pointer). It will also ensure that,
> > > > on
> > > > + * platforms where the [dram_base, dram_base +
> > > > TEXT_OFFSET)
> > > > + * interval is partially occupied by the firmware (like
> > > > on
> > > > APM
> > > > + * Mustang), we can still place the kernel at the
> > > > address
> > > > + * 'dram_base + TEXT_OFFSET'.
> > >
> > > Better drop this entire last sentence (unless it is relevant, but
> > > then
> > > rework it to drop the APM Mustang reference)
> > >
> >
> > As stated above, RISC-V firmware occupies [dram_base, dram_base +
> > 128K). That's why I thought this comment is useful. I should have
> > removed the mustand reference. I will update it.
> >
> > > > + */
> > > > + if (*image_addr == preferred_offset)
> > > > + return EFI_SUCCESS;
> > > > +
> > > > + *image_addr = *reserve_addr = preferred_offset;
> > > > + *reserve_size = round_up(kernel_memsize,
> > > > EFI_ALLOC_ALIGN);
> > > > +
> > > > + status = efi_bs_call(allocate_pages,
> > > > EFI_ALLOCATE_ADDRESS,
> > > > + EFI_LOADER_DATA,
> > > > + *reserve_size / EFI_PAGE_SIZE,
> > > > + (efi_physical_addr_t
> > > > *)reserve_addr);
> > > > +
> > > > + if (status != EFI_SUCCESS) {
> > > > + *reserve_size = kernel_memsize + TEXT_OFFSET;
> > > > + status = efi_low_alloc(*reserve_size,
> > > > MIN_KIMG_ALIGN,
> > > > + reserve_addr);
> > > > +
> > > > + if (status != EFI_SUCCESS) {
> > > > + pr_efi_err("Failed to relocate
> > > > kernel\n");
> > > > + *reserve_size = 0;
> > > > + return status;
> > > > + }
> > > > + *image_addr = *reserve_addr + TEXT_OFFSET;
> > > > + }
> > > > + memcpy((void *)*image_addr, image->image_base,
> > > > kernel_size);
> > > > +
> > > > + return EFI_SUCCESS;
> > > > +}
> > > > --
> > > > 2.24.0
> > > >
> >
> > --
> > Regards,
> > Atish
--
Regards,
Atish
Powered by blists - more mailing lists